Screening of representative rainfall event series for long-term hydrological performance evaluation of grassed swales

Evaluation of the hydrological performance of grassed swales usually needs long-term monitoring data. At present, suitable techniques for simulating the hydrological performance using limited monitoring data are not available. Therefore, current study aims to investigate the relationship between saturated hydraulic conductivity (K_s...

Time-varying characteristics of saturated hydraulic conductivity in grassed swales based on the ensemble Kalman filter algorithm: A case study of two long-running swales in Netherlands

Saturated hydraulic conductivity (K_s) of the filler layer in grassed swales are varying in the changing environment. In most of the hydrological models, K_s is assumed as constant or decrease with a clogging factor. However, the K_s measured on site cannot be the input of the hydrological model directly....

A comprehensive review on the long-term performance of stormwater biofiltration systems (SBS): Operational challenges and future directions

Stormwater biofiltration systems (SBS) are a popular technology for mitigating the negative effects of urbanization on the hydrological processes and water quality in urban areas. However, little is known about SBS's long-term performance in actual field conditions. The findings of a review of the scientific literature on the long-term...

An evaluation of the information literacy of safety professionals

Information literacy has gradually become one of the necessary qualities in current and future safety practices. The calculation and assessment of information literacy of safety professionals is an effective way to understand their information literacy level. This paper, therefore, aims to evaluate the information literacy level of safety...

Safety and security of oil and gas pipeline transportation: A systematic analysis of research trends and future needs using WoS

The terrorist attack on the Abqaiq oil plant in Saudi Arabia on September 14, 2019 attracted global attention to the significant role of safety and security in the sustainable oil and gas supply chain and the vulnerability of supply infrastructures subject to intentional and unintentional damages. Different from other oil and gas supply...

A method for identifying the boundary of regions in welded coupon specimens using digital image correlation

The coupon specimen with a transverse butt weld in the middle could be used for determining local constitutive properties of the heat-affected zone (HAZ) and the weld metal (WM) based on the digital image correlation (DIC). However, limited research is reported to demonstrate how to identify the boundary of each region in DIC results....

Fracture simulation of partially threaded bolts under tensile loading

Failure of bolts exposed to tension is generally avoided in the design of bolted connections due to the smaller deformation capacity of bolts than the connected plates. This is one of the reasons why few studies focus on the tensile failure behaviour of bolts. However, failure behaviour of bolts is essential for the advanced finite element...

Fracture simulation of a demountable steel-concrete bolted connector in push-out tests

Many bolted connectors were proposed for use in steel-concrete composite structures over the past few decades. This is because using bolted connectors could make the assembly and disassembly of steel-concrete composite structures more convenient and reusing the dismantled structural components could also improve structural sustainability. Lots...

Validation and application of bearing and block tearing resistance: Background to prEN1993-1-8:2021

An investigation of bolted connections with a specific geometry and bolt arrangement that require high local ductility to achieve the predicted resistances according to the design rules of the new prEN 1993-1-8 is presented. The experimental campaign includes tensile and shear tests on mild steel coupons to calibrate the parameters used for the...

Ductile damage model calibration for high-strength structural steels

Numerical analyses incorporating appropriate damage models provide an opportunity to predict the strength and deformation capacity of steel structures. This paper presents a practical calibration for the ductile damage model of S355 and high-strength steel S690Q, S700MC, S960Q based on tensile coupon test results. A combined linear and power...

Questions and dependency in intuitionistic logic

In recent years, the logic of questions and dependencies has been investigated in the closely related frameworks of inquisitive logic and dependence logic. These investigations have assumed classical logic as the background logic of statements, and added formulas expressing questions and dependencies to this classical core. In this paper, we...

Uniform definability in propositional dependence logic

Both propositional dependence logic and inquisitive logic are expressively complete. As a consequence, every formula in the language of inquisitive logic with intuitionistic disjunction or intuitionistic implication can be translated equivalently into a formula in the language of propositional dependence logic without these two connectives....

Propositional team logics

We consider team semantics for propositional logic, continuing In team semantics the truth of a propositional formula is considered in a set of valuations, called a team, rather than in an individual valuation. This offers the possibility to give meaning to concepts such as dependence, independence and inclusion. We associate with every...

Hydrological Changes of the Irtysh River and the Possible Causes

Hydrological changes of the Irtysh River were analyzed concerning the changes of annual runoff and its distribution features within a year measured by coefficient of variation and concentration degree. Abrupt changes were detected by the heuristic segmentation method. Possible causes of the hydrological changes were investigated considering...

On pixel detection threshold in the gigavision camera

Magnetic properties of Dy nanoparticles and Al2O3-coated Dy nanocapsules