Searched for: +
(1 - 20 of 77)

Pages

document
Jing, H. (author), Li, C. (author), Zhou, B. (author)
In this paper, some five-point finite difference schemes for steady convection-diffusion problems are presented. To begin with, we use the finite volume method (FVM) to discretize the convection-diffusion equation. After that, we present two five-point difference schemes for the approximation of the first order derivatives on faces, one of which...
conference paper 2006
document
Zhou, J. (author), Qian, S. (author), Sierra Beltran, M.G. (author), Ye, G. (author), Van Breugel, K. (author), Li, V.C. (author)
Nowadays limestone powder and blast furnace slag (BFS) are widely used in concrete as blended materials in cement. The replacement of Portland cement by limestone powder and BFS can lower the cost and enhance the greenness of concrete, since the production of these two materials needs less energy and causes less CO2 emission than Portland cement...
journal article 2009
document
Qian, S. (author), Li, V.C. (author), Zhou, J. (author)
Strain hardening cementitious composites (SHCCs) have seen increasing field applications in past decade, yet existing quality control test methods for tensile properties are sometime difficult to implement. This paper presents a new simple inverse method for quality control of tensile strain capacity by conducting beam flexural test. It is shown...
conference paper 2010
document
Maresca, D. (author), Jansen, K. (author), Renaud, G. (author), Van Soest, G. (author), Li, X. (author), Zhou, Q. (author), De Jong, N. (author), Shung, K.K. (author), Van der Steen, A.F.W. (author)
We demonstrate the feasibility of intravascular ultrasound (IVUS) chirp imaging as well as chirp reversal ultrasound contrast imaging at intravascular ultrasound frequency. Chirp excitations were emitted with a 34?MHz single crystal intravascular transducer and compared to conventional Gaussian-shaped pulses of equal acoustic pressure. The...
journal article 2012
document
Li, S. (author), Zhou, Y. (author)
Abstract only.
conference paper 2013
document
Jansen, K. (author), Van der Steen, A.F.W. (author), Wu, M. (author), Van Beusekom, H.M.M. (author), Springeling, G. (author), Li, X. (author), Zhou, Q. (author), Shung, K.K. (author), De Kleijn, D.P.V. (author), Van Soest, G. (author)
The natural history of atherosclerosis is marked by changes in the lipid biochemistry in the diseased arterial wall. As lesions become more vulnerable, different cholesterol species accumulate in the plaque. Understanding unstable atherosclerosis as a pharmacological and interventional therapeutic target requires chemically specific imaging of...
journal article 2014
document
Ying, Shen (author), Jin, Fengzan (author), Guo, Renzhong (author), Li, Lin (author), Yang, Jie (author), Zhou, Yujie (author)
Due to the fast growth of building construction technology and increasing demands on the efficient use of land, human living space are expanded from on the surface to above and under the earth surface. It raises the need for three dimentional (3D) cadastral by realizing that the current cadastral system based on 2D is not appropriate to reflect...
conference paper 2014
document
Active drag reduction of a turbulent boundary layer has been experimentally investigated using periodic blowing through one array of streamwise slits. Local skin-friction drag exhibits a strong dependence on control parameters, including the blowing amplitude A+ and frequency f +. A maximum drag reduction of almost 70% has been achieved at x+=33...
conference paper 2015
document
Zhang, L. (author), Li, X. (author), Li, D. (author), Zhou, C. (author)
Important engineered slopes are often heavily instrumented and their performance routinely monitored through these instruments. The evaluation of the safety of the slopes based on the monitored information is however a challenge. A systematic method is presented in this paper for evaluating the slope safety by combining multi-source monitoring...
conference paper 2015
document
Zhu, Qing (author), Li, Yun (author), Xiong, Qing (author), Zlatanova, S. (author), Ding, Yulin (author), Zhang, Yeting (author), Zhou, Yan (author)
The Open Geospatial Consortium (OGC) Geography Markup Language (GML) standard provides basic types and a framework for defining geo-informational data models such as CityGML and IndoorGML, which provide standard information models for 3D city modelling and lightweight indoor network navigation. Location information, which is the semantic engine...
journal article 2016
document
Xiao, Tianhang (author), Li, Zhengzhou (author), Deng, S. (author), Ang, Haisong (author), Zhou, Xinchun (author)
The aerodynamic characteristics around a micro air vehicle wing with an inverse-Zimmerman configuration are numerically investigated by an in-house programmed solver particularly dedicated for aircrafts operating in low Reynolds number regime. The complex three-dimensional aerodynamic performance was investigated in terms of force generation...
journal article 2016
document
Li, Chuanrong (author), Zhou, Mei (author), Liu, Menghua (author), Ma, Lian (author), Wang, J. (author)
Concealed cars extraction from point clouds data acquired by airborne laser scanning has gained its popularity in recent years. However, due to the occlusion effect, the number of laser points for concealed cars under trees is not enough. Thus, the concealed cars extraction is difficult and unreliable. In this paper, 3D point cloud...
journal article 2016
document
Xiong, Qing (author), Zhu, Qing (author), Du, Zhiqiang (author), Zlatanova, S. (author), Zhang, Yeting (author), Zhou, Yan (author), Li, Yun (author)
Intelligent navigation and facility management in complex indoor environments are issues at the forefront of geospatial information science. Indoor spaces with fine geometric and semantic descriptions provide a solid foundation for various indoor applications, but it is difficult to comprehensively extract free multi-floor indoor spaces from...
journal article 2016
document
Li, Y. (author), Zhou, J. (author), Pavanram, P. (author), Leeflang, M.A. (author), Fockaert, L.I. (author), Pouran, B. (author), Tümer, N. (author), Schröder, K. U. (author), Mol, J.M.C. (author), Weinans, Harrie (author), Jahr, H. (author), Zadpoor, A.A. (author)
An ideal bone substituting material should be bone-mimicking in terms of mechanical properties, present a precisely controlled and fully interconnected porous structure, and degrade in the human body to allow for full regeneration of large bony defects. However, simultaneously satisfying all these three requirements has so far been highly...
journal article 2017
document
Li, Nana (author), Jia, Li (author), Lu, Jing (author), Menenti, M. (author), Zhou, J. (author)
The regional surface soil heat flux (G0) estimation is very important for the large-scale land surface process modeling. However, most of the regional G0 estimation methods are based on the empirical relationship between G0 and the net radiation flux. A physical model based on harmonic analysis was improved (referred to as "HM model") and...
journal article 2017
document
Wang, S. (author), Xu, Y. (author), Zhou, J. (author), Li, H. (author), Chang, Jiang (author), Huan, Z. (author)
Iron-matrix composites with calcium silicate (CS) bioceramic as the reinforcing phase were fabricated through powder metallurgy processes. The microstructures, mechanical properties, apatite deposition and biodegradation behavior of the Fe-CS composites, as well as cell attachment and proliferation on<br/>their surfaces, were characterized. In...
journal article 2017
document
Li, Y. (author), Yong, Bin (author), van Oosterom, P.J.M. (author), Lemmens, M.J.P.M. (author), Wu, Huayi (author), Ren, Liliang (author), Zheng, Mingxue (author), Zhou, Jiajun (author)
The capability of acquiring accurate and dense three-dimensional geospatial information that covers large survey areas rapidly enables airborne light detection and ranging (LiDAR) has become a powerful technology in numerous fields of geospatial applications and analysis. LiDAR data filtering is the first and essential step for digital elevation...
journal article 2017
document
Zheng, Chaolei (author), Jia, L. (author), Hu, Guangcheng (author), Menenti, M. (author), Lu, Jing (author), Zhou, J. (author), Wang, Kun (author), Li, Zhansheng (author)
The Pan-Eurasian and African Continents are characterized by large ranges of climates varying from humid, semi-humid, semi-arid and arid regions, and great challenges exist in water allocation for different sectors that related to water resource and food security, which depends strongly on the water use information. Quantitative information...
journal article 2017
document
Wang, Xu Ping (author), Zhou, Peng Fei (author), Li, Zhi Gang (author), Yang, Bo (author), Hollmann, F. (author), Wang, Yong Hua (author)
A Ser105Ala mutant of the lipase B from Candida antarctica enables 'perhydrolase-only' reactions. At the example of the chemoenzymatic Baeyer-Villiger oxidation of cyclohexanone, we demonstrate that with this mutant selective oxidation can be achieved in deep eutectic solvent while essentially eliminating the undesired hydrolysis reaction of...
journal article 2017
document
Li, Y. (author), Jahr, H. (author), Lietaert, K. (author), Pavanram, P. (author), Yilmaz, A. (author), Fockaert, L.I. (author), Leeflang, M.A. (author), Pouran, B. (author), Gonzalez Garcia, Y. (author), Weinans, Harrie (author), Mol, J.M.C. (author), Zhou, J. (author), Zadpoor, A.A. (author)
Additively manufactured (AM) topologically ordered porous metallic biomaterials with the proper biodegradation profile offer a unique combination of properties ideal for bone regeneration. These include a fully interconnected porous structure, bone-mimicking mechanical properties, and the possibility of fully regenerating bony defects. Most...
journal article 2018
Searched for: +
(1 - 20 of 77)

Pages