Searched for: +
(41 - 60 of 248)

Pages

document
Bos, R.W. (author), Wellens, P.R. (author)
Maritime structures operating out at sea experience large changes in wetted area because of free surface waves. Although these conditions are typical for maritime applications, a fundamental experiment that includes a structure in the air–water interface undergoing transitions from dry to wet and back does not appear to exist. This paper aims...
journal article 2021
document
Veldhuis, J.H. (author), Bos, R.M.H. (author), Potemans, A. (author), Leclercq, E.M. (author), Kraaijeveld, Jasper (author)
Uit verschillende onderzoeken blijkt dat de architect een belangrijke rol vervult bij de totstandkoming van circulaire bouwprojecten. Tijdens de ontwerpfase worden immers keuzes gemaakt die het wel of niet circulair zijn van een bouwproject grotendeels bepalen (Galle et al,2018; Osmani et al, 2008). Toch heeft de helft van de architectenbureaus...
other 2020
document
Mulders, S.P. (author), Zaaijer, M B (author), Bos, R. (author), van Wingerden, J.W. (author)
Standardized, easy to use, and preferably open-source research software is an important aspect in supporting and solidifying the wind turbine community. To this end, three contributions in the form of open-source software projects are presented in this paper. First, a community-driven wind turbine baseline controller, the Delft Research...
journal article 2020
document
de Groot, Andres (author), van den Boom, Bastijn Jg (author), van Genderen, Romano M. (author), Coppens, Joris (author), van Veldhuijzen, John (author), Bos, Joop (author), Hoedemaker, Hugo (author), Negrello, M.J.F. (author), Willuhn, Ingo (author), De Zeeuw, Chris I. (author), Hoogland, Tycho M. (author)
Miniaturized fluorescence microscopes (miniscopes) have been instrumental to monitor neural signals during unrestrained behavior and their open-source versions have made them affordable. Often, the footprint and weight of open-source miniscopes is sacrificed for added functionality. Here, we present NINscope: a light-weight miniscope with a...
journal article 2020
document
Kalloe, Nikhil (author), Bos, Jorrit A. (author), Rueda, José L. (author), van der Meijden, M.A.M.M. (author), Palensky, P. (author)
The last decade has seen an immense growth in renewable energy sources such as solar photovoltaic (PV) plants due to environmental concerns. Due to this rapid growth, solar PV plants are starting to have a larger influence on power system stability and thus their dynamic behavior cannot be ignored in stability studies. The lack of well...
journal article 2020
document
Buswell, R. A. (author), da Silva, W. R.Leal (author), Bos, F. P. (author), Schipper, H.R. (author), Lowke, D. (author), Hack, N. (author), Kloft, H. (author), Mechtcherine, V. (author), Wangler, T. (author), Roussel, N. (author)
Digital Fabrication with Concrete (DFC) encompasses 3D Concrete Printing (3DCP) and many other methods of production. DFC is emerging from an era of invention and demonstration to one where the merits of one principle over another needs to be quantified systematically. DFC technologies vary in characteristics, complexity and maturity which...
journal article 2020
document
Bos, R.A. (author), Nizamis, Kostas (author), Koopman, Bart F.J.M. (author), Herder, J.L. (author), Sartori, Massimo (author), Plettenburg, D.H. (author)
With recent improvements in healthcare, individuals with Duchenne muscular dystrophy (DMD) have prolonged life expectancy, and it is therefore vital to preserve their independence. Hand function plays a central role in maintaining independence in daily living. This requires sufficient grip force and the ability to modulate it with no...
journal article 2020
document
Fernandez Rivas, David (author), Boffito, Daria C. (author), Faria-Albanese, Jimmy (author), Glassey, Jarka (author), Afraz, Nona (author), Akse, Henk (author), Boodhoo, Kamelia V.K. (author), Bos, Rene (author), Cantin, Judith (author), (Emily) Chiang, Yi Wai (author), Commenge, Jean Marc (author), Dubois, Jean Luc (author), Galli, Federico (author), de Mussy, Jean Paul Gueneau (author), Harmsen, Jan (author), Kalra, Siddharth (author), Keil, Frerich J. (author), Morales-Menendez, Ruben (author), Navarro-Brull, Francisco J. (author), Noël, Timothy (author), Ogden, Kim (author), Patience, Gregory S. (author), Reay, David (author), Santos, Rafael M. (author), Smith-Schoettker, Ashley (author), Stankiewicz, A.I. (author), van den Berg, Henk (author), van Gerven, Tom (author), van Gestel, Jeroen (author), van der Stelt, Michiel (author), van de Ven, Mark (author), Weber, R. S. (author)
Achieving the United Nations sustainable development goals requires industry and society to develop tools and processes that work at all scales, enabling goods delivery, services, and technology to large conglomerates and remote regions. Process Intensification (PI) is a technological advance that promises to deliver means to reach these...
journal article 2020
document
Chaves Figueiredo, S. (author), Romero Rodriguez, C. (author), Ahmed, Zeeshan Y. (author), Bos, Derk H. (author), Xu, Y. (author), Salet, Theo M. (author), Copuroglu, Oguzhan (author), Schlangen, E. (author), Bos, Freek P. (author)
Extrusion based additive manufacturing of cementitious materials has demonstrated strong potential to become widely used in the construction industry. However, the use of this technique in practice is conditioned by a feasible solution to implement reinforcement in such automated process. One of the most successful ductile materials in civil...
journal article 2020
document
Figueiredo, Stefan C. (author), van Overmeir, A.L. (author), Nefs, Karsten (author), Schlangen, E. (author), Salet, Theo A. M. (author), Šavija, B. (author), Suiker, Akke S. J. (author), Bos, Freek P. (author)
Over the past few years, several studies have shown the potential of three-dimensional concrete printing (3DCP) for applications in building and civil engineering. However, only a few studies have compared the properties of the fresh printing material and the quality of the printed elements from different printing facilities. Variations in the...
conference paper 2020
document
Bos, R.A. (author)
Orthoses have evolved from simply maintaining bone fractures and correcting spinal deformities to full mechatronic systems that can read a person’s intention and translate that into a desired motion or force path. A vast variety in pathologies (e.g., stroke, muscular dystrophies), applications (e.g., daily assistance, research) and environments ...
doctoral thesis 2019
document
Bos, Freek (author), Ahmed, Zeeshan Y. (author), Romero Rodriguez, C. (author), Chaves Figueiredo, S. (author)
Recent years have seen a rapid growth of additive manufacturing methods for concrete construction. Potential advantages include reduced material use and cost, reduced labor, mass customization and CO2 footprint reduction. None of these methods, however, has yet been able to produce additively manufactured concrete with material properties...
journal article 2019
document
Salazar Castillo, R.O. (author), Ter Haar, Sterre F. (author), Ponners, Christopher G. (author), Bos, Martijn (author), Rossen, W.R. (author)
Foam can improve sweep efficiency in gas-injection-enhanced oil recovery. Surfactant-alternating-gas (SAG) is a favored method of foam injection. Laboratory data indicate that foam can be non-Newtonian at low water fractional flow f<sub>w</sub>, and therefore during gas injection in a SAG process. We investigate the implications of this...
journal article 2019
document
Stevens, L.L. (author), de Vries, M.J. (author), Bos, Mark M.J.W. (author), Kopnina, Helen (author)
The emerging field of biomimicry and learning to design with and for nature has expanded in recent years through a diversity of educational programs. Inspiration following natural forms may give the appearance of being sustainable, but the question remains, how sustainable is it? Misunderstanding the function of these forms may leave...
journal article 2019
document
Bos, R.A. (author), Plettenburg, D.H. (author), Herder, J.L. (author)
While designing a dynamic hand orthosis to assist during activities of daily living, the designer has to know whether a concept will have sufficient grasp performance to support these activities. This is often estimated by measuring the interaction force at the contact interface. However, this requires a prototyping step and limits the...
journal article 2019
document
Chaves Figueiredo, S. (author), Romero Rodriguez, C. (author), Ahmed, Zeeshan Y. (author), Bos, D. H. (author), Xu, Y. (author), Salet, Theo M. (author), Copuroglu, Oguzhan (author), Schlangen, E. (author), Bos, Freek P. (author)
New additive manufacturing methods for cementitious materials hold a high potential to increase automation in the construction industry. However, these methods require new materials to be developed that meet performance requirements related to specific characteristics of the manufacturing process. The appropriate characterization methods of...
journal article 2019
document
Zonneveld, Hazel I. (author), Pruim, R.H.R. (author), Bos, Daniel (author), Vrooman, Henri A. (author), Muetzel, Ryan L. (author), Hofman, Albert (author), Rombouts, Serge ARB (author), van der Lugt, Aad (author), Niessen, W.J. (author)
Structural brain markers are studied extensively in the field of neurodegeneration, but are thought to occur rather late in the process. Functional measures such as functional connectivity are gaining interest as potentially more subtle markers of neurodegeneration. However, brain structure and function are also affected by ‘normal’ brain...
journal article 2019
document
Borg Costanzi, C. (author), Ahmed, Z. Y. (author), Schipper, H.R. (author), Bos, F. (author), Knaack, U. (author), Wolfs, R.J.H. (author)
One of the geometrical restrictions associated with printed paste materials such as concrete, is that material must be self-supporting during printing. In this research paper a new methodology for 3D Printing Concrete onto a temporary freeform surface is presented. This is achieved by setting up a workflow for combining a Flexible Mould...
journal article 2018
document
Khalilnezhad, H. (author), Popov, M. (author), van der Sluis, L. (author), Bos, Jorrit A. (author), Ametani, Akihiro (author)
Energization overvoltages are among the severest overvoltages stressing insulations of EHV power system components. Since these overvoltages have a statistical nature, the insulation level should be determined with the use of a statistical approach by which the distribution of overvoltages is calculated. Literature has properly studied the...
journal article 2018
document
Khalilnezhad, H. (author), Popov, M. (author), Bos, Jorrit A. (author), de Jong, JPW (author), van der Sluis, L. (author)
Switching operations in power systems can produce significant overvoltages under specific circumstances. With the increasing application of underground cables in transmission systems, the statistical distribution of energization overvoltages is expected to change substantially due to the different electrical characteristics of cables and OHLs....
conference paper 2018
Searched for: +
(41 - 60 of 248)

Pages