Searched for:
(21 - 40 of 48)

Pages

document
Panea, I. (author), Drijkoningen, G.G. (author)
Coherent noise generated by surface waves or ground roll within a heterogeneous near surface is a major problem in land seismic data. Array forming based on single-sensor recordings might reduce such noise more robustly than conventional hardwired arrays. We use the minimum-variance distortionless-response (MVDR) beamformer to remove (aliased)...
journal article 2008
document
Van Veldhuizen, E.J. (author), Blacquiere, G. (author), Berkhout, A.J. (author)
Increasingly, we must deal with complex subsurface structures in seismic exploration, often resulting in poor illumination and, therefore, poor image quality. Consequently, it is desirable to take into consideration the effects of wave propagation in the subsurface structure when designing an acquisition geometry. We developed a new, model-based...
journal article 2008
document
Chitu, D.A. (author), Al-Ali, M.N. (author), Verschuur, D.J. (author)
In conventional migration velocity analysis methods, a velocity model is estimated that results in flattened events in common-image gathers. However, after this process, no information is available on the accuracy of this velocity model. A statistical analysis of velocity-model parameters is very difficult because of the integrated nature of the...
journal article 2008
document
El Yadari, N. (author), Ernst, F. (author), Mulder, W. (author)
The effect of the near surface on seismic land data can be so severe that static corrections are insufficient. Full-waveform inversion followed by redatuming may be an alternative, but inversion will work only if the starting model is sufficiently close to the true model. As a first step toward determining a viscoelastic near-surface model, we...
journal article 2008
document
Wapenaar, C.P.A. (author), Van der Neut, J.R. (author), Ruigrok, E.N. (author)
We introduce seismic interferometry of passive data by multidimensional deconvolution (MDD) as an alternative to the crosscorrelation method. Interferometry by MDD has the potential to correct for the effects of source irregularity, assuming the first arrival can be separated from the full response. MDD applications can range from reservoir...
journal article 2008
document
Jardani, A. (author), Revil, A. (author), Slob, E.C. (author), Söllner, W. (author)
The interpretation of seismoelectrical signals is a difficult task because coseismic and seismoelectric converted signals are recorded simultaneously and the seismoelectric conversions are typically several orders of magnitude smaller than the coseismic electrical signals. The seismic and seismoelectric signals are modeled using a finite-element...
journal article 2009
document
Van der Burg, D. (author), Verdel, A. (author), Wapenaar, C.P.A. (author)
Trace inversion for reservoir parameters is affected by angle averaging of seismic data and wavelet distortion on the migration image. In an alternative approach to stochastic trace inversion, the data are inverted prestack before migration using 3D dynamic ray tracing. This choice makes it possible to interweave trace inversion with Kirchhoff...
journal article 2009
document
Draganov, D.S. (author), Campman, X. (author), Thorbecke, J.W. (author), Verdel, A. (author), Wapenaar, C.P.A. (author)
One application of seismic interferometry is to retrieve the impulse response (Green's function) from crosscorrelation of ambient seismic noise. Various researchers show results for retrieving the surface-wave part of the Green's function. However, reflection retrieval has proven more challenging. We crosscorrelate ambient seismic noise,...
journal article 2009
document
Van Groenestijn, G.J.A. (author), Verschuur, D.J. (author)
ost wave-equation-based multiple removal algorithms are based on prediction and subtraction of multiples. Especially for shallow water, the prediction strongly relies on a correct interpolation of the missing near offsets. The subtraction of predicted multiples from the data can easily lead to the distortion of primaries if primaries and...
journal article 2009
document
Abubakar, A. (author), Hu, W. (author), Habashy, T.M. (author), Van den Berg, P.M. (author)
We have applied the finite-difference contrast-source inversion (FDCSI) method to seismic full-waveform inversion problems. The FDCSI method is an iterative nonlinear inversion algorithm. However, unlike the nonlinear conjugate gradient method and the Gauss-Newton method, FDCSI does not solve any full forward problem explicitly in each iterative...
journal article 2009
document
Wapenaar, C.P.A. (author), Slob, E.C. (author), Snieder, R. (author)
We have analyzed the far-field approximation of the Green's function representation for seismic interferometry. By writing each of the Green's functions involved in the correlation process as a superposition of a direct wave and a scattered wave, the Green's function representation is rewritten as a superposition of four terms. When the...
journal article 2010
document
Van Groenestijn, G.J.A. (author), Verschuur, D.J. (author)
For passive seismic data, surface multiples are used to obtain an estimate of the subsurface responses, usually by a crosscorrelation process. This crosscorrelation process relies on the assumption that the surface has been uniformly illuminated by subsurface sources in terms of incident angles and strengths. If this is not the case, the...
journal article 2010
document
Dragoset, B. (author), Verschuur, D.J. (author), Moore, I. (author), Bisley, R. (author)
Surface-related multiple elimination (SRME) is an algorithm that predicts all surface multiples by a convolutional process applied to seismic field data. Only minimal preprocessing is required. Once predicted, the multiples are removed from the data by adaptive subtraction. Unlike other methods of multiple attenuation, SRME does not rely on...
journal article 2010
document
Wapenaar, C.P.A. (author), Draganov, D.S. (author), Snieder, R. (author), Campman, X. (author), Verdel, A. (author)
Seismic interferometry involves the crosscorrelation of responses at different receivers to obtain the Green's function between these receivers. For the simple situation of an impulsive plane wave propagating along the x-axis, the crosscorrelation of the responses at two receivers along the x-axis gives the Green's function of the direct wave...
journal article 2010
document
Wapenaar, C.P.A. (author), Slob, E.C. (author), Snieder, R. (author), Curtis, A. (author)
In the 1990s, the method of time-reversed acoustics was developed. This method exploits the fact that the acoustic wave equation for a lossless medium is invariant for time reversal. When ultrasonic responses recorded by piezoelectric transducers are reversed in time and fed simultaneously as source signals to the transducers, they focus at the...
journal article 2010
document
Ruigrok, E.N. (author), Campman, X. (author), Draganov, D.S. (author), Wapenaar, K. (author)
In recent years, there has been an increase in the deployment of relatively dense arrays of seismic stations. The availability of spatially densely sampled global and regional seismic data has stimulated the adoption of industry-style imaging algorithms applied to converted- and scattered-wave energy from distant earthquakes, leading to...
journal article 2010
document
Tetyukhina, D. (author), Van Vliet, L.J. (author), Luthi, S.M. (author), Wapenaar, C.P.A. (author)
Fluvio-deltaic sedimentary systems are of great interest for explorationists because they can form prolific hydrocarbon plays. However, they are also among the most complex and heterogeneous ones encountered in the subsurface, and potential reservoir units are often close to or below seismic resolution. For seismic inversion, it is therefore...
journal article 2010
document
El Allouche, N. (author), Drijkoningen, G.G. (author), Van der Neut, J.R. (author)
A widespread use of converted waves for shallow marine applications is hampered by spatial aliasing and field efficiency. Their short wavelengths require dense spatial sampling which often needs to be achieved by receivers deployed on the seabed. We adopted a new methodology where the dense spatial sampling is achieved in the common-receiver...
journal article 2010
document
El Allouche, N. (author), Drijkoningen, G.G. (author), Versteeg, W. (author), Ghose, R. (author)
Seismic waves converted from compressional to shear mode in the shallow subsurface can be useful not only for obtaining shear-wave velocity information but also for improved processing of deeper reflection data. These waves generated at deep seas have been used successfully in hydrocarbon exploration; however, acquisition of good-quality...
journal article 2011
document
Verschuur, D.J. (author), Berkhout, A.J. (author)
This paper focuses on the concept of using blended data and multiple scattering directly in the migration process, meaning that the blended input data for the proposed migration algorithm includes blended surface-related multiples. It also means that both primary and multiple scattering contribute to the seismic image of the subsurface....
journal article 2011
Searched for:
(21 - 40 of 48)

Pages