Searched for: +
(21 - 40 of 660)

Pages

document
Kamphorst, R. (author), Wu, K. (author), van Baarlen, M. (author), Meesters, G.M.H. (author), van Ommen, J.R. (author)
In this study, the impact of different vibrational modes on the fluidization characteristics of cohesive micro- and nano-silica powder was examined. Fractional pressure drop, bed expansion measurements, and X-ray imaging were utilized to characterize the fluidization quality. The densities of the emulsion phase at the top and bottom of the...
journal article 2024
document
Zou, Yingxue (author), Wu, Shaopeng (author), Chen, Anqi (author), Liu, Quantao (author), Amirkhanian, Serji (author), Xu, S. (author), Yang, Chao (author), Wan, Pei (author), Xu, Haiqin (author), Lu, Ziyu (author)
This study characterized the morphology, high-temperature property, rheological property, adhesion, cohesion, and chemical component of asphalt binder under aqueous solutions of different pH values. Then the physicochemical properties of asphalt binder were comprehensively evaluated by the improved radar chart. The properties of asphalt...
journal article 2024
document
Wu, F. (author), Pfenninger, Stefan (author), Muller, Adrian (author)
Bioenergy from energy crops is a source of negative emissions and carbon-neutral fuels in many 1.5/2 ∘C IPCC pathways. This may compete with other land uses. In contrast, ancillary biomass like by-products and waste is not primarily grown for energy and thus without land/food/feed competition. Here, we examine the availability and environmental...
journal article 2024
document
Xu, Fuqiang (author), Shi, Yu (author), Song, Xianzhi (author), Wu, Wei (author), Song, G. (author), Li, Shuang (author)
The development of hot dry rocks (HDRs) is of great significance to adjusting energy structure, alleviating energy shortage, reducing pollution, etc. Low-permeability granite is the predominant rock type in deep HDRs, making fractures the primary pathways for fluid circulation and heat extraction. The production of HDRs is significantly...
journal article 2024
document
Wu, W. (author), Veljkovic, M. (author), Kolstein, M.H. (author), Pijpers, Richard (author), Maljaars, Johan (author)
Steel Orthotropic Bridge Decks (OBDs) are widely used in long-span and movable bridges. Fatigue resistance analysis plays an important role in the design or assessment of OBDs. One possible fatigue failure is the crack initiating from the weld root of stiffener-to-deck plate connections at crossbeams. A full-scale experimental investigation...
journal article 2024
document
Wang, H. (author), Tao, Jie (author), Wu, Zhangyu (author), Weiland, K.M. (author), Wang, Zuankai (author), Masania, K. (author), Wang, B. (author)
Organic polymer-based composite materials with favorable mechanical performance and functionalities are keystones to various modern industries; however, the environmental pollution stemming from their processing poses a great challenge. In this study, by finding an autonomous phase separating ability of fungal mycelium, a new material...
journal article 2024
document
Wu, D. (author)
Cardiovascular disease is currently one of the biggest threats to health. Specific types of cardiovascular disease include, but are not limited to, coronary artery disease, cardiac valve disorders, or peripheral arterial disease. The current gold standard for managing these conditions incorporates the use of catheters and guidewires for...
doctoral thesis 2023
document
Wu, Y. (author)
Catalysts are often used in challenging chemical reactions to accelerate the reaction rate, increase reaction efficiency, reduce energy consumption, and minimise waste production. In biocatalysis, enzymes or whole cells are used as catalysts with the advantage of reactivity, selectivity and mild reaction condition over chemocatalysis. Nowadays,...
doctoral thesis 2023
document
Wu, B. (author)
Supplementary cementitious materials (SCMs), like fly ash (FA) and blast furnace slag (BFS), are widely used in concrete to partially replace the cement clinker in the production of blended cement or directly replace part of Ordinary Portland cement (OPC) in the concrete. No matter how the SCMs are introduced, they can reduce the cost of...
doctoral thesis 2023
document
Wu, L. (author)
For almost three decades, side-channel analysis has represented a realistic and severe threat to embedded devices' security. As a well-known and influential class of implementation attacks, side-channel analysis has been applied against cryptographic implementations, processors, communication systems, and, more recently, machine learning models....
doctoral thesis 2023
document
Wang, X. (author), Baldi, S. (author), Feng, Xuewei (author), Wu, Changwei (author), Xie, Hongwei (author), De Schutter, B.H.K. (author)
The vector field method was originally proposed to guide a single fixed-wing Unmanned Aerial Vehicle (UAV) towards a desired path. In this work, a non-uniform vector field method is proposed that changes in both magnitude and direction, for the purpose of achieving formations of UAVs. As compared to related work in the literature, the...
journal article 2023
document
Zou, Yingxue (author), Pang, Ling (author), Chen, Shuaichao (author), Xu, S. (author), Wu, Shaopeng (author), Amirkhanian, Serji (author), Xu, Haiqin (author), Zhao, Zenggang (author)
Layered double hydroxides (LDHs) can shield polymeric materials from UV light, which allows reducing material aging and erosion damage of bituminous pavement under physical and chemical action. In this study, the physicochemical properties, aging resistance, and erosion resistance to the aqueous solution of LDHs modified bitumen mastic (BM) were...
journal article 2023
document
Wang, Junpeng (author), Westermann, Rüdiger (author), Wu, J. (author)
We present a novel dehomogenization approach for the efficient design of high-resolution load-bearing structures. The proposed approach builds upon a streamline-based parametrization of the design domain, using a set of space-filling and evenly spaced streamlines in the two mutually orthogonal direction fields that are obtained from...
journal article 2023
document
Mishra, V. (author), Babu, A. (author), Schreurs, R. (author), Wu, K. (author), Hermans, M.J.M. (author), Ayas, C. (author)
Wire and Arc Additive Manufacturing (WAAM) emerged as a manufacturing process for large scale structures with extensive form and design freedom. WAAM can be fully exploited once the relation between the transient thermal history and its relation to microstructure development and resultant mechanical properties is established. This relation...
journal article 2023
document
Ha, Xuan Thao (author), Wu, D. (author), Ourak, Mouloud (author), Borghesan, Gianni (author), Dankelman, J. (author), Menciassi, Arianna (author), Poorten, Emmanuel Vander (author)
In this article, a deep learning method for the shape sensing of continuum robots based on multicore fiber bragg grating (FBG) fiber is introduced. The proposed method, based on an artificial neural network (ANN), differs from traditional approaches, where accurate shape reconstruction requires a tedious characterization of many...
journal article 2023
document
Wu, Huan (author), Luo, Houcai (author), Zhang, Jingping (author), Zheng, Bofeng (author), Lang, Lei (author), Wang, Zeping (author), Zhang, Kouchi (author), Chen, Xianping (author)
To investigate the unclamped inductive switch (UIS) characteristics, 1200 V silicon carbide (SiC) planar MOSFETs with four cell topologies of linear, current sharing linear, square, and hexagon are designed and manufactured. The experimental platform was built and tested. The results show that the single pulse avalanche energy density of the...
journal article 2023
document
Liu, Shuoyan (author), Xue, Bing (author), Yan, Wenyuan (author), Rwei, A.Y. (author), Wu, Changsheng (author)
With a growing focus on properties of softness, miniaturization, and intelligence, extensive research has been focusing on constructing wearable electronic devices facilitating comfort, wearable health monitoring and diagnosis. Among recent progress in the development of wearable bioelectronics, wearable near-infrared spectroscopy (NIRS)...
journal article 2023
document
Ali, A.Z. (author), Wu, Y. (author), Doekhi-Bennani, Y. (author), van der Hoek, J.P. (author)
The presence of organic micro-pollutants (OMPs) in wastewater treatment effluents is becoming a major threat to the water safety for aquatic and human health. Photo-electrocatalytic based advanced oxidation process (AOP) is one of the emerging and effective techniques to degrade OMPs through oxidative mechanism. This study investigated the...
journal article 2023
document
Hou, H. (author), Lai, Joseph H.K. (author), Wu, Hao (author), Wang, T. (author)
This paper aims to investigate the theoretical and practical links between digital twin (DT) application in heritage facilities management (HFM) from a life cycle management perspective and to signpost the future development directions of DT in HFM.<br/><br/>This state-of-the-art review was conducted using a systematic literature review method....
review 2023
document
Perin, G. (author), Wu, L. (author), Picek, S. (author)
The adoption of deep neural networks for profiling side-channel attacks opened new perspectives for leakage detection. Recent publications showed that cryptographic implementations featuring different countermeasures could be broken without feature selection or trace preprocessing. This success comes with a high price: an extensive...
journal article 2023
Searched for: +
(21 - 40 of 660)

Pages