Searched for: +
(61 - 80 of 1,544)

Pages

document
Ren, S. (author), Liu, X. (author), Erkens, S. (author)
The low-temperature relaxation and fatigue cracking performance are two essential aspects in estimating the rejuvenation efficiency of recycling agents (RAs). This study aims to fundamentally investigate the effects of recycling agent type/dosage and aging degree of bitumen on thermodynamic and rheological properties of rejuvenated bitumen at...
journal article 2024
document
Liu, Hanqing (author)
This thesis provides a comprehensive research of both the mechanics and thermodynamics of suspended two-dimensional (2D) membranes, such as tunable mechanical resonance, membrane deformation, heat transport, phonon scattering, and energy dissipation. These characteristics make nanomechanical resonators, made of a suspended 2D membrane, promising...
doctoral thesis 2023
document
Liu, Tao (author), Ji, Wen (author), Gkiotsalitis, Konstantinos (author), Cats, O. (author)
Transfer optimization in public transport (PT) networks can be achieved through coordinated timetabling and vehicle scheduling. Traditionally, the coordinated timetabling problem is solved first before proceeding to the vehicle scheduling problem. The integration of these two problems can help further reduce the total operation cost and...
journal article 2023
document
Liu, Z. (author)
Garments, one of the human basic needs, were customized and handmade before the Industrial Revolution. After the realization of mass production, the cost of a piece of clothing became lower, but some disadvantages arose. Garments were no longer made to measure and overproduction caused environmental problems. The new developments in digital...
doctoral thesis 2023
document
Liu, X. (author)
doctoral thesis 2023
document
Yang, Zhe (author), Liu, Zhou (author), Zhang, Qi (author), Chen, Zhe (author), de Jesus Chavez, Jose (author), Popov, M. (author)
The traditional fault control strategy of converter-interfaced renewable energy sources (CIRESs) may bring about a lower sensitivity level or misoperation of fault component-based directional elements. To overcome this problem, a new control scheme is proposed to adjust sequence impedance angles of CIRESs by computing suitable current...
journal article 2023
document
Liu, Chi (author), Gonçalves, Joana (author), Quist, W.J. (author)
This paper explores the opportunities for locals’ participation as a tool for the sustainable redevelopment of vacant heritage. It focuses on the Politiebureau Groningen Centrum (The Netherlands) as a case study to apply a novel approach to engage community participation in architectural redesign. It fills the academic gap on participation in...
journal article 2023
document
Zhang, C. (author), Liu, Z. (author), Li, Chun (author), Buijnsters, J.G. (author)
Diamond nanostructures are mostly produced from bulk diamond (single- or polycrystalline) by using time-consuming and/or costly subtractive manufacturing methods. In this study, we report the bottom-up synthesis of ordered diamond nanopillar arrays by using porous anodic aluminium oxide (AAO). Commercial ultrathin AAO membranes were adopted as...
journal article 2023
document
Bargerbos, A. (author), Splitthoff, L.J. (author), Pita-Vidal, Marta (author), Wesdorp, J.J. (author), Liu, Yu (author), Krogstrup, Peter (author), Kouwenhoven, Leo P. (author), Andersen, C.K. (author), Grünhaupt, L. (author)
Quantum error correction will be an essential ingredient in realizing fault-tolerant quantum computing. However, most correction schemes rely on the assumption that errors are sufficiently uncorrelated in space and time. In superconducting qubits, this assumption is drastically violated in the presence of ionizing radiation, which creates bursts...
journal article 2023
document
Liu, X. (author), Xiao, Yuchun (author), Jiang, Huihuang (author), Guo, Y. (author), Yu, Mengwen (author), Tan, Wanzhong (author)
This study presents the analogical assessment of the train-induced vibration and radiated noise in a proposed theater. The theater is to be constructed in a region with crowded metro lines, and the assessment is implemented in an analogical building with comparable structural type and metro condition. Prior to the assessment, the comparability...
journal article 2023
document
Liu, Y. (author), Pan, W. (author)
Machine learning can be effectively applied in control loops to make optimal control decisions robustly. There is increasing interest in using spiking neural networks (SNNs) as the apparatus for machine learning in control engineering because SNNs can potentially offer high energy efficiency, and new SNN-enabling neuromorphic hardware is being...
journal article 2023
document
Faucon, L.E.K. (author), Boot, T. (author), Riemslag, A.C. (author), Scott, S.P. (author), Liu, Ping (author), Popovich, V. (author)
In this work, the hydrogen fatigue of pipeline steel X60, its girth welds and weld defects were investigated through in situ fatigue testing. A novel in situ gaseous hydrogen charging fatigue set-up was developed, which involves a sample geometry that mimics a small-scale pipeline with high internal hydrogen gas pressure. The effect of hydrogen...
journal article 2023
document
Fang, B. (author), Moultos, O. (author), Lü, Tao (author), Sun, Jiaxin (author), Liu, Z. (author), Ning, Fulong (author), Vlugt, T.J.H. (author)
Hydrate dissociation is often accompanied by the formation of nanobubbles. Knowledge of the effects of nanobubbles on hydrate dissociation is essential for understanding the dynamic behavior of the hydrate phase change and improving the gas production efficiency. Here, molecular dynamics simulations were performed to study the methane hydrate...
journal article 2023
document
Wang, Jinpeng (author), Zhang, Shang (author), Fenn, Peter (author), Luo, Xiaowei (author), Liu, Y. (author), Zhao, Lilin (author)
Previous studies revealed that Building Information Modeling (BIM) has the potential to reduce project uncertainties, design errors, change orders, and delays, which might facilitate achieving effective dispute management in the construction industry. However, research into the adoption of BIM to holistically enhance effective dispute...
review 2023
document
Munir, Yasir (author), Crosato, A. (author), Bregolia, Francesco (author), Paudel, Sandesh (author), Liu, J. (author)
abstract 2023
document
Liu, J. (author), Crosato, A. (author), Bregolia, Francesco (author), Calvani, Giulio (author)
poster 2023
document
Geng, S. (author), Yang, M. (author), Mitici, Mihaela (author), Liu, Sifeng (author)
System resilience characterizes the capability of maintaining the required functionality under disruptions, which is of great significance in evaluating the productivity and safety of complex engineered systems. Although most studies conduct resilience assessment from qualitative and quantitative perspectives, system functionality that reflects...
journal article 2023
document
Du, Guodong (author), Zou, Yuan (author), Zhang, Xudong (author), Li, Z. (author), Liu, Qi (author)
The autonomous vehicle is widely applied in various ground operations, in which motion planning and tracking control are becoming the key technologies to achieve autonomous driving. In order to further improve the performance of motion planning and tracking control, an efficient hierarchical framework containing motion planning and tracking...
journal article 2023
document
Lin, P. (author), Liu, X. (author), Erkens, S. (author), Welvaarts, Bart (author), Brouns, Koen (author)
Cold in-place recycling is gaining more attention worldwide because of its lower energy consumption, while the normally used asphalt emulsion and foamed asphalt cannot meet this requirement of short traffic disturbance and road performance of the surface layer. In this research, a polyurethane-modified cold binder (PMCB) was designed and...
journal article 2023
document
Cheng, Xiaoyang (author), Ibraim, Erdin (author), Liu, Haoyuan (author), Pisano, F. (author), Diambra, Andrea (author)
This paper uses 3D numerical analyses to investigate the stress path experienced by soil elements around large diameter piles in sand subjected to monotonic drained lateral loading. Inspection of the loading-induced stresses in the soil revealed the multiaxial nature of these stress paths, which are characterised by rotation of one or more...
journal article 2023
Searched for: +
(61 - 80 of 1,544)

Pages