Searched for: author%3A%22Ataei+Dadavi%2C+I.%22
(1 - 9 of 9)
document
Ataei Dadavi, I. (author)
In the chain of steel production, the blast furnace converts iron ore into liquid iron. The hearth of the blast furnace, where the liquid metal is collected and tapped off, is filled with relatively large coke particles (D ~ 20 – 100 mm). The meandering flow of hot liquid metal in the coarse-grained porous medium in the hearth causes erosion of...
doctoral thesis 2020
document
Chakkingal, M. (author), Schiavo, Sabino (author), Ataei Dadavi, I. (author), Tummers, M.J. (author), Kleijn, C.R. (author), Kenjeres, S. (author)
We numerically investigate natural convection in a bottom-heated top-cooled cavity, fully and partially filled with adiabatic spheres (with diameter-to-cavity-size ratio d/L=0.2) arranged in a Simple Cubic Packing (SCP) configuration. We study the influence of packing height and location of porous media. We carry out the simulations using...
journal article 2020
document
Chakkingal, M. (author), de Geus, Julia (author), Kenjeres, S. (author), Ataei Dadavi, I. (author), Tummers, M.J. (author), Kleijn, C.R. (author)
We report numerical simulations of assisting and opposing mixed convection in a side-heated, side-cooled cavity packed with relatively large solid spheres. The mixed convection is generated by imposing a movement on the isothermal vertical walls, either in or opposite to the direction of natural convection flow. For a fluid Prandtl number of...
journal article 2020
document
Chakkingal, M. (author), Kenjeres, S. (author), Ataei Dadavi, I. (author), Tummers, M.J. (author), Kleijn, C.R. (author)
We report numerical simulations of natural convection and conjugate heat transfer in a differentially heated cubical cavity packed with relatively large hydrogel beads (d/L=0.2) in a Simple Cubic Packing configuration. We study the influence of a spatially non-uniform, sinusoidally varying, wall temperature on the local flow and heat transfer...
journal article 2020
document
Ataei Dadavi, I. (author), Chakkingal, M. (author), Kenjeres, S. (author), Kleijn, C.R. (author), Tummers, M.J. (author)
This paper reports on an experimental study of mixed convection flow and heat transfer in a vented, differentially side-heated cubical cavity filled with a porous medium consisting of relatively large solid low-conductivity spheres. Rayleigh numbers and Reynolds numbers are varied over the ranges 6 × 10<sup>6</sup> &lt; Ra &lt; 7 × 10<sup>7<...
journal article 2020
document
Ataei Dadavi, I. (author), Chakkingal, M. (author), Kenjeres, S. (author), Kleijn, C.R. (author), Tummers, M.J. (author)
This paper reports on an experimental study of natural convection in an enclosure that is heated at the bottom and cooled at the top, filled with a packed bed of relatively large solid spheres. Nusselt numbers were measured for various sphere conductivities, spheres sizes and sphere packings for Rayleigh numbers varying between 10<sup>7</sup>...
journal article 2019
document
Chakkingal, M. (author), Kenjeres, S. (author), Ataei Dadavi, I. (author), Tummers, M.J. (author), Kleijn, C.R. (author)
We report numerical simulations of fluid natural convection with conjugate heat transfer in a bottom-heated, top-cooled cubical cavity packed with relatively large (d/L=0.2) solid spheres in a Body Centred Tetragonal (BCT) configuration. We study largely varying solid-to-fluid thermal conductivity ratios between 0.3 and 198, for a fluid...
journal article 2019
document
Ataei Dadavi, I. (author), Rounaghi, Nima (author), Chakkingal, M. (author), Kenjeres, S. (author), Kleijn, C.R. (author), Tummers, M.J. (author)
Flow and heat transfer in a differentially side heated cubic cavity filled with relatively large solid spheres forming a coarse porous medium have been studied experimentally. Nusselt numbers were measured for Rayleigh numbers between 1.9 × 10<sup>7</sup> and 1.7 × 10<sup>9</sup>, solid-to-fluid conductivity ratios between 0.32 and 618, and...
journal article 2019
document
Contreras, P. S. (author), Ataei Dadavi, I. (author), Speetjens, M. F.M. (author), Kleijn, C.R. (author), Tummers, M.J. (author), Clercx, H. J.H. (author)
The present study concerns Lagrangian transport and (chaotic) advection in three-dimensional (3D) flows in cavities under steady and laminar conditions. The main goal is to investigate topological equivalences between flow classes driven by different forcing; streamline patterns and their response to nonlinear effects are examined. To this...
journal article 2019
Searched for: author%3A%22Ataei+Dadavi%2C+I.%22
(1 - 9 of 9)