Searched for:
(21 - 40 of 471)

Pages

document
Plaetinck, Wouter (author), Pool, D.M. (author), van Paassen, M.M. (author), Mulder, M. (author)
Time-varying pilot control identification is essential for better understanding of how pilots respond when faced with sudden changes in the dynamics of the vehicle they control, such as when automatic control and stabilization systems disengage or undergo a mode transition. This paper presents the results of a human-in-the-loop experiment...
journal article 2019
document
Mkhoyan, T. (author), Wentink, Mark (author), van Paassen, M.M. (author), Mulder, M. (author), de Graaf, B (author)
When coupled with additional degrees of freedom, centrifuge-based motion platforms can combine the agility of an hexapod-basedmotion platform with the ability of sustaining higher Glevels and an extended motion space. This combination of motion characteristics is required for realistic simulation of extreme flight scenarios. However, a false and...
conference paper 2019
document
Pieters, Marc (author), Zaal, P.M.T. (author), Pool, D.M. (author), Stroosma, O. (author), Mulder, M. (author)
This paper describes an experiment investigating the effects of motion filter order on human manual control tracking behavior and performance. The experiment was performed on two simulators: the Vertical Motion Simulator at NASA Ames Research Center and the SIMONA Research Simulator at Delft University of Technology. Eighteen pilots in the...
conference paper 2019
document
Mulder, K.F. (author)
The challenge of sustainable development requires cities to aim for drastic improvements in the systems that support its vital functions. Innovating these systems can be extremely hard, and might take lots of time. A transparent and democratic strategy is important to guarantee support for change. Such a process should aim at developing...
journal article 2019
document
Concilio, Grazia (author), De Götzen, Amalia (author), Molinari, F (author), Morelli, Nicola (author), Mulder, I.J. (author), Simeone, Luca (author), Tosoni, Ilaria (author), Van Dam, Kirsten (author)
The focus of design studies has shifted from a product-centric perspective to a perspective in which value is defined by and co-created with the consumer, rather than embedded in the output. The reasoning hence focuses on the interplay between innovation and design processes. Moving from an earlier conceptualization of design-driven innovation,...
book chapter 2019
document
Fu, W. (author), van Paassen, M.M. (author), Abbink, D.A. (author), Mulder, M. (author)
Time delays in haptic teleoperation affect the ability of human operators to assess mechanical properties (damping, mass, and stiffness) of the remote environment. To address this, we propose a unified framework for human haptic perception of the mechanical properties of environments with delayed force feedback. In a first experiment, we...
journal article 2019
document
Mulder, I.J. (author), Jaskiewicz, T.J. (author), Morelli, Nicola (author)
Along with the urgent need to reinvent our society, a series of paradigm shifts are already shaping transitions toward a more participatory and digital society. The current work takes stock of the promise of open data as a new resource and elaborates upon the maker movement, which has spurred people’s capacity to participate and has provided...
journal article 2019
document
van Genuchten, E.J.S. (author), Calderon Gonzalez, A. (author), Mulder, I.J. (author)
Cities are increasingly seen as having an important role in tackling societal challenges related to climate change, while open innovation is increasingly accepted as a new way of working for governments. In the current work, we explore the role of open innovation to tackle global challenges on a city level. In the context of the city of...
journal article 2019
document
Geevers, S. (author), Mulder, W.A. (author), van der Vegt, J. J.W. (author)
We analyse the dispersion properties of two types of explicit finite element methods for modelling acoustic and elastic wave propagation on tetrahedral meshes, namely mass-lumped finite element methods and symmetric interior penalty discontinuous Galerkin methods, both combined with a suitable Lax–Wendroff time integration scheme. The...
journal article 2018
document
Landman, H.M. (author), van Paassen, M.M. (author), Groen, Eric L. (author), Bronkhorst, Adelbert W. (author), Mulder, M. (author)
Objective: This study tested whether simulator-based training of pilot responses to unexpected or novel events can be improved by including unpredictability and variability in training scenarios. Background: Current regulations allow for highly predictable and invariable training, which may not be sufficient to prepare pilots for unexpected...
journal article 2018
document
van Paassen, M.M. (author), Borst, C. (author), Ellerbroek, J. (author), Mulder, M. (author), Flach, John M. (author)
Ecological interface design (EID) was originally developed in the context of process control but has been extended into many domains where technology has resulted in both changing work demands and increased opportunities for improved interface applications. This paper gives an overview of the application of the EID to the control of vehicle...
journal article 2018
document
in 't Veld, A.C. (author), Mulder, T.J. (author), Looye, Gertjan H.N. (author)
The Delft University laboratory aircraft Cessna Citation II has the capability to implement and test new auto pilot control laws. The aircraft is equipped as a Fly-By-Wire testbed, that enables the user to control the aircraft through an experimental computer and directly have control over the control surfaces. An extra control stick is mounted...
conference paper 2018
document
Naastepad, C.W.M. (author), Mulder, Jesse M. (author)
(Expected) adverse effects of the ‘ICT Revolution’ on work and opportunities for individuals to use and develop their capacities give a new impetus to the debate on the societal implications of technology and raise questions regarding the ‘responsibility’ of research and innovation (RRI) and the possibility of achieving ‘inclusive and...
journal article 2018
document
Cleij, D. (author), Venrooij, J. (author), Pretto, Paolo (author), Pool, D.M. (author), Mulder, M. (author), Bülthoff, Heinrich H. (author)
Motion cueing algorithms are used in motion simulation to map the inertial vehicle motion onto the limited simulator motion space. This mapping causes mismatches between the unrestricted visual motion and the constrained inertial motion, which results in perceived motion incongruence (PMI). It is still largely unknown what exactly causes...
journal article 2018
document
Drop, F.M. (author), Pool, D.M. (author), van Paassen, M.M. (author), Mulder, M. (author), Bülthoff, Heinrich H. (author)
The human controller (HC) in manual control of a dynamical system often follows a visible and predictable reference path (target). The HC can adopt a control strategy combining closed-loop feedback and an open-loop feedforward response. The effects of the target signal waveform shape and the system dynamics on the human feedforward dynamics...
journal article 2018
document
Xu, Y. (author), Harks, P.P.R.M.L. (author), Hermes, Dorothee C. (author), Haverkate, Lucas A. (author), Unnikrishnan, Sandeep (author), Mulder, F.M. (author)
Li and Na metals have the highest theoretical anode capacity for Li/Na batteries, but the operational safety hazards stemming from uncontrolled growth of Li/Na dendrites and unstable electrode-electrolyte interfaces hinder their real-world applications. Recently, the emergence of 3D conductive scaffolds aimed at mitigating the dendritic...
journal article 2018
document
Mulder, W.A. (author)
One way to deal with the storage problem for the forward source wavefield in reverse time migration and full-waveform inversion is the reconstruction of that wavefield during reverse time stepping along with the receiver wavefield. Apart from the final states of the source wavefield, this requires a strip of boundary values for the whole time...
journal article 2018
document
Van Baelen, D. (author), Ellerbroek, J. (author), van Paassen, M.M. (author), Mulder, M. (author)
Current Airbus aircraft use a fly-by-wire control device: a passive spring-damper system which generates, without any force feedback, an electrical signal to the flight control computer. Additionally, a hard flight envelope protection system is used which can limit the inputs of the pilot when approaching the edges of the flight envelope. To...
conference paper 2018
document
van der El, K. (author), Pool, D.M. (author), van Paassen, M.M. (author), Mulder, M. (author)
This paper investigates how humans use a previewed target trajectory for control in tracking tasks with various controlled element dynamics. The human's hypothesized "near" and "far" control mechanisms are first analyzed offline in simulations with a quasi-linear model. Second, human control behavior is quantified by fitting the same model to...
journal article 2018
document
Puerari, E. (author), de Koning, J.I.J.C. (author), von Wirth, Timo (author), Karré, Philip M. (author), Mulder, I.J. (author), Loorbach, Derk (author)
Citizens and urban policy makers are experimenting with collaborative ways to tackle wicked urban issues, such as today’s sustainability challenges. In this article, we consider one particular way of collaboration in an experimental setting: Urban Living Labs (ULLs). ULLs are understood as spatially embedded sites for the co-creation of...
journal article 2018
Searched for:
(21 - 40 of 471)

Pages