- document
-
Chen, X. (author), Sanchez, T. (author), Conciatori, D. (author), Chaouki, H. (author), Sorelli, L. (author), Selma, B. (author), Chekired, M. (author)This paper presents a new 2D water transport model considering capillary suction to predict the water content evolution in the concrete porosity. The basic formulations of the model are illustrated, and a switching algorithm is introduced to simulated wet-drying effects. Two specific absorption tests are studied to validate this model. The first...conference paper 2021
- document
-
Chen, X. (author), Hofland, B. (author), Altomare, C. (author), Uijttewaal, J.S.W. (author)In this paper the impact process and mechanism of overtopping flow on a vertical wall on a dike crest are investigated by means of a series of physical model tests. A double-peaked force was recognized in a time series of an overtoping flow. Four stages were summarized for the whole overtopping flow impact process. An empirical relationship...conference paper 2014
- document
- Chen, Jing (author) conference paper 2010
- document
-
Chen, Chen (author), Zheng, Qi (author), Jiang, Jinyang (author)In this paper, composite material C-S-H/PEG1000 was prepared by multi-scale porous material C-S-H as support and phase change material (PCM) PEG1000 by melt blending, so that it can reduce hydration heat of cementitious system utilizing the characteristics of releasing and storing energy of PCM. TEM, IR, DSC-Tg, BET, MIP and various other...conference paper 2021
- document
-
Han, Weiwei (author), Chen, Huisu (author), Zhang, Tao (author)Magnesium ammonium phosphate cement (MAPC) has been commonly applied in civil engineering. However, the analysis of hydration behavior and composition of solid assemblages still needs further exploration. From thermodynamic simulation, it is shown that the molar ratio between MgO and NH4H2PO4 (M/P ratio) determines the final composition of...conference paper 2021
- document
- Chen, Xiao Bo (author) conference paper 2006
- document
-
Chen, P.W. (author), Neuser, S. (author), Michaud, V. (author), Studart, A.R. (author)Abstract only.conference paper 2013
- document
-
Li, K. (author), Huang, R. (author), Phang, S.K. (author), Lai, S. (author), Wang, F. (author), Tan, P. (author), Chen, B.M. (author), Lee, T.H. (author)In this paper, we propose an approach to autonomously control a quadrotor micro aerial vehicle (MAV). With take-off weight of 50 g and 8-min flight endurance, the MAV platform codenamed KayLion developed by the National University of Singapore (NUS) is able to perform autonomous flight with pre-planned path tracking. The vision-based...conference paper 2014
- document
-
Zhang, C. (author), Deng, Z.C. (author), Zhang, Y.M. (author), Chen, C. (author)This paper develops an empirical model to predict the static yield stress of 3D printing mortar based on the flowability of paste and excess paste thickness. The components of the mortar are divided into paste and aggregate. The relation between the yield stress of mortar and the yield stress of paste and the excess paste thickness is...conference paper 2021
- document
- Chen, B.Y-H. (author), Peterson, F. (author), Valentine, D.T. (author) conference paper 1991
- document
-
Jonkheijm, L. (author), Chen, B. Y. (author), Schuurman, M.J. (author)With the rising number of Unmanned Aerial Systems (UAS) flying in the sky, an increase in collisions with manned aircraft seems inevitable. Since these devices are permitted to operate in airspace which they share with rotorcraft, a helicopter is certainly not retained from the risk of colliding with a UAS. The only prevailing impact related...conference paper 2022
- document
-
Qiu, Xiujiao (author), Chen, J. (author), Ye, G. (author), De Schutter, Geert (author)ASR (alkali-silica reaction) is one of the toughest durability problems in engineering. However, the damage induced by ASR is still fairly unpredictable due to the lack of microstructural information of cement-based materials affected by ASR, while the microstructure determines the global performance. In order to fill this gap, a multiscale...conference paper 2021
- document
-
Chen, Y. (author), Dolado, Jorge S. (author), Yin, Suhong (author), Yu, Qijun (author), Kostiuchenko, A. (author), Li, Z. (author), Ye, G. (author)The understanding of sodium aluminosilicate hydrate (N-A-S-H) gel is still limited due to its complex and amorphous structure. Recently, molecular dynamics simulation has provided a unique opportunity to better understand the structure of N-A-S-H gel from nanoscale. In this work, the N-A-S-H gel structure was obtained by simulating the...conference paper 2021
- document
-
Sun, Yubo (author), Chen, B. (author), Zhang, Shizhe (author), Blom, Kees (author), Lukovic, M. (author), Ye, G. (author)In recent years, the rapid industrialization and urbanization led to the explosive growth of municipal solid waste incineration (MSWI) bottom ashes (BA) production. However, most of them are directly landfilled, which not only brings environmental burden but also results in loss of potential resources. Present researches have proved that MSWI BA...conference paper 2021
- document
-
Chen, B. (author), Sun, Yubo (author), Jacquemin, Loic (author), Zhang, Shizhe (author), Blom, Kees (author), Lukovic, M. (author), Ye, G. (author)At present, most municipal solid waste incineration (MSWI) bottom ash, as being disposed of as waste, is directly landfilled, raising concern about the environmental issue and potential loss of resources. Given that the natural raw materials used for cement production are being depleted, the recycling of MSWI bottom ash for the application as...conference paper 2019
- document
-
Yan, Y. (author), Vreeburg, Wouter (author), Chen, Guangming (author), Schott, D.L. (author)Using bionic surface on the material equipment interface of bulk handling equipment is a promising solution for wear reduction. A bionic surface is a flat surface outfitted with a pattern of convexes that disrupt the natural sliding flow of bulk material. Previous numerical work has shown a significant reduction of wear of bionic surfaces...conference paper 2019
- document
-
Chen, Y. (author), Yalçinkaya, Ç. (author), Copuroglu, Oguzhan (author), Schlangen, E. (author)Recently, our group attempted to develop the ternary blended (Portland cement, calcined clay and limestone) cementitious material for 3D concrete printing (3DCP). Due to the elimination of formwork during the layer-by-layer casting process, the printed material should have favorable elastic properties and green strength at the fresh state. A...conference paper 2019
- document
-
Prabhu, Mihika (author), Errando-Herranz, Carlos (author), De Santis, L. (author), Christen, Ian (author), Chen, Changchen (author), Englund, Dirk (author)We demonstrate silicon color centers coupled to foundry-compatible silicon waveguides. We produced G-centers via carbon implantation in commercial silicon-on-insulator waveguides and measure through-waveguide single-photon emission in the telecommunications O-band.conference paper 2022
- document
-
Rocha, Isabelly (author), Felber, Pascal (author), Schiavoni, Valerio (author), Chen, Lydia Y. (author)Deep Neural Networks (DNNs) have demonstrated impressive performance on many machine-learning tasks such as image recognition and language modeling, and are becoming prevalent even on mobile platforms. Despite so, designing neural architectures still remains a manual, time-consuming process that requires profound domain knowledge. Recently,...conference paper 2022
- document
-
Cox, B.A. (author), Chen, Lydia Y. (author), Decouchant, Jérémie (author)Federated Learning (FL) is a popular deep learning approach that prevents centralizing large amounts of data, and instead relies on clients that update a global model using their local datasets. Classical FL algorithms use a central federator that, for each training round, waits for all clients to send their model updates before aggregating them...conference paper 2022