Searched for: +
(21 - 40 of 248)

Pages

document
Van Den Beukel, Tim C. (author), Van Der Toorn, Janine E. (author), Vernooij, Meike W. (author), Kavousi, Maryam (author), Akyildiz, A.C. (author), De Jong, Pim A. (author), Van Der Lugt, Aad (author), Ikram, M. Kamran (author), Bos, Daniel (author)
Background: Accumulating evidence highlights the existence of distinct morphological subtypes of intracranial carotid arteriosclerosis. So far, little is known on the prevalence of these subtypes and subsequent stroke risk in the general population. We determined the prevalence of morphological subtypes of intracranial arteriosclerosis and...
journal article 2022
document
Tyuryukanov, I. (author), Popov, M. (author), Bos, Jorrit A. (author), van der Meijden, M.A.M.M. (author), Terzija, Vladimir (author)
This paper presents a new formulation for intentional controlled islanding (ICI) of power transmission grids based on mixed-integer linear programming (MILP) DC optimal power flow (OPF) model. We highlight several deficiencies of the most well-known formulation for this problem and propose new enhancements for their improvement. In particular...
journal article 2022
document
Rahbari, A. (author), Hartkamp, Remco (author), Moultos, O. (author), Bos, Albert (author), van den Broeke, L.J.P. (author), Ramdin, M. (author), Dubbeldam, David (author), Lyulin, Alexey V. (author), Vlugt, T.J.H. (author)
One of the important parameters in water management of proton exchange membranes is the electro-osmotic drag (EOD) coefficient of water. The value of the EOD coefficient is difficult to justify, and available literature data on this for Nafion membranes show scattering from in experiments and simulations. Here, we use a classical all-atom...
journal article 2022
document
Atreya, V. (author), van Dokkum, J.S. (author), Bos, C. (author), Santofimia, Maria Jesus (author)
The volume increase and shape change during austenite to martensite transformation in dual-phase (DP) steels are largely accommodated in the microstructure by the deformation of the surrounding ferrite matrix. Accurate estimation of transformation-induced deformation of ferrite via experiments and modeling is essential for predicting the...
journal article 2022
document
Slooter, R.J. (author), Sluiter, M.H.F. (author), Kranendonk, Winfried G.T. (author), Bos, C. (author)
A reference-free modified embedded atom method (RF-MEAM) potential for iron has been constructed. The new potential is made to predict both bcc and fcc (α-Fe and γ-Fe) lattice properties, with a special interest in modelling in the 800-1300 K temperature range. This is the range in which transformations and key processes in steel occur. RF...
journal article 2022
document
Shah, V. (author), Sedighiani, K. (author), van Dokkum, J.S. (author), Bos, C. (author), Roters, F. (author), Diehl, M. (author)
Predicting microstructure and (micro-)texture evolution during thermo-mechanical processing requires the combined simulation of plastic deformation and recrystallization. Here, a simulation approach based on the coupling of a full-field dislocation density based crystal plasticity model and a cellular automaton model is presented. A...
journal article 2022
document
Bos, P. (author), Bakker, C.A. (author), Balkenende, R. (author), Sprecher, B. (author)
This design review evaluates the use of bio-based plastics in durable consumer products. The main question is: how does the use of bio-based plastics influence the product’s design, functionality, marketing & communication, and sustainability? Although higher material prices would lead one to expect that higher value applications would be...
conference paper 2022
document
Asprone, Domenico (author), Menna, Costantino (author), Bos, Freek (author), Mata-Falcón, Jaime (author), Ferrara, Liberato (author), Auricchio, Ferdinando (author), Cadoni, Ezio (author), Cunha, Vítor M. C. F. (author), Esposito, Laura (author), Fromm, Asko (author), Grunewald, S. (author), Kloft, Harald (author), Mechtcherine, Viktor (author), Nerella, Venkatesh Naidu (author), Schipper, H.R. (author)
The form freedom enabled by digital fabrication with concrete technologies provides advantages for a wide range of concrete based objects, from architectural to structural elements. The current chapter focuses on the specifics of structural design and engineering of DFC with emphasis on those technologies based on Additive Manufacturing with...
book chapter 2022
document
Wangler, Timothy (author), Flatt, Robert J. (author), Roussel, Nicolas (author), Perrot, Arnaud (author), Sonebi, Mohammed (author), Wolfs, Rob (author), Bos, Freek (author), Lowke, Dirk (author), Grunewald, S. (author)
Digital fabrication with cementitious materials is a rapidly growing field of research in which the evolution of strength during the various processes, such as 3D printing, is the key controlling parameter. The strength evolves over multiple orders of magnitude during the process, and thus, it is essential to properly characterize the strength...
book chapter 2022
document
Buswell, R. A. (author), Bos, F. P. (author), Silva, Wilson Ricardo Leal da (author), Hack, N. (author), Kloft, Harald (author), Lowke, Dirk (author), Freund, Niklas (author), Fromm, Asko (author), Dini, E. (author), Wangler, Timothy (author), Lloret-Fritschi, E. (author), Schipper, H.R. (author), Mechtcherine, Viktor (author), Perrot, Arnaud (author), Vasilic, K. (author), Roussel, Nicolas (author)
The need for methods for forming concrete has existed for as long as concrete has been used in constructing the built environment. Creating flat, rectilinear formers have traditionally been the cost and time efficient default for the majority of applications. The desire for greater design freedom and the drive to automate construction...
book chapter 2022
document
Nefs, Karsten (author), van Overmeir, A.L. (author), Salet, Theo A.M. (author), Suiker, A. S.J. (author), Šavija, B. (author), Schlangen, E. (author), Bos, Freek (author)
Previous research has shown that the material properties of a three-dimensional printed strain hardening cementitious composite (3DP-SHCC) can significantly vary, depending on the printing system with which it is produced. However, limited research has been performed on the reproducibility of hardened mechanical properties under identical...
book chapter 2022
document
Atreya, V. (author), Bos, C. (author), Santofimia, Maria Jesus (author)
During the production of DP steels, the volume expansion and shape change accompanying the austenite to martensite transformation is accommodated by the deformation of surrounding ferrite grains. The extent of the deformation in ferrite grains ultimately affects the mechanical properties of DP steels. Using electron backscatter diffraction...
journal article 2021
document
Slooter, R.J. (author), Sluiter, M.H.F. (author), Kranendonk, Winfried (author), Bos, C. (author)
A new approximation to the equations describing Classical Nucleation and Growth Theories, is proposed providing quick, and intuitive insight. It gives a prediction of the mean precipitate radius and number density development under quasi-isothermal conditions. Current “mean-radius”, and “multi-class” approaches to modelling classical nucleation...
journal article 2021
document
Gijsen, F.J.H. (author), Vis, Bas (author), Barrett, Hilary E. (author), Zadpoor, A.A. (author), Verhagen, Hence J. (author), Bos, Daniel (author), van der Steen, A.F.W. (author), Akyildiz, A.C. (author)
Objective: Atherosclerotic plaque rupture in carotid arteries is a major source of cerebrovascular events. Calcifications are highly prevalent in carotid plaques, but their role in plaque rupture remains poorly understood. This work studied the morphometric features of calcifications in carotid plaques and their effect on the stress...
journal article 2021
document
Quaeghebeur, Erik (author), Bos, R. (author), Zaaijer, M B (author)
This paper presents a heuristic building block for wind farm layout optimization algorithms. For each pair of wake-interacting turbines, a vector is defined. Its magnitude is proportional to the wind speed deficit of the waked turbine due to the waking turbine. Its direction is chosen from the inter-turbine, downwind, or crosswind directions....
journal article 2021
document
Traka, K. (author), Sedighiani, K. (author), Bos, C. (author), Galan Lopez, J. (author), Angenendt, Katja (author), Raabe, Dierk (author), Sietsma, J. (author)
A cellular automaton algorithm for curvature-driven coarsening is applied to a cold-rolled interstitial-free steel's microstructure - obtained through electron backscatter diffraction (EBSD). Recrystallization nucleation occurs naturally during the simulation, due to the highly heterogeneous and hence competitive growth among pre-existing ...
journal article 2021
document
Bos, R.W. (author), Wellens, P.R. (author)
To study how an extreme wave load on a maritime structure causes structural deformation, an experiment is conducted to measure the response of a one degree-of-freedom pendulum in a focused, breaking wave. The tube that makes up the base of the pendulum covers almost the entire width of the tank so that three-dimensional effects can be...
journal article 2021
document
de Maar, Josanne S. (author), Rousou, Charis (author), van Elburg, Benjamin (author), Vos, H.J. (author), Lajoinie, Guillaume P.R. (author), Bos, Clemens (author), Moonen, Chrit T.W. (author), Deckers, Roel (author)
Chemotherapy efficacy is often reduced by insufficient drug uptake in tumor cells. The combination of ultrasound and microbubbles (USMB) has been shown to improve drug delivery and to enhance the efficacy of several drugs in vitro and in vivo, through effects collectively known as sonopermeation. However, clinical translation of USMB therapy...
journal article 2021
document
van Dokkum, J.S. (author), Bos, C. (author), Offerman, S.E. (author), Sietsma, J. (author)
Intricate knowledge of dislocation networks in metals has proven paramount in understanding the constitutive behaviour of these materials but current experimental methods yield limited information on the characteristics of these networks. Recently, the isotropic anelastic response of metals has been used to investigate complex dislocation...
journal article 2021
document
Bos, Kelly (author), Dongelmans, Dave A. (author), Groeneweg, J. (author), Legemate, Dink A. (author), Leistikow, Ian P. (author), Van Der Laan, Maarten J. (author)
Background The recurrence of sentinel events (SEs) is a persistent problem worldwide, despite repeated analyses and recommendations formulated to prevent recurrence. Research suggests this is partly attributable to the quality of the recommendations, and determining if a recommendation will be effective is not yet covered by an adequate...
journal article 2021
Searched for: +
(21 - 40 of 248)

Pages