Searched for:
(61 - 80 of 788)

Pages

document
Wang, Z. (author), Pashaei Kamali, F. (author), Osseweijer, P. (author), Posada Duque, J.A. (author)
Derived from renewable feedstocks, aviation biofuel is generally perceived as inherently sustainable. However, its production involves a wide range of sectors and interacts with different actors in society. It is therefore important to understand and evaluate not only the environmental impacts of that process, but also its socioeconomic...
journal article 2019
document
Wang, Yuanqing (author), Ubachs, Wim (author), van de Water, W. (author)
were measured at pressures ranging from 0.5 to 4 bars and temperatures from 257 to 355 K using green laser light (wavelength 532 nm, scattering angle of 55.7°). These spectra were compared to two line shape models, which take the bulk viscosity as a parameter. One model applies to the...
journal article 2019
document
Shan, M. (author), Liu, X. (author), Wang, X. (author), Liu, Z. (author), Ganapathy, S. (author), Gascon Sabate, J. (author), Kapteijn, F. (author)
capture. Polybenzimidazole (PBI) is one of the leading membrane materials for this separation. In this study, we present superior novel supported PBI (poly(p-phenylene benzobisimidazole), PBDI)...
journal article 2019
document
Liu, M. (author), Wang, M. (author), Hoogendoorn, S.P. (author)
Cooperative (automated) vehicles have the potential to enhance traffic efficiency and fuel economy on urban roads, especially at signalized intersections. An optimal control approach to optimize the trajectories of cooperative vehicles at fixed-timing signalized intersections along an arterial is presented. The proposed approach aims to...
journal article 2019
document
Ao, Y. (author), Wang, J. (author), Zhou, M. (author), Lindenbergh, R.C. (author), Yang, M. Y. (author)
Panoramic images are widely used in many scenes, especially in virtual reality and street view capture. However, they are new for street furniture identification which is usually based on mobile laser scanning point cloud data or conventional 2D images. This study proposes to perform semantic segmentation on panoramic images and transformed...
journal article 2019
document
Wang, Zhaojun (author), Tian, B. (author), Boom, Remko (author), van der Goot, Atze Jan (author)
Dense calcium caseinate dispersions can be transformed into hierarchically fibrous structures by shear deformation. This transformation can be attributed to the intrinsic properties of calcium caseinate. Depending on the dispersion preparation method, a certain amount of air gets entrapped in the sheared protein matrix. Although anisotropy is...
journal article 2019
document
Liu, M. (author), Cheng, Z. (author), Qian, K. (author), Verhallen, T.W. (author), Wang, C. (author), Wagemaker, M. (author)
The development of safe and high-performance Li-metal anodes is crucial to meet the demanded increase in energy density of batteries. However, severe reactivity of Li metal with typical electrolytes and dendrite formation leads to a poor cycle life and safety concerns. Therefore, it is essential to develop electrolytes that passivate the...
journal article 2019
document
Tao, Jianfeng (author), Wang, Zhengbing (author), Zhou, Zeng (author), Xu, Fan (author), Zhang, Changkuan (author), Stive, M.J.F. (author)
The radial sand ridges (denoted as “RSRs” hereafter) in the Southern Yellow Sea, China, are morphologically striking because of the remarkable size and radial planar orientation, standing out as a unique coastal geomorphology among the worldwide sand ridge systems. The formation of this giant fan‐shaped geomorphic feature requires delicate...
journal article 2019
document
Wang, Zhengbing (author), Vandenbruwaene, Wouter (author), Taal, Marcel (author), Winterwerp, J.C. (author)
The records ofHWand LWin the most upper part of the Scheldt Estuary since 1971 have been analysed together with the daily river discharge. The tidal range, the hydraulic head and the ratio between the rising tide period to falling tide period have been determined for investigating the tidal amplification, the water surface slope along the river...
journal article 2019
document
Shan, Xinmeng (author), Wen, Jiahong (author), Zhang, Min (author), Wang, Luyang (author), Ke, Q. (author), Li, Weijiang (author), Du, Shiqiang (author), Shi, Yong (author), Chen, Kun (author), More Authors (author)
Extreme flooding usually causes huge losses of residential buildings and household properties, which is critical to flood risk analysis and flood resilience building in Shanghai. We developed a scenario-based multidisciplinary approach to analyze the exposure, losses and risks of residential buildings and household properties, and their...
journal article 2019
document
Qu, Bingyan (author), Zhou, Rulong (author), Wang, L. (author), Dorenbos, P. (author)
level locations of the TM...
journal article 2019
document
Qu, C. (author), Zhan, X. (author), Wang, Guanghui (author), Wu, Jianliang (author), Zhang, Zi-Ke (author)
Many systems are dynamic and time-varying in the real world. Discovering the vital nodes in temporal networks is more challenging than that in static networks. In this study, we proposed a temporal information gathering (TIG) process for temporal networks. The TIG-process, as a node's importance metric, can be used to do the node ranking. As...
journal article 2019
document
Wang, Ying (author), Gao, Yuan (author), Yu, Xiaoyuan (author), Hansen, I.A. (author), Miao, Jianrui (author)
Train unit routing problem determines the number of train units needed to carry out involved trips, which is a significant part of railway operation cost. In this paper, we focus on high-speed train unit routing problems, in which maintenance resource constraints both on time and distance are taken into account. Based on a connection network,...
journal article 2019
document
Kuipers, T. (author), Wu, J. (author), Wang, C.C. (author)
The fabrication flexibility of 3D printing has sparked a lot of interest in designing structures with spatially graded material properties. In this paper, we propose a new type of density graded structure that is particularly designed for 3D printing systems based on filament extrusion. In order to ensure high-quality fabrication results,...
journal article 2019
document
Wang, H. (author), Zhang, Yue (author), Zhang, Yi (author), Feng, Shuyin (author), Lu, Guoyang (author), Cao, Lintao (author)
Microwave heating is an encouraging heating technology for the maintenance, recycling, and deicing of asphalt pavement. To investigate the microwave heating properties of asphalt mixture, laboratory tests and numerical simulations were done and compared. Two types of Stone Mastic Asphalt (SMA) mixture samples (with basalt aggregates and steel...
journal article 2019
document
Wang, M. (author), He, Lijuan (author), Infante Ferreira, C.A. (author)
/ILs) in absorption cycles, while heat and mass transfer of these new fluids in components have been rarely reported. In this study, a corrugated plate heat exchanger is selected as the...
journal article 2019
document
Bai, Ying (author), Ruan, Xiaohong (author), Wang, F. (author), Garnier, Antoine (author), van der Hoek, J.P. (author)
Riverbank filtration (RBF) as a barrier of pathogenic microorganisms and organic micropollutants recently has been proven capable of removing sulfonamides. However, the study about the effect of redox conditions on biodegradation of common and persistent sulfonamides in RBF is limited and the response of microbial communities to sulfonamides...
journal article 2019
document
Zhang, Tianyu (author), Ma, Yunjian (author), Tan, Chin Ping (author), Hollmann, F. (author), Wang, Jianrong (author), Yang, Bo (author), Wang, Yonghua (author)
was...
journal article 2019
document
Liu, Y. (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, G.Q. (author), Sun, Fenglian (author)
Purpose: Crack and stress distribution on dies are key issues for the pressure-assisted sintering bonding of power modules. The purpose of this research is to build a relationship among stress distributions, sintering sequences and sintering pressures during the sintering processes. Design/methodology/approach: Three sintering sequences, S(a)...
journal article 2019
document
Wang, X. (author), van Kampen, E. (author), Chu, Q. P. (author), Lu, Peng (author)
As a sensor-based control method, incremental nonlinear dynamic inversion (INDI) has been applied to various aerospace systems and has shown desirable robust performance against aerodynamic model uncertainties. However, its previous derivation based on the time scale separation principle has some limitations. There is also a need for stability...
journal article 2019
Searched for:
(61 - 80 of 788)

Pages