Searched for:
(41 - 60 of 112,316)

Pages

document
Managundi, Kavya (author)
Locating people inside buildings is still an unsolved problem. There is a lot
of research going on in this field and many different solutions using different
techniques have been proposed. However, there is no widely accepted indoor
localization solution like how GPS is for outdoor localization due to less accuracy, higher hardware...
master thesis 2019
document
den Boer, Claire (author)
This thesis proposes an innovation strategy to leverage the potential of connected vehicles for the fleet of LeasePlan, the global leader in automobile leasing and fleet management. This strategy has been developed through an extensive analysis of the internal environment, customer trends, industry developments, and emerging technologies in...
master thesis 2019
document
van Gemeren, Wouter (author)
A parametric study, using the FEM-software package ABAQUS, validated on experimental results found by Abspoel, was conducted on S690 steel plate girders to address if the results of the previous researches was valid. Using a slightly different analytical model the results show the maximum web slenderness of this steel grade in both 6000 mm2 and...
master thesis 2019
document
Khamis, Karim (author)
Miniaturization of spacecraft has been gaining wide interest in the space industry, given its potential for reducing space missions' costs and providing a novel approach to enhancing and facilitating spaceflight. Recently, a lot of research has been successfully put into this field along with the advancements that make it more feasible, though a...
master thesis 2019
document
Cai, Yefeng (author)
Micro-Doppler patterns of multi-propeller drones measured by radar systems are widely used in the classification of different drones, since the micro-Doppler patterns illustrate the velocity and motion properties of the drones. However, on this topic, there are a few issues the current researches have not tackled yet, and these will be discussed...
master thesis 2019
document
Alvarez Mieles, M.G. (author)
Wetlands are among the most productive environments in the world. Around 6% of the Earth's land surface is covered by wetlands, which are key to preserving biodiversity. Wetlands provide multiple services like a source for water supply and a shelter for numerous species of fauna and flora. Wetlands are therefore of immense socio-economic as well...
doctoral thesis 2019
document
Ploussard, Q. (author)
The aim of Transmission Expansion Planning (TEP) studies is to decide which, where, and when new grid elements should be built in order to minimize the total system cost. The lumpiness of the investment decisions, together with the large size of the problem, make the problem very hard to solve. Consequently, methods should be put in place to...
doctoral thesis 2019
document
Hulsebosch, Coen (author)
In situations with spatial limitations where a bridge is desired, a skewed bridge is a solution. The bridge deck of a skewed bridge has the shape of a parallelogram, in which the angle that remains in the acute corners is defined as the skew angle. This thesis focuses on the design of reinforced concrete skewed slab highway bridges that are...
master thesis 2019
document
Tims, Frido (author)
Already since the start of civilisation dredging is carried out to create and maintain waterways and ports or to create new land. In recent times the scale of dredging and awareness of potential environmental impact of dredging have increased drastically. An often used dredging vessel is the trailing suction hopper dredger (TSHD). A TSHD pumps...
master thesis 2019
document
Pardo Arteaga, Gabriela (author)
Sailing against the wind follows a zig-zag trajectory. To find the optimal time and path-trajectory to move from one target to another during a race, this study analyzes how the wind determines the optimal time-path of Lasers, one of the smallest sailboats that compete during the summer Olympic Games.
To answer this question, this study uses...
master thesis 2019
document
Yin, J. (author)
Weather observation is becoming more important than ever because extreme weather, such as tropical cyclones, thunderstorms and heavy rain, is more common nowadays. To observe and forecast the atmospheric phenomena at high spatial and temporal resolution, weather radar is well recognized as an effective tool. The prerequisite of using weather...
doctoral thesis 2019
document
Bhaskar, P. (author)
This doctoral thesis reports studies on effects of temperature and density on the
mobility and recombination dynamics of charge carriers in low-dimensional van
der Waals materials.
doctoral thesis 2019
document
SHARMA, Sparsh (author)
The increasing complexity of mechanical systems has resulted in an increased usage and dependence on data driven modelling techniques in order to obtain simple yet accurate models of these systems. Neural networks have emerged as a popular modelling choice due to their proven ability to learn complex nonlinear relationships between inputs and...
master thesis 2019
document
Menting, Joris (author)
This report is the result of the graduation project of Joris Menting for SWKGroep. The project concludes the master program Design for Interaction at the Delft University of Technology. SWKGroep asked for an innovative child care tool for children of 10-14 years old. The project description offered the designer much freedom. The initial design...
master thesis 2019
document
Semwal, Anant (author)
Inter-Autonomous System (AS) route monitoring is the process of collecting the inter-AS routing information. This information flows on the Internet in the form of BGP UPDATE messages, and the BGP data are the messages obtained by the monitors. Existing methods of monitor placement rely on the network topology which provides inadequate visibility...
master thesis 2019
document
Anbarasu, Sri Nithya Rupine (author)
With the rise of globalisation, countries have become more connected financially and global cross-border investment flows have become more common. FDI is an important form of cross-border flow which is responsible for the spread of technology across countries and is the main source of external finance for emerging countries. In the last two...
master thesis 2019
document
Milewski, Damian (author)
The environmental control system is an essential system on all modern aircraft and is the largest consumer of secondary power. System power consumption is potentially reduced by using electric compressors to feed the system, instead of bleed air. The aim of this research is to provide a first order estimate of the potential benefits on mission...
master thesis 2019
document
Agarwal, G. (author)
Preventing solidification cracking is an essential prerequisite for the safety of a welded structure. An undetected solidification crack has the potential to cause premature failure during service. Two conditions generated by a weld thermal cycle are responsible for the initiation of solidification cracks. The first is the presence of excessive...
doctoral thesis 2019
document
Touloumis, Konstantinos (author)
The skyline operator has been proposed to bridge the gap between traditional and multimedia database systems by finding the optimal objects according to the notion of Pareto dominance. According to the notion of Pareto dominance an object dominates another if it is better in one attribute and equal in all others. Skyline sets end up being pretty...
master thesis 2019
document
Giesbers, Charlotte (author)
The acute obstetrics (AO) sector in the Netherlands faces two challenges. The increasing difficulty to find personnel and the closing down of several locations have put a major pressure on the existing AO locations. This has led to questions about the quality of the spatial distribution. The measures currently in place are based the travel time...
master thesis 2019
Searched for:
(41 - 60 of 112,316)

Pages