Searched for: +
(1 - 20 of 91)

Pages

List view
Grid view
document
Krasilnikov, V.I. (author), Zhang, Z. (author), Hong, F. (author), Ponkratov, D.V. (author), Sun, J.Y. (author)
conference paper 2007
document
Sun, Q. (author), Wang, Y. (author), Yang, J. (author), Qiu, Y. (author), Zhang, H. (author)
This paper presents a method to control chaotic behavior of a typical Smart Grid based on generalized fuzzy hyperbolic model (GFHM). As more and more distributed generations (DG) are incorporated into the Smart Grid, the chaotic behavior occurs increasingly. To verify the behavior, a dynamic model which describes a power system with DG is...
journal article 2014
document
Liang, K. (author), Zhang, Y. (author), Sun, Q. (author), Ruess, M. (author)
A knock-down factor is commonly used to take into account the obvious decline of the buckling load in a cylindrical shell caused by the inevitable imperfections. In 1968, NASA guideline SP-8007 gave knock-down factors which rely on a lower-bound curve taken from experimental data. Recent research has indicated that the NASA knock-down factors...
journal article 2015
document
Van Loon, F.D. (author), Pouderoijen, M.T. (author), Alberini, E. (author), Dijkstra, C.M. (author), Hagen, S.R. (author), De Jong, M. (author), Kiliço?lu, I.D. (author), Koukouvelou, A. (author), Mekel, M.L. (author), Schotting, K. (author), Shao, S. (author), Sun, X. (author), Terzi, O. (author), De Waal, W. (author), Van der Wal, I.A. (author), Zhang, B. (author)
Booklet of the elective course AR0048 2014/2015 ‘Landscape Architecture ON site - being part of Oerol’, an elective course of the MSc2 - Chair of Landscape Architecture at the TU Delft.
book 2015
document
Sokolovskij, R. (author), Sun, J. (author), Santagata, F. (author), Iervolino, E. (author), Li, S. (author), Zhang, G.Y. (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)
A method for highly controllable etching of AlGaN/GaN for the fabrication of high sensitivity HEMT based sensors is developed. The process consists of cyclic oxidation of nitride with O<sub>2</sub> plasma using ICP-RIE etcher followed by wet etching of the oxidized layer. Previously reported cyclic oxidation-based GaN etching obtained very...
journal article 2016
document
Zhang, A. (author), Sun, Y. (author), Huang, Qiong (author), Bokel, R.M.J. (author), van den Dobbelsteen, A.A.J.F. (author)
This paper discusses the energy impact of corridor design for school buildings in the cold climate of China. Local school buildings were classified into three types in terms of the corridor design patterns. Architectural related parameters of corridors which could have a potential impact on the energy consumption were summarized and discussed,...
conference paper 2017
document
Sun, Zhu (author), Yang, J. (author), Zhang, Jie (author), Bozzon, A. (author), Chen, Yu (author), Xu, Chi (author)
Representation learning (RL) has recently proven to be effective in capturing local item relationships by modeling item co-occurrence in individual user's interaction record. However, the value of RL for recommendation has not reached the full potential due to two major drawbacks: 1) recommendation is modeled as a rating prediction problem...
conference paper 2017
document
Sun, B. (author), Fan, Xuejun (author), Li, Lei (author), Ye, H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
This paper studies the interaction of catastrophic failure of the driver and LED luminous flux decay for an integrated LED lamp with an electrolytic capacitor-free LED driver. Electronic thermal simulations are utilized to obtain the lamp's dynamic history of temperature and current for two distinct operation modes: constant current mode (CCM...
journal article 2017
document
Zhang, A. (author), Bokel, R.M.J. (author), van den Dobbelsteen, A.A.J.F. (author), Sun, Y. (author), Huang, Qiong (author), Zhang, Qi (author)
This paper discusses the role of geometry parameters including building shape, window to wall ratio, room depth, and orientation on the energy use and thermal comfort of school buildings in cold climates of China. The annual total energy demand and summer thermal discomfort time were compared through computer simulations with DesignBuilder....
journal article 2017
document
Sun, B. (author), Fan, Xuejun (author), Fan, J. (author), Zhang, Kouchi (author), Qian, Cheng (author)
In this work, a physics-of-failure (PoF) reliability prediction methodology is combined with statistical models to consider the interaction between the lumen depreciation and catastrophic failures of LEDs. The current in each LED may redistribute when the catastrophic failure occurs in one of LEDs in an array, thus affecting the operation...
conference paper 2017
document
Sun, B. (author), Fan, Xuejun (author), Ye, H. (author), Fan, Jiajie (author), Qian, Cheng (author), van Driel, W.D. (author), Zhang, Kouchi (author)
In this paper, an integrated LED lamp with an electrolytic capacitor-free driver is considered to study the coupling effects of both LED and driver's degradations on lamp's lifetime. An electrolytic capacitor-less buck-boost driver is used. The physics of failure (PoF) based electronic thermal simulation is carried out to simulate the lamp's...
journal article 2017
document
Yang, J. (author), Sun, Zhu (author), Bozzon, A. (author), Zhang, J. (author), Larson, M.A. (author)
The "International Workshop on Recommender Systems for Citizens" (CitRec) is focused on a novel type of recommender systems both in terms of ownership and purpose: recommender systems run by citizens and serving society as a whole.
conference paper 2017
document
Zhan, X. (author), Liu, Chuang (author), Zhou, Ge (author), Zhang, Zi-Ke (author), Sun, Gui-Quan (author), Zhu, Jonathan J. H. (author), Jin, Zhen (author)
The interaction between disease and disease information on complex networks has facilitated an interdisciplinary research area. When a disease begins to spread in the population, the corresponding information would also be transmitted among individuals, which in turn influence the spreading pattern of the disease. In this paper, firstly, we...
journal article 2018
document
Liu, Yang (author), Zhang, H. (author), Wang, Lingen (author), Fan, Xuejun (author), Zhang, Kouchi (author), Sun, Fenglian (author)
The microstructure, thickness, porosity, and shear performance of the silver (Ag) sintering layers under different sintering pressures were investigated. Experimental results demonstrated that the thickness and the porosity of the sintering layer decreased when the sintering pressure varied from 5 MPa to 30 MPa. This densification phenomenon...
journal article 2018
document
Zhang, H. (author), Liu, Yang (author), Wang, Lingen (author), Fan, Jiajie (author), Fan, Xuejun (author), Sun, Fenglian (author), Zhang, Kouchi (author)
High reliable packaging materials are needed for electronics when they work at harsh environments. Among which, the nanosilver material has been widely studied and applied in power electronics due to its low processing temperature and high reliability. This paper investigates the bonding properties of nanosilver sintered hermetic cavity. There...
journal article 2018
document
Sun, Bo (author), Fan, Xuejun (author), van Driel, W.D. (author), Cui, Chengqiang (author), Zhang, Kouchi (author)
In this study, we present a general methodology that combines the reliability theory with physics of failure for reliability prediction of an LED driver. More specifically, an integrated LED lamp, which includes an LED light source with statistical distribution of luminous flux, and a driver with a few critical components, is considered. The...
journal article 2018
document
Qian, C. (author), Mirza Gheytaghi, Amir (author), Fan, J. (author), Tang, H. (author), Sun, B. (author), Ye, H. (author), Zhang, Kouchi (author)
As an increasing attention towards sustainable development of energy and environment, the power electronics (PEs) are gaining more and more attraction on various energy systems. The insulated gate bipolar transistor (IGBT), as one of the PEs with numerous advantages and potentials for development of higher voltage and current ratings, has been...
journal article 2018
document
Sun, Zhu (author), Yang, J. (author), Zhang, J. (author), Bozzon, A. (author), Huang, Long Kai (author), Xu, Chi (author)
Knowledge graphs (KGs) have proven to be effective to improve recommendation. Existing methods mainly rely on hand-engineered features from KGs (e.g., meta paths), which requires domain knowledge. This paper presents RKGE, a KG embedding approach that automatically learns semantic representations of both entities and paths between entities...
conference paper 2018
document
Sun, B. (author), Fan, J. (author), Fan, Xuejun (author), Zhang, Kouchi (author)
This work studies the effect of randomness of LED's lumen depreciation on reliability of the entire LED lamp. An integrated LED light bulb is selected as carrier of the proposed method. A PoF based lumen depreciation model and electronic-thermal simulations are introduced for reliability prediction. The normal distribution is used to describe...
conference paper 2018
document
Santagata, F. (author), Sun, J. (author), Iervolino, E. (author), Yu, H. (author), Wang, F. (author), Zhang, Kouchi (author), Sarro, Pasqualina M (author), Zhang, Guoyi (author)
Purpose: The purpose of this paper is to demonstrate a novel 3D system-in-package (SiP) approach. This new packaging approach is based on stacked silicon submount technology. As demonstrators, a smart lighting module and a sensor systems were successfully developed by using the fabrication and assembly process described in this paper. Design...
journal article 2018
Searched for: +
(1 - 20 of 91)

Pages

List view
Grid view