Searched for: +
(1 - 20 of 86)

Pages

document
Zhu, G. (author), Xiao, Y. (author), Yang, Y. (author), Wang, J. (author), Sun, B. (author), Boom, R. (author)
Recycling of aluminum alloy scrap obtained from delaminated fibre metal laminates (FMLs) was studied through high temperature refining in the presence of a salt flux. The aluminum alloy scrap contains approximately mass fraction w(Cu) = 4.4%, w(Mg) = 1.1% and w(Mn) = 0.6% (2024 aluminum alloy). The main objective of this research is to obtain a...
journal article 2012
document
Zhu, G. (author), Xiao, Y. (author), Yang, Y. (author), Wang, J. (author), Sun, B. (author), Boom, R. (author)
GLARE (glass fibre/epoxy reinforced aluminum laminate) is a member of the fiber metal laminate (FML) family, and is built up of alternating metal and fiber layers. About 500m2 GLARE is employed in each Airbus A380 because of the superior mechanical properties over the monolithic aluminum alloys, such as weight reduction, improved damage...
journal article 2012
document
Li, Hai-Tao (author), Wang, Qi-bin (author), Zong, Zhi (author), Sun, Lei (author), Liang, Hui (author)
journal article 2014
document
Sun, Q. (author), Wang, Y. (author), Yang, J. (author), Qiu, Y. (author), Zhang, H. (author)
This paper presents a method to control chaotic behavior of a typical Smart Grid based on generalized fuzzy hyperbolic model (GFHM). As more and more distributed generations (DG) are incorporated into the Smart Grid, the chaotic behavior occurs increasingly. To verify the behavior, a dynamic model which describes a power system with DG is...
journal article 2014
document
Kim, SH (author), Joo, C. (author), Seong, A (author), Vafabakshsh, A (author), Botvinick, A (author), Berns, A (author), Palmer, TA (author), Wang, Z. (author), Ha, Seungkyu (author), Jakobsson, ME (author), Sun, M (author)
It is unclear that how subcellular organelles respond to external mechanical stimuli. Here, we investigated the molecular mechanisms by which mechanical force regulates Ca2+ signaling at endoplasmic reticulum (ER) in human mesenchymal stem cells. Without extracellular Ca2+, ER Ca2+ release is the source of intracellular Ca2+ oscillations induced...
journal article 2015
document
Kim, T.J. (author), Joo, C. (author), Seong, J. (author), Vafabakhsh, R. (author), Botvinick, E.L. (author), Berns, M.W. (author), Palmer, A.E. (author), Wang, N. (author), Ha, T. (author), Jakobsson, E. (author), Sun, J. (author), Wang, Y. (author)
It is unclear that how subcellular organelles respond to external mechanical stimuli. Here, we investigated the molecular mechanisms by which mechanical force regulates Ca2+ signaling at endoplasmic reticulum (ER) in human mesenchymal stem cells. Without extracellular Ca2+, ER Ca2+ release is the source of intracellular Ca2+ oscillations induced...
journal article 2015
document
Talantsev, E. F. (author), Crump, W. P. (author), Island, J.O. (author), Xing, Ying (author), Sun, Yi (author), Wang, Jian (author), Tallon, J. L. (author)
Recent experiments showed that thinning gallium, iron selenide and 2H tantalum disulfide to single/several monoatomic layer(s) enhances their superconducting critical temperatures. Here, we characterize these superconductors by extracting the absolute values of the London penetration depth, the superconducting energy gap, and the relative...
journal article 2017
document
Tangdamrongsub, N. (author), Steele-Dunne, S.C. (author), Gunter, B.C. (author), Ditmar, P.G. (author), Sutanudjaja, Edwin H. (author), Sun, Y. (author), Xia, Ting (author), Wang, Zhongjing (author)
An accurate estimation of water resources dynamics is crucial for proper management of both agriculture and the local ecology, particularly in semi-arid regions. Imperfections in model physics, uncertainties in model land parameters and meteorological data, as well as the human impact on land changes often limit the accuracy of hydrological...
journal article 2017
document
Sun, Chuan (author), Wu, Chaozhong (author), Chu, Duanfeng (author), Lu, Z. (author), Tan, Jian (author), Wang, Jianyu (author)
This paper aims to recognize driving risks in individual vehicles online based on a data-driven methodology. Existing advanced driver assistance systems (ADAS) have difficulties in effectively processing multi-source heterogeneous driving data. Furthermore, parameters adopted for evaluating the driving risk are limited in these systems. The...
journal article 2018
document
Liu, Nan (author), Liu, D. (author), Wang, Weifei (author), Hollmann, F. (author), Xu, Long (author), Ma, Yunjian (author), Yang, Bo (author), Bai, Weidong (author), Sun, Xiaotao (author), Wang, Yonghua (author)
α‐Linolenic acid‐rich diacylglycerol has been demonstrated with promising health promotion functions. This study examined the production, immobilization of lipase PCL, and its application in the synthesis of diacylglycerol by esterification of α‐linolenic acid with glycerol. The resin ECR8806 was selected as an effective support for the...
journal article 2018
document
Gu, C. (author), Wang, Qiannan (author), Sun, Wei (author)
The flexural response of ultrahigh performance fiber-reinforced concrete (UHPFRC) was simulated based on the lattice fracture model. Fiber was modelled as separated beam that was connected to the matrix with interface beams. The simulated results were compared with the experimental results. Deviations occurred at the late stage of the strain...
journal article 2018
document
Liu, Yang (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, Kouchi (author), Sun, Fenglian (author)
The microstructure, thickness, porosity, and shear performance of the silver (Ag) sintering layers under different sintering pressures were investigated. Experimental results demonstrated that the thickness and the porosity of the sintering layer decreased when the sintering pressure varied from 5 MPa to 30 MPa. This densification phenomenon...
journal article 2018
document
Zhang, H. (author), Liu, Yang (author), Wang, Lingen (author), Fan, Jiajie (author), Fan, Xuejun (author), Sun, Fenglian (author), Zhang, Kouchi (author)
High reliable packaging materials are needed for electronics when they work at harsh environments. Among which, the nanosilver material has been widely studied and applied in power electronics due to its low processing temperature and high reliability. This paper investigates the bonding properties of nanosilver sintered hermetic cavity. There...
journal article 2018
document
Gao, Weilun (author), Shao, Dongdong (author), Wang, Zhengbing (author), Nardin, William (author), Yang, Wei (author), Sun, Tao (author), Cui, Baoshan (author)
River mouth bar formation, a key process in fluvial-deltaic morphodynamics, is subject to both river discharge and waves. Given the increasing variability of both forcings under continuous climate change and human interventions, assessing their combined effects on mouth bar formatio n is an imperative issue. In this study, an extensive set of...
journal article 2018
document
Santagata, F. (author), Sun, J. (author), Iervolino, E. (author), Yu, H. (author), Wang, F. (author), Zhang, Kouchi (author), Sarro, Pasqualina M (author), Zhang, Guoyi (author)
Purpose: The purpose of this paper is to demonstrate a novel 3D system-in-package (SiP) approach. This new packaging approach is based on stacked silicon submount technology. As demonstrators, a smart lighting module and a sensor systems were successfully developed by using the fabrication and assembly process described in this paper. Design...
journal article 2018
document
Sun, Sihao (author), Sijbers, Leon (author), Wang, Xuerui (author), de Visser, C.C. (author)
In order to achieve high-speed flight of a damaged quadrotor with complete loss of a single rotor, a multiloop hybrid nonlinear controller is designed. By fully making use of sensor measurements, the model dependence of this control method is reduced, which is conducive to handling disturbance from the unknown aerodynamic effects. This...
journal article 2018
document
Wang, R. (author), Sun, X. (author), Ould-Chikh, Samy (author), Osadchii, D. (author), Bai, F. (author), Kapteijn, F. (author), Gascon, Jorge (author)
A nitrogen-doped carbon was synthesized through the pyrolysis of the well-known metal-organic framework ZIF-8, followed by a subsequent acid treatment, and has been applied as a catalyst in the electrochemical reduction of carbon dioxide. The resulting electrode shows Faradaic efficiencies to carbon monoxide as high as ∼78%, with hydrogen...
journal article 2018
document
Sun, J. (author), Zhan, Teng (author), Liu, Zewen (author), Wang, Junxi (author), Yi, Xiaoyan (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)
This paper demonstrates a method to reduce the decay time in AlGaN/GaN photodetectors by a pulsed heating mode. A suspended AlGaN/GaN heterostructure photodetector integrated with a micro-heater is fabricated and characterized under ultraviolet illumination. We have observed that the course of persistent photoconductivity was effectively...
journal article 2019
document
Sun, Y. (author), Kang, Xuanwu (author), Zheng, Yingkui (author), Lu, Jiang (author), Tian, Xiaoli (author), Wei, Ke (author), Wu, Hao (author), Wang, Wenbo (author), Liu, Xinyu (author), Zhang, Kouchi (author)
Gallium nitride (GaN)-based vertical power Schottky barrier diode (SBD) has demonstrated outstanding features in high-frequency and high-power applications. This paper reviews recent progress on GaN-based vertical power SBDs, including the following sections. First, the benchmark for GaN vertical SBDs with different substrates (Si, sapphire, and...
review 2019
document
Zhang, H. (author), Liu, Y. (author), Wang, Lingen (author), Sun, Fenglian (author), Fan, Jiajie (author), Placette, Mark D. (author), Fan, Xuejun (author), Zhang, Kouchi (author)
Modern power electronics has the increased demands in current density and high-temperature reliability. However, these performance factors are limited due to the die attach materials used to affix power dies microchips to electric circuitry. Although several die attach materials and methods exist, nanosilver sintering technology has received...
journal article 2019
Searched for: +
(1 - 20 of 86)

Pages