Searched for: author%253A%2522Rubio%2520Carpio%252C%2520A.%2522
(1 - 20 of 23)

Pages

document
Terracol, Marc (author), Manueco, Lucas (author), Manoha, Eric (author), Avallone, F. (author), Ragni, D. (author), Rubio Carpio, A. (author)
This study presents a numerical investigation of the noise mitigation effect provided by several fairings placed upstream of a simplified two-wheel landing gear. The chosen configuration is equipped with detachable elements that mimic realistic components, e.g. brakes and torque link, to include representative landing gear noise sources. Several...
conference paper 2023
document
Arcondoulis, E.J.G. (author), Liu, Y. (author), Ragni, D. (author), Avallone, F. (author), Rubio Carpio, A. (author), Sedaghatizadeh, N. (author), Yang, Y. (author), Li, Z. (author)
Vortex shedding in the wake of a cylinder in uniform flow can be suppressed via the application of a porous coating; however, the suppression mechanism is not fully understood. The internal flow field of a porous coated cylinder (PCC) can provide a deeper understanding of how the flow within the porous medium affects the wake development. A...
journal article 2023
document
Arcondoulis, Elias J. G. (author), Liu, Yu (author), Yang, Yannian (author), Ragni, D. (author), Rubio Carpio, A. (author), Avallone, F. (author)
The application of a porous coating to a cylinder can significantly reduce the vortex shedding tone when placed in a uniform flow. The mechanism of how this porous media attenuates vortex shedding has been studied more in recent years yet it is still not fully understood. Typical porous materials within a certain range of porosity and airflow...
conference paper 2022
document
Bennett, Gareth J. (author), Lai, Jiang (author), O'Brien, Gordon C. (author), Ragni, D. (author), Avallone, F. (author), Rubio Carpio, A. (author), Pott-Pollenske, Michael (author)
This paper examines the use of both flow control and passive low noise technologies to reduce the aerodynamic noise radiated from a modified LAGOON landing gear, as tested in the EU funded H2020 collaborative research project: INVENTOR, InnoVative dEsign of iNstalled airframe componenTs for aircraft nOise Reduction. At approach to landing,...
conference paper 2022
document
Gondrum, M. (author), Niemöller, A. (author), Meinke, M. (author), Schröder, W. (author), Rubio Carpio, A. (author), Ragni, D. (author), Avallone, F. (author)
The time resolved flow and acoustic fields around a simplified two-wheel nose landing gear configuration featuring brakes, torque link, and a detachable fairing are investigated by numerical and experimental means. The flow field is computed by a lattice Boltzmann method with a collision step based on countable cumulants. Numerical near field...
conference paper 2022
document
Rubio Carpio, A. (author)
Permeable trailing edges are experimentally investigated in this thesis as a mean tomitigate aeroacoustic noise. The first part of the study is devoted to deciphering themechanisms of noise generation involved in these devices. To this aim, trailing-edge inserts are manufactured employing commercially-produced open-cell metallic foams with...
doctoral thesis 2021
document
Teruna, C. (author), Avallone, F. (author), Ragni, D. (author), Rubio Carpio, A. (author), Casalino, D. (author)
Lattice Boltzmann simulations were carried out to investigate the noise mitigation mechanisms of a 3-D printed porous trailing-edge insert, elucidating the link between noise reduction and material permeability. The porous insert is based on a unit cell resembling a lattice of diamond atoms. It replaces the last 20 % chord of a NACA 0018 at...
journal article 2021
document
Teruna, C. (author), Avallone, F. (author), Ragni, D. (author), Casalino, D. (author), Rubio Carpio, A. (author)
This manuscript presents a numerical investigation of an open-cell 3D-printed perme-able/porous insert used to reduce turbulent boundary layer-trailing edge (TBL-TE) noise. The matrix topology of the insert resembles the lattice of diamond atoms, and thus, it is also referred to as the diamond trailing edge (TE). The porous insert replaces...
conference paper 2021
document
Arcondoulis, Elias J. G. (author), Liu, Yu (author), Yang, Yannian (author), Ragni, D. (author), Rubio Carpio, A. (author), Avallone, F. (author)
View Video Presentation: https://doi-org.tudelft.idm.oclc.org/10.2514/6.2021-2226.vid<br/><br/>The mechanisms responsible for vortex shedding reduction, due to the application of a porous coating to a smooth cylinder placed in uniform flow, are still uncertain despite several numerical and experimental studies. To help understand these...
conference paper 2021
document
Merino Martinez, R. (author), Rubio Carpio, A. (author), Lima Pereira, L.T. (author), van Herk, S.W.L. (author), Avallone, F. (author), Ragni, D. (author), Kotsonis, M. (author)
The newly refurbished vertical tunnel (V-tunnel) at Delft University of Technology has been redesigned as a state-of-the-art facility for research in aeroacoustics (A-tunnel), as well as fundamental studies in laminar-turbulent transition and flow control. This manuscript focuses on the design and refurbishment aspects of the facility,...
journal article 2020
document
Rubio Carpio, A. (author), Avallone, F. (author), Ragni, D. (author), Snellen, M. (author), van der Zwaag, S. (author)
An experimental study on broadband noise scattered by permeable trailing edges with different pore arrangements is performed. A NACA 0018 airfoil with chord c = 0.2 m is investigated at chord-based Reynolds numbers ranging from 1.4 × 10<sup>5</sup> to 3.8 × 10<sup>5</sup> and angles of attack of 0.2 and 5.4 degrees. Noise emission from five...
journal article 2020
document
Merino Martinez, R. (author), Luesutthiviboon, S. (author), Zamponi, R. (author), Rubio Carpio, A. (author), Ragni, D. (author), Sijtsma, P. (author), Snellen, M. (author), Schram, Christophe (author)
In this paper, the performance of four acoustic imaging methods: conventional frequency domain beamforming (CFDBF), functional beamforming (FUNBF), enhanced high resolution CLEAN–SC (EHR–CLEAN–SC) and generalized inverse beamforming (GIBF), is investigated in terms of accuracy and variability. Three experimental test cases are considered: 1)...
journal article 2020
document
Rubio Carpio, A. (author), Avallone, F. (author), Ragni, D. (author), Snellen, M. (author), van der Zwaag, S. (author)
The turbulent flow over a porous trailing edge of a NACA 0018 airfoil is experimentally investigated to study the link between the hydrodynamic flow field and the acoustic scattering. Four porous trailing edges, obtained from open-cell metal foams, are tested to analyze the effects on far-field noise of the permeability of the material and of...
journal article 2019
document
Mayer, Jonathan (author), Rubio Carpio, A. (author), Ragni, D. (author)
The present work analyses broadband noise scattering from permeable trailing edges with identical micro-structure but under a change of temperature. Experiments are performed in an anechoic wind tunnel using a NACA0018 airfoil at chord-based Reynolds numbers between 1.88 × 10<sup>5</sup> and 3.14 × 10<sup>5</sup> and no incidence. A...
journal article 2019
document
Rubio Carpio, A. (author), Merino Martinez, R. (author), Avallone, F. (author), Ragni, D. (author), Snellen, M. (author), van der Zwaag, S. (author)
The hydrodynamic and acoustic fields for a NACA 0018 with solid and porous trailing edge inserts are investigated. The porous inserts, covering 20% of the chord, are manufactured with metal foams with cell diameters of 450 and 800 μm and permeability values of 6 × 10−10 and 2.7 × 10−9 m2. The experiments are performed at a chord-based Reynolds...
journal article 2019
document
Hedayati, R. (author), Rubio Carpio, A. (author), Luesutthiviboon, S. (author), Ragni, D. (author), Avallone, F. (author), Casalino, D. (author), van der Zwaag, S. (author)
Studies on porous trailing edges, manufactured with open-cell Ni-Cr-Al foams with sub-millimeter pore sizes, have shown encouraging results for the mitigation of turbulent boundary-layer trailing-edge noise. However, the achieved noise mitigation is typically dependent upon the pore geometry, which is fixed after manufacturing. In this study,...
journal article 2019
document
Merino Martinez, R. (author), Sijtsma, P. (author), Rubio Carpio, A. (author), Zamponi, R. (author), Luesutthiviboon, S. (author), Malgoezar, A.M.N. (author), Snellen, M. (author), Schram, Christophe (author), Simons, D.G. (author)
Most acoustic imaging methods assume the presence of point sound sources and, hence, may fail to correctly estimate the sound emissions of distributed sound sources, such as trailing-edge noise. In this contribution, three integration techniques are suggested to overcome this issue based on models considering a single point source, a line...
journal article 2019
document
Rubio Carpio, A. (author), Avallone, F. (author), Ragni, D. (author), Snellen, M. (author), van der Zwaag, S. (author)
Turbulent boundary layer trailing-edge noise scattered by a NACA0018 airfoil equipped with 3D printed perforated trailing-edge inserts, i.e. with straight cylindrical channels connecting the two sides of the airfoil, is investigated. The inserts have different permeability in order to assess the effect of this property on broadband noise...
conference paper 2019
document
Teruna, C. (author), Manegar, F.A. (author), Avallone, F. (author), Casalino, D. (author), Ragni, D. (author), Rubio Carpio, A. (author), Carolus, Thomas (author)
This manuscript presents a numerical investigation of the turbulent boundary layer-trailing edge (TBL-TE) noise reduction with an open-cell porous material. The implementation of the porous media is verified by emulating a facility for characterizing the flow resistivity of the porous material. Subsequently, the porous media is applied on the...
conference paper 2019
document
Arcondoulis, Elias J. G. (author), Ragni, D. (author), Rubio Carpio, A. (author), Avallone, F. (author), Liu, Yu (author), Yang, Yannian (author), Li, Zhiyong (author)
Porous coated cylinders have been shown to reduce the vortex shedding tone and broadband noise of a bare cylinder placed in uniform flow within specific Reynolds number regimes. The processes by which the vortex shedding and thus tone suppression take place are still uncertain despite numerous numerical and experimental studies. It is understood...
conference paper 2019
Searched for: author%253A%2522Rubio%2520Carpio%252C%2520A.%2522
(1 - 20 of 23)

Pages