Searched for:
(81 - 100 of 282)

Pages

document
Zhou, Yatong (author), Li, Shuhua (author), Zhang, D. (author), Chen, Yangkang (author)
We propose a new low-rank based noise attenuation method using an efficient algorithm for tracking subspaces from highly corrupted seismic observations. The subspace tracking algorithm requires only basic linear algebraic manipulations. The algorithm is derived by analysing incremental gradient descent on the Grassmannian manifold of...
journal article 2018
document
Li, Z. (author), Ganapathy, S. (author), Xu, Y. (author), Zhu, Quanyao (author), Chen, Wen (author), Kochetkov, Ivan (author), George, C. (author), Nazar, Linda F. (author), Wagemaker, M. (author)
journal article 2018
document
Szécsényi, A. (author), Li, G. (author), Gascon, Jorge (author), Pidko, E.A. (author)
Reaction paths underlying the catalytic oxidation of methane with H<sub>2</sub>O<sub>2</sub> over an Fe containing MIL-53(Al) metal-organic framework were studied by periodic DFT calculations. Not only the activation of methane, but the full reaction network was considered, which includes the formation of the active site, the overoxidation of...
journal article 2018
document
Liu, Jikai (author), Gaynor, Andrew T. (author), Chen, Shikui (author), Kang, Zhan (author), Suresh, Krishnan (author), Takezawa, Akihiro (author), Li, Lei (author), Kato, Junji (author), Tang, Jinyuan (author), Wang, C.C. (author), Cheng, Lin (author), Liang, Xuan (author), To, Albert. C. (author)
Manufacturing-oriented topology optimization has been extensively studied the past two decades, in particular for the conventional manufacturing methods, for example, machining and injection molding or casting. Both design and manufacturing engineers have benefited from these efforts because of the close-to-optimal and friendly-to-manufacture...
journal article 2018
document
Li, Jun (author), Che, Fanglin (author), Pang, Yuanjie (author), Zou, Chengqin (author), Howe, Jane Y. (author), Burdyny, T.E. (author), Edwards, Jonathan P. (author), Wang, Yuhang (author), Li, Fengwang (author), Wang, Ziyun (author)
The electrochemical reduction of carbon monoxide is a promising approach for the renewable production of carbon-based fuels and chemicals. Copper shows activity toward multi-carbon products from CO reduction, with reaction selectivity favoring two-carbon products; however, efficient conversion of CO to higher carbon products such as n...
journal article 2018
document
Sung, Shijun (author), Dabironezare, S.O. (author), Llombart Juan, N. (author), Selvin, Skyler (author), Bajwa, Neha (author), Chantra, Somporn (author), Nowroozi, Bryan (author), Garritano, James (author), Goell, Jacob (author), Li, Alex (author), Deng, S.X. (author), Brown, Elliott (author), Grundfest, Warren S. (author), Taylor, Zachary D. (author)
Reflection-mode terahertz (THz) imaging of corneal tissue water content (CTWC) is a proposed method for early accurate detection and study of corneal diseases. Despite promising results from ex vivo and in vivo cornea studies, interpretation of the reflectivity data is confounded by the contact between corneal tissue and dielectric windows used...
journal article 2018
document
Xiahou, Xiaer (author), Yuan, Jingfeng (author), Liu, Y. (author), Tang, Yuchun (author), Li, Qiming (author)
Construction industrialization (CI) has been adopted worldwide because of its potential benefits. However, current research shows the incentives for adopting CI may differ in different regions. While the promotion of CI in China is still at the initial stage, a systematical analysis of the driving factors would help decision makers get a...
journal article 2018
document
Li, Bin (author), Jiang, Peng (author), Zhai, Famin (author), Chen, Junhong (author), Bei, G. (author), Hou, Xinmei (author), Chou, Kuo Chih (author)
In this paper, the fabrication and thermal conductivity (TC) of water-based nanofluids using boron (B)-doped SiC as dispersions are reported. Doping B into the <i>β</i>-SiC phase leads to the shrinkage of the SiC lattice due to the substitution of Si atoms (0.134 nm radius) by smaller B atoms (0.095 nm radius). The presence of B in the SiC...
journal article 2018
document
Yang, Z. (author), Boogaard, M.A. (author), Chen, Rong (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
This paper presents an analysis of the transient contact solutions of wheel-rail frictional rolling impacts calculated by an explicit finite element model of the wheel-insulated rail joint (IRJ) dynamic interaction. The ability of the model to simulate the dynamic behavior of an IRJ has been validated against a comprehensive field measurement in...
journal article 2018
document
Yang, Z. (author), Boogaard, M.A. (author), Wei, Z. (author), Liu, Jinzhao (author), Dollevoet, R.P.B.J. (author), Li, Z. (author)
This paper presents an analysis of the transient contact solutions of wheel-rail frictional rolling impacts calculated by an explicit finite element model of the wheel-insulated rail joint (IRJ) dynamic interaction. The ability of the model to simulate the dynamic behavior of an IRJ has been validated against a comprehensive field measurement in...
journal article 2018
document
Li, R. (author), Yu, Qian (author), Wang, Yunwei (author), Wang, Z.B. (author), Gao, Shu (author), Flemming, Burg (author)
The above-ground biomass of Spartina alterniflora salt marsh meadows is influenced by numerous interacting factors, among them elevation, tidal range and inundation duration. Bio-geomorphological models make use of either linear or quadratic equations, but it is important to be aware that the variables are area specific and hence not generic. In...
journal article 2018
document
Li, Guangliang (author), Whiteson, Shimon (author), Bradley Knox, W (author), Hung, H.S. (author)
Learning from rewards generated by a human trainer observing an agent in action has been proven to be a powerful method for teaching autonomous agents to perform challenging tasks, especially for those non-technical users. Since the efficacy of this approach depends critically on the reward the trainer provides, we consider how the...
journal article 2018
document
Cao, Pinqiang (author), Wu, Jianyang (author), Zhang, Zhisen (author), Fang, Bin (author), Peng, Li (author), Li, Tianshu (author), Vlugt, T.J.H. (author), Ning, Fulong (author)
A sound knowledge of fundamental mechanical properties of water ice is of crucial importance to address a wide range of applications in earth science, engineering, as well as ice sculpture and winter sports, such as ice skating, ice fishing, ice climbing, bobsleighs, and so on. Here, we report large-scale molecular dynamics (MD) simulations...
journal article 2018
document
Lv, Shasha (author), Verhallen, T.W. (author), Vasileiadis, A. (author), Ooms, F.G.B. (author), Xu, Y. (author), Li, Z. (author), Li, Zhengcao (author), Wagemaker, M. (author)
Electrical mobility demands an increase of battery energy density beyond current lithium-ion technology. A crucial bottleneck is the development of safe and reversible lithium-metal anodes, which is challenged by short circuits caused by lithium-metal dendrites and a short cycle life owing to the reactivity with electrolytes. The evolution of...
journal article 2018
document
Li, Shengli (author), Liu, Y. (author), Zhang, H. (author), Cai, Hongming (author), Sun, Fenglian (author), Zhang, G.Q. (author)
In this study, SAC305 and SAC305-0.3Ni solder balls were soldered onto Cu, high temperature treated Cu (H-Cu) and graphene coated Cu (G-Cu) substrates, respectively. The microstructure, the interfacial reaction, and the hardness of the solder joints were investigated. The interfacial intermetallic compound (IMC) is Cu<sub>6</sub>Sn<sub>5</sub...
journal article 2018
document
Kuai, Moshen (author), Cheng, Gang (author), Pang, Y. (author), Li, Yong (author)
For planetary gear has the characteristics of small volume, light weight and large transmission ratio, it is widely used in high speed and high power mechanical system. Poor working conditions result in frequent failures of planetary gear. A method is proposed for diagnosing faults in planetary gear based on permutation entropy of Complete...
journal article 2018
document
Jamshidi, A. (author), Hajizadeh, S. (author), Su, Z. (author), Naeimi, M. (author), Nunez Vicencio, A.A. (author), Dollevoet, R.P.B.J. (author), De Schutter, B.H.K. (author), Li, Z. (author)
In this paper, a decision support approach is proposed for condition-based maintenance of rails relying on expert-based systems. The methodology takes into account both the actual conditions of the rails (using axle box acceleration measurements and rail video images) and the prior knowledge of the railway track. The approach provides an...
journal article 2018
document
Li, G. (author), Pidko, E.A. (author)
Zeolites have a broad spectrum of applications as robust microporous catalysts for various chemical transformations. The reactivity of zeolite catalysts can be tailored by introducing heteroatoms either into the framework or at the extraframework positions that gives rise to the formation of versatile Brønsted acid, Lewis acid and redox...
journal article 2018
document
Gao, Mingyuan (author), Li, Yunwu (author), Lu, Jun (author), Wang, Yifeng (author), Wang, Ping (author), Wang, L. (author)
The goal of this study is to develop a vibration-based electromagnetic energy harvesting prototype that provides power to rail-side monitoring equipment and sensors by collecting wheel-rail vibration energy when the train travels. This technology helps power rail–side equipment in off-grid and remote areas. This article introduces the...
journal article 2018
document
Li, Yonggang (author), Chen, Ziliang (author), Wen, Sheng (author), Hou, Xiaolin (author), Zhang, R. (author), Ma, Meihu (author)
A modified QuEChERS (quick, easy, cheap, effective, rugged, and safe) method and ultrahigh-performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS) were optimized and validated for 16 antibiotics belonging to three families (macrolides, quinolones, and sulfonamides) that were found in preserved eggs. Samples were...
journal article 2018
Searched for:
(81 - 100 of 282)

Pages