Searched for:
(61 - 80 of 601)

Pages

document
Mehta, D. (author), Zhang, Y. (author), van Zuijlen, A.H. (author), Bijl, H. (author)
Despite advances in turbulence modelling, the Smagorinsky model remains a popular choice for large eddy simulation (LES) due to its simplicity and ease of use. The dissipation in turbulence energy that the model introduces, is proportional to the Smagorinsky constant, of which many different values have been proposed. These values have been...
journal article 2019
document
Li, Y. (author), Lietaert, Karel (author), Li, W. (author), Zhang, X.Y. (author), Leeflang, M.A. (author), Zhou, J. (author), Zadpoor, A.A. (author)
The corrosion fatigue behavior of additively manufactured topologically ordered porous iron based on diamond unit cells was studied for the first time to understand its response to cyclic loading in a simulated physiological environment. The material exhibited high fatigue resistance with fatigue strengths being 70% and 65% of yield stress in...
journal article 2019
document
Zhang, D. (author), Ortiz Sanchez, M.A. (author), Bluijssen, P.M. (author)
Background: It is well-known that indoor environmental quality (IEQ) in classrooms can have an effect on school children's comfort, health and performance. Unfortunately, information about the school children's perception of IEQ factors in their classrooms is still insufficient. The objective of this study was to better understand school...
journal article 2019
document
Gacs, Jenő (author), Zhang, W. (author), Knaus, Tanja (author), Mutti, Francesco G. (author), Arends, I.W.C.E. (author), Hollmann, F. (author)
The consecutive photooxidation and reductive amination of various alcohols in a cascade reaction were realized by the combination of a photocatalyst and several enzymes. Whereas the photocatalyst (sodium anthraquinone-2-sulfonate) mediated the light-driven, aerobic oxidation of primary and secondary alcohols, the enzymes (various ω...
journal article 2019
document
Gao, Yuan (author), Qiao, Tiezhu (author), Zhang, Haitao (author), Yang, Yi (author), Pang, Y. (author), Wei, Hongyan (author)
During the operation of the belt conveyor, measuring speed of the belt conveyor is vital to the safe and efficient operation. In the existing measuring speed system, the measurement instrument is required contacting with the surface of the belt. The contact measurement method cannot avoid the occurrence of measuring error caused by slipping...
journal article 2019
document
Cai, Miao (author), Liang, Yonghu (author), Yun, Minghui (author), Chen, Xuan You (author), Yan, Haidong (author), Yu, Zhaozhe (author), Yang, Daoguo (author), Zhang, G.Q. (author)
A novel silicone rubber elastic key (SREK) is proposed in this paper for surface mounting technology (SMT) applications. Effects of thermal reflowing stress on the mechanical properties of SMT-SREKs are investigated. The manufactured SMT-SREKs, which underwent various reflowing conditions in advance, are subjected to pressing force and...
journal article 2019
document
Zhang, J. (author), Koutrouvelis, A. (author), Heusdens, R. (author), Hendriks, R.C. (author)
In this letter, we propose a decentralized framework for rate-distributed linearly constrained minimum variance (LCMV) beamforming in wireless acoustic sensor networks. To save the energy usage within the network, we propose to minimize the transmission cost and put a constraint on the noise reduction performance. Subsequently, we...
journal article 2019
document
Zhang, D. (author), Tenpierik, M.J. (author), Bluijssen, P.M. (author)
The acoustic conditions of classrooms received a lot of attention in the last decades because of its important role in school children's comfort and performance. In a previous field study of 54 classrooms from 21 schools in the Netherlands, more than 85% of the 1145 primary school children reported that they were bothered by noise in the...
journal article 2019
document
Zhang, W. (author), Askarinejad, A. (author)
Sand erosion and scouring caused by waves and marine currents result in gradual increase of local seabed inclination and formation of slopes around hydraulic structures and offshore foundations. During this process, shear stresses in the soil body increase monotonically which may lead to static liquefaction and damage of the adjacent offshore...
journal article 2019
document
Zhang, Chunyan (author), Liu, B. (author), Yu, Baoxing (author), Lu, Xiaopeng (author), Wei, Yong (author), Zhang, Tao (author), Mol, J.M.C. (author), Wang, Fuhui (author)
Surface pretreatment is generally applied before application of protective coatings on Mg alloys, which influences surface microstructure and electrochemical activity of the substrate and has an effect on the coating properties. The effect of various pretreatment processes (sand-blasting, grinding and polishing) on the microstructure and...
journal article 2019
document
Zhang, Youyou (author), Mosallam, Ayman (author), Liu, Yuqing (author), Sun, Yun (author), Xin, H. (author), He, Jun (author)
In this study, flexural behaviors of the pultruded composite laminate were evaluated through experiments and theoretical analysis. Three-point flexural tests were performed for pultruded specimens. The typical failure mode for the longitudinal flexural specimens was local crush on the top surface accompanied with local cracks on the bottom...
journal article 2019
document
Ramachandrappa Venkatesh, M. (author), Sachdeva, S. (author), Wei, J. (author), Bossche, A. (author), Bosma, D. (author), de Smet, L.C.P.M. (author), Sudholter, Ernst J. R. (author), Zhang, G.Q. (author)
Capacitors made of interdigitated electrodes (IDEs) as a transducer platform for the sensing of volatile organic compounds (VOCs) have advantages due to their lower power operation and fabrication using standard micro-fabrication techniques. Integrating a micro-electromechanical system (MEMS), such as a microhotplate with IDE capacitor,...
journal article 2019
document
Han, J. (author), Chepuri, S.P. (author), Zhang, Qunfei (author), Leus, G.J.T. (author)
Orthogonal signal-division multiplexing (OSDM) is a promising modulation scheme that provides a generalized framework to unify orthogonal frequency-division multiplexing (OFDM) and single-carrier frequency-domain equalization. By partitioning each data block into vectors, it allows for a flexible configuration to trade off resource management...
journal article 2019
document
Rassam, F. (author), Zhang, T. (author), Cieslak, Kasia P. (author), Lavini, Cristina (author), Stoker, Jaap (author), Bennink, R. J. (author), Van Gulik, Thomas (author), van Vliet, L.J. (author), Runge, Jurgen H. (author), Vos, F.M. (author)
Tc-mebrofenin hepatobiliary scintigraphy (HBS) as quantitative liver function tests for the preoperative assessment of patients undergoing liver resection. Methods: Patients undergoing liver surgery and preoperative assessment...
journal article 2019
document
Dadisman, Ryan (author), Shen, Jiazhou (author), Feng, Hao (author), Crow, Lowell (author), Jiang, Chenyang (author), Wang, Tianhao (author), Zhang, Yuxuan (author), Bilheux, Hassina (author), Parnell, S. (author), More Authors (author)
Several methods of polarized neutron scattering call for a zero magnetic field (ZF) region to reduce magnetic field integral aberrations while preserving the neutron polarization. Though the design for large angle neutron scattering has been presented in various places, the design characterization and tuning has not been discussed before. In...
journal article 2019
document
Zhang, Y. (author), Yang, B. (author), Yang, Zhengxian (author), Ye, G. (author)
Capturing the long-term performance of concrete must be underpinned by a detailed understanding of the pore structure. Mercury intrusion porosimetry (MIP) is a widely used technique for pore structure characterization. However, it has been proven inappropriate to measure the pore size distribution of cementitious materials due to the ink-bottle...
journal article 2019
document
Weppelman, I.G.C. (author), Moerland, R.J. (author), Zhang, L (author), Kruit, P. (author), Hoogenboom, J.P. (author)
Crucial for the field of ultrafast electron microscopy is the creation of sub-picosecond, high brightness electron pulses. The use of a blanker to chop the beam that originates from a high brightness Schottky source may provide an attractive alternative to direct pulsed laser illumination of the source. We have recently presented the concept...
journal article 2019
document
Liu, Q. (author), Zhao, M. (author), Mytnyk, S. (author), Klemm, B. (author), Zhang, K. (author), Wang, Y. (author), Yan, Dadong (author), Mendes, E. (author), van Esch, J.H. (author)
Hydrogel microparticles are important in materials engineering, but their applications remain limited owing to the difficulties associated with their manipulation. Herein, we report the self-orientation of crescent-shaped hydrogel microparticles and elucidate its mechanism. Additionally, the microparticles were used, for the first time, as...
journal article 2019
document
Hou, Chengcheng (author), Qiao, Tiezhu (author), Zhang, Haitao (author), Pang, Y. (author), Xiong, Xiaoyan (author)
As an important part of modern coal mine production, conveyor belts are widely used in the coal collection and transportation. In order to ensure the safe operation of the coal mine conveyor belt and solve the drawbacks of the existing conveyor belt longitudinal tear detection technology, a multispectral visual detection method for conveyor...
journal article 2019
document
Zhang, F. (author), de Ridder, H. (author), Barla, Pascal (author), Pont, S.C. (author)
Photographers and lighting designers set up lighting environments that best depict objects and human figures to convey key aspects of the visual appearance of various materials, following rules drawn from experience. Understanding which lighting environment is best adapted to convey which key aspects of materials is an important question in...
journal article 2019
Searched for:
(61 - 80 of 601)

Pages