- document
-
Chen, B. (author), Perumal, Priyadharshini (author), Aghabeyk, F. (author), Adediran, Adeolu (author), Illikainen, Mirja (author), Ye, G. (author)The pursuit of low-carbon binders as alternatives to Portland cement has sparked interest in developing alkali-activated materials (AAM).<sup>1</sup> Using municipal solid waste incineration (MSWI) bottom ash as precursor for AAM has attracted increasing attention as it offers a sustainable, resource-efficient solution to mitigate the...review 2024
- document
-
Kumar Ashish, Prabin (author), Sreeram, Anand (author), Xu, Xiong (author), Chandrasekar, Pavan (author), Jagadeesh, A. (author), Adwani, Dheeraj (author), Kumar Padhan, Rabindra (author)The widespread production and consumption of plastics is a pressing global issue that requires multifaceted approaches and solutions. In terms of recycling, one of the ways to repurpose waste plastics in the construction industry would be to utilize them for asphalt pavement-related applications. Although this approach can potentially provide...review 2023
- document
-
Ikeda, Yuji (author), Grabowski, Blazej (author), Körmann, F.H.W. (author)Multicomponent alloys with multiple principal elements including high entropy alloys (HEAs) and compositionally complex alloys (CCAs) are attracting rapidly growing attention. The endless possibilities to explore new alloys and the hope for better combinations of materials properties have stimulated a remarkable number of research works in...review 2019
- document
-
Farooq, U. (author), Teuwen, Julie J.E. (author), Dransfeld, C.A. (author)Epoxy resins are widely used for different commercial applications, particularly in the aerospace industry as matrix carbon fibre reinforced polymers composite. This is due to their excellent properties, i.e., ease of processing, low cost, superior mechanical, thermal and electrical properties. However, a pure epoxy system possesses some...review 2020
- document
-
Chandra Paul, Suvash (author), Šavija, B. (author), Babafemi, Adewumi John (author)Disposal of consumer waste is a major challenge in urban areas around the world. In the field of building materials, it has long been recognized that many types of wastes can be used instead of raw materials. In addition, production of binders such as Portland cement is a CO<sub>2</sub> intensive process. However, for widespread use of wastes...review 2018
- document
-
Lantsoght, E.O.L. (author)Even though the structural behavior steel fiber reinforced concrete (SFRC) has been extensively researched, structural applications are still limited. One barrier to its implementation is the lack of mechanical models that describe the behaviour of SFRC members failing in shear. This paper reviews the effect of steel fibers on the different...review 2019
- document
-
Eivani, A.R. (author), Mehdizade, M. (author), Chabok, S. (author), Zhou, J. (author)Magnesium alloys have many unique properties, mostly benefitting from the low density of magnesium. However, they are not competitive, when compared with other lightweight materials, such as aluminum alloys, particularly in ductility and corrosion resistance. There is a strong need to improve the mechanical properties and corrosion resistance...journal article 2021
- document
-
Jiang, Nengdong (author), Ge, Zhi (author), Guan, Yanhua (author), Zuo, Zhiwu (author), Zhang, Hongzhi (author), Ling, Yifeng (author), Šavija, B. (author)This work presents a study of mechanical properties of foamed concrete at the meso-scale based on a combination of X-ray computed tomography (XCT) technique and a discrete lattice type fracture model. The microstructure of the foamed concrete with different densities was obtained by XCT technique and binarized as two-phase (pore/solid) materials...journal article 2022
- document
-
Zhang, Hongzhi (author), Yuan, Huaqiang (author), Ge, Zhi (author), Wu, Jiajie (author), Fang, Cheng (author), Schlangen, E. (author), Šavija, B. (author)Clay brick is one of the major components of demolition waste, which is generally landfilled. Effective and new uses of recycled clay brick may provide sustainability benefits in terms of landfill reduction. Therefore, this research aims at applying Recycled fine clay brick aggregates (RFCBA) with sizes from 0.075 mm–4.75 mm to prepare Self...journal article 2021
- document
-
Hedayati, R. (author), Ghavidelnia, Naeim (author), Sadighi, Mojtaba (author), Bodaghi, Mahdi (author)Permeable porous implants must satisfy several physical and biological requirements in order to be promising materials for orthopaedic application: they should have the proper levels of stiffness, permeability, and fatigue resistance approximately matching the corresponding levels in bone tissues. This can be achieved using designer materials...journal article 2021
- document
-
Orłowska, Marta (author), Pixner, Florian (author), Hütter, Andreas (author), Kooijman, A.M. (author), Jasiński, Cezary (author), Gonzalez Garcia, Y. (author), Enzinger, Norbert (author), Lewandowska, Małgorzata (author)The present study shows results of friction stir welded (FSW) samples after different plastic deformation routes. The welds were made of coarse-grained and ultrafine-grained commercially pure aluminium. As a plastic deformation method a new hybrid process has been chosen, which resulted in obtaining samples with different characteristics of...journal article 2021
- document
-
Lee, Gye Won (author), Kim, Tae Woo (author), Sloof, W.G. (author), Lee, Kee Sung (author)Repetitive heating and cooling cycles inevitably cause crack damage of hot gas components of gas turbine engines, such as blades and vanes. In this study the self-healing capacity is investigated of mullite + ytterbium monosilicate (Yb<sub>2</sub>SiO<sub>5</sub>) as EBC material with Ti<sub>2</sub>AlC MAX phase particles embedded as a crack...journal article 2021
- document
-
Rong, Jian (author), Zhu, Jia-Ning (author), Xiao, Wenlong (author), Zhao, Xinqing (author), Ma, Chaoli (author)Thermal conductivity is a key parameter for high performance material needed for electronic devices. While most commercially used Mg foundry alloys exhibit low thermal conductivities. In this work, we developed an Mg–3RE–0.5Zn alloy that is suitable for high pressure die cast (HPDC) ultrathin wall cellphone components. The thermal...journal article 2021
- document
-
Quan, D. (author), Zhao, Guoqun (author), Scarselli, Gennaro (author), Alderliesten, R.C. (author)A novel co-curing process was proposed for the bonding of carbon fibre/epoxy composites by replacing traditional epoxy adhesives with carbon fibre/PEEK (CF/PEEK) tapes, with an attempt to improve the structure integrity. The lap-shear strengths, fatigue resistance and mode-I and mode-II fracture behaviour of the co-cured joints at 22 °C and...journal article 2022
- document
-
Lantsoght, E.O.L. (author)One of the barriers to implementation of steel fiber reinforced concrete (SFRC) into structural applications is the lack of understanding of the shear behaviour of SFRC members. This paper proposes a theoretical model for the shear capacity of SFRC members with mild steel reinforcement based on the shear-carrying mechanisms and sectional...journal article 2023
- document
-
Ding, Chao (author), Wang, Jian (author), Liu, Tianhan (author), Qin, Hongbo (author), Yang, Daoguo (author), Zhang, Kouchi (author)Full intermetallic compound (IMC) solder joints present fascinating advantages in high-temperature applications. In this study, the mechanical properties and elastic anisotropy of η’-Cu6Sn5 and Cu3Sn intermetallic compounds were investigated using first-principles calculations. The values of single-crystal elastic constants, the elastic (E),...journal article 2021
- document
-
Xu, Y. (author), Šavija, B. (author)Auxetic cementitious composites (ACCs) with improved mechanical properties are created, by casting 3D printed polymeric auxetic reinforcement structures inside cementitious mortar. Four types of ACCs incorporating reinforcement with different auxetic mechanisms were prepared: “re-entrant” (RE), “rotating-square” (RS), “chiral” (CR) and ...journal article 2023
- document
-
Andrade, D. G. (author), Tankova, T. (author), Zhu, C. (author), Branco, R. (author), da Silva, L. Simões (author), Rodrigues, D. M. (author)The use of 3D printed stainless steel requires a deep knowledge of its mechanical properties. This paper presents material characterisation of 316LSi austenitic stainless-steel coupons manufactured by CMT-WAAM, considering different deposition directions. The specimens were tested according to ISO 6892-1, the fractures surfaces were examined...journal article 2024
- document
-
Li, Z. (author), Beltran, Irving Alfredo Flores (author), Chen, Y. (author), Šavija, B. (author), Ye, G. (author)In this study, glass wool waste was utilized by means of alkali-activation with blast furnace slag. Reaction kinetics, workability, mechanical properties and autogenous shrinkage of alkali-activated slag and glass wool were comprehensively studied. Results indicated an optimal modulus (SiO<sub>2</sub>/Na<sub>2</sub>O) of the activator related...journal article 2021
- document
-
Li, Z. (author), Delsaute, Brice (author), Lu, Tianshi (author), Kostiuchenko, A. (author), Staquet, Stéphanie (author), Ye, G. (author)This study aims to compare the developments of mechanical properties and autogenous shrinkage related properties of alkali-activated materials-based concrete (AC) and ordinary Portland cement-based concrete (OC) against curing age and degree of reaction. Temperature Stress Testing Machines are utilized to monitor the evolution of the internal...journal article 2021