Searched for:
(41 - 60 of 420)

Pages

document
Zhi, Jie (author), Chen, B. Y. (author), Tay, Tong Earn (author)
In this paper, the recently-developed floating node method is extended for damage analysis of laminated composites with large deformations. Strong discontinuities including interfacial delamination and matrix cracks are explicitly represented by geometrically nonlinear kinematics. Interactions between these two kinds of failure patterns are...
journal article 2018
document
Lu, X. (author), Chen, B. Y. (author), Tan, V. B.C. (author), Tay, T. E. (author)
The cohesive element has been widely employed to model delamination and matrix cracking in composite materials. However, an extremely fine mesh along the potential crack path is required to achieve accurate predictions of stresses within the cohesive zone. A sufficient number of cohesive elements must be present within the cohesive zone ahead...
journal article 2018
document
Chen, N. (author), Wang, M. (author), Alkim, Tom (author), van Arem, B. (author)
Automated vehicles are designed to free drivers from driving tasks and are expected to improve traffic safety and efficiency when connected via vehicle-to-vehicle communication, that is, connected automated vehicles (CAVs). The time delays and model uncertainties in vehicle control systems pose challenges for automated driving in real world....
journal article 2018
document
Chen, C. (author)
This thesis describes the analysis, design and evaluation of front-end application-specific integrated circuits (ASICs) for 3-D medical ultrasound imaging, with the focus on the receive electronics. They are specifically designed for next-generation miniature 3-D ultrasound devices, such as transesophageal echocardiography (TEE), intracardiac...
doctoral thesis 2018
document
Lu, X. (author), Chen, B. Y. (author), Tan, V. B.C. (author), Tay, T. E. (author)
A three-dimensional separable cohesive element (SCE) is proposed to enable the modelling of interaction between matrix cracking and interfacial delamination in laminated fibre-reinforced composite materials. It is demonstrated that traditional cohesive elements are incapable of modelling the coupled failure mechanisms accurately if...
journal article 2018
document
Feng, J. (author), Chen, Dong (author), Sediq, Ahmad S. (author), Romeijn, Stefan (author), Tichelaar, F.D. (author), Jiskoot, Wim (author), Koper, M.T.M. (author)
A key enabling step in leveraging the properties of nanoparticles (NPs) is to explore new, simple, controllable, and scalable nanotechnologies for their syntheses. Among "wet" methods, cathodic corrosion has been used to synthesize catalytic aggregates with some control over their size and preferential faceting. Here, we report on a...
journal article 2018
document
Wang, Rongxiao (author), Chen, B. (author), Qiu, S. (author), Ma, Liang (author), Zhu, Zhengqiu (author), Wang, Yiping (author), Qiu, Xiaogang (author)
Locating and quantifying the emission source plays a significant role in the emergency management of hazardous gas leak accidents. Due to the lack of a desirable atmospheric dispersion model, current source estimation algorithms cannot meet the requirements of both accuracy and efficiency. In addition, the original optimization algorithm can...
journal article 2018
document
Zhu, Zhengqiu (author), Chen, B. (author), Qiu, S. (author), Wang, Rongxiao (author), Wang, Yiping (author), Ma, Liang (author), Qiu, Xiaogang (author)
The chemical industry is of paramount importance to the world economy and this industrial sector represents a substantial income source for developing countries. However, the chemical plants producing inside an industrial district pose a great threat to the surrounding atmospheric environment and human health. Therefore, designing an...
journal article 2018
document
Wang, P (author), Chen, Wei (author), Chiang, Fu-Kuo (author), Dugulan, A.I. (author), Song, Yuanjun (author), Pestman, R (author), Zhang, K (author), Yao, Jinsong (author), Feng, Bo (author), Miao, Ping (author), Xu, Wayne (author), Hensen, Emiel J.M. (author)
journal article 2018
document
Janjic, Jovana (author), Tan, M. (author), Daeichin, V. (author), Noothout, E.C. (author), Chen, C. (author), Chen, Z. (author), Chang, Z.Y. (author), Beurskens, Robert H.S.H. (author), van Soest, G. (author), van der Steen, A.F.W. (author), Verweij, M.D. (author), Pertijs, M.A.P. (author), de Jong, N. (author)
Intravascular ultrasound is an imaging modality used to visualize atherosclerosis from within the inner lumen of human arteries. Complex lesions like chronic total occlusions require forward-looking intravascular ultrasound (FL-IVUS), instead of the conventional side-looking geometry. Volumetric imaging can be achieved with 2D array...
journal article 2018
document
Chen, Peng (author), Huang, Xiongchuan (author), Chen, Y. (author), Wu, Lianbo (author), Staszewski, R.B. (author)
To characterize an on-chip programmable delay in a low-cost and high-resolution manner, a built-in self-test based on a first-order ΔΣ time-to-digital converter with self-calibration is proposed and implemented in TSMC 28-nm CMOS. The system is self-contained, and only one digital clock is needed for the measurements. A...
journal article 2018
document
Chen, G. (author), Davis, D.J. (author), Krause, Markus (author), Aivaloglou, E. (author), Hauff, C. (author), Houben, G.J.P.M. (author)
Massive Open Online Courses (MOOCs) aim to educate the world. More often than not, however, MOOCs fall short of this goal — a majority of learners are already highly educated (with a Bachelor degree or more) and come from specific parts of the (developed) world. Learners from developing countries without a higher degree are underrepresented,...
journal article 2018
document
Wang, Rongxiao (author), Chen, B. (author), Qiu, S. (author), Zhu, Zhengqiu (author), Wang, Yiduo (author), Wang, Yiping (author), Qiu, Xiaogang (author)
Dispersion prediction plays a significant role in the management and emergency response to hazardous gas emissions and accidental leaks. Compared with conventional atmospheric dispersion models, machine leaning (ML) models have both high accuracy and efficiency in terms of prediction, especially in field cases. However, selection of model...
journal article 2018
document
Yang, Ning (author), Yang, Daoguo (author), Zhang, G.Q. (author), Chen, Liangbiao (author), Liu, Dongjing (author), Cai, Miao (author), Fan, Xuejun (author)
The effects of graphene stacking are investigated by comparing the results of methane adsorption energy, electronic performance, and the doping feasibility of five dopants (i.e., B, N, Al, Si, and P) via first-principles theory. Both zigzag and armchair graphenes are considered. It is found that the zigzag graphene with Bernal stacking has...
journal article 2018
document
Liu, C (author), Cheng, Gang (author), Chen, Xihui (author), Pang, Y. (author)
Given local weak feature information, a novel feature extraction and fault diagnosis method for planetary gears based on variational mode decomposition (VMD), singular value decomposition (SVD), and convolutional neural network (CNN) is proposed. VMD was used to decompose the original vibration signal to mode components. The mode matrix was...
journal article 2018
document
Zhu, Zhengqiu (author), Qiu, S. (author), Chen, Bin (author), Wang, Rongxiao (author), Qiu, Xiaogang (author)
The accurate prediction of hazardous gas dispersion process is essential to air quality monitoring and the emergency management of contaminant gas leakage incidents in a chemical cluster. Conventional Gaussian-based dispersion models can seldom give accurate predictions due to inaccurate input parameters and the computational errors. In order...
journal article 2018
document
Qiao, Tiezhu (author), Chen, Lulu (author), Pang, Y. (author), Yan, Gaowei (author)
Infrared and visible light image fusion technology is a hot spot in the research of multi-sensor fusion technology in recent years. Existing infrared and visible light fusion technologies need to register before fusion because of using two cameras. However, the application effect of the registration technology has yet to be improved. Hence, a...
journal article 2018
document
Kuo, Feng-Wei (author), Babaie, M. (author), Chen, Huan-Neng (Ron) (author), Cho, Lan-Chou (author), Jou, Chewn-Pu (author), Chen, Mark (author), Staszewski, R.B. (author)
We propose a time-predictive architecture of an all-digital PLL (ADPLL) for cellular radios, which is optimized for advanced CMOS. It is based on a 1/8-length time-to-digital converter (TDC) of stabilized 7-ps resolution, as well as wide tuning range, and fine-resolution class-F digitally controlled oscillator (DCO) with only switchable metal...
journal article 2018
document
Wang, Kan (author), Chen, Pei (author), Teunissen, P.J.G. (author)
In this contribution, we study the phase-only ambiguity resolution and positioning performance of GPS for short baselines. It is well known that instantaneous (single-epoch) ambiguity resolution is possible when both phase and code (pseudorange) data are used. This requires, however, a benign multipath environment due to the severe effects...
journal article 2018
document
Chen, Z. (author), Qu, Yingxia (author), Zeilstra, Christiaan (author), van der Stel, Jan (author), Sietsma, J. (author), Yang, Y. (author)
Melting and reduction of fine iron ore particles in the gas environment of a HIsarna smelting cyclone is a critically important topic, but very limited information is currently available except for some experimental data from high temperature drop tube furnace (HTDF). This work discusses the equilibrium state of reacting iron ore in the HTDF...
journal article 2018
Searched for:
(41 - 60 of 420)

Pages