Searched for: author%3A%22Benedictus%2C+R.%22
(1 - 20 of 93)

Pages

document
Xiao, Y. (author), Rans, C.D. (author), Zarouchas, D. (author), Benedictus, R. (author)
Embedding fiber optic sensors (FOSs) within parts for strain measurement is attracting widespread interest due to its great potential in the field of structural health monitoring (SHM). This work proposes a novel method of embedding FOSs using capillaries within solid structures and investigates fiber positions and orientation uncertainties...
journal article 2023
document
Moradi, M. (author), Broer, Agnes A.R. (author), Chiachío, Juan (author), Benedictus, R. (author), Loutas, Theodoros H. (author), Zarouchas, D. (author)
A health indicator (HI) is a valuable index demonstrating the health level of an engineering system or structure, which is a direct intermediate connection between raw signals collected by structural health monitoring (SHM) methods and prognostic models for remaining useful life estimation. An appropriate HI should conform to prognostic...
journal article 2023
document
Zheng, T. (author), Guo, Licheng (author), Sun, Ruijian (author), Wang, Tongtong (author), Hong, Changqing (author), Benedictus, R. (author), Pascoe, J.A. (author)
In this paper, the effect of interface properties on the compressive failure behavior of 3D woven composites (3DWC) is investigated by incorporating a micromechanics-based multiscale damage model (MMDM). The correlation between the mesoscopic stress of yarns and microscopic stress of constituents is established by defining a stress...
journal article 2023
document
Li, X. (author), Benedictus, R. (author), Zarouchas, D. (author)
The present work aims at understanding the stochastic matrix crack evolution in CFRP cross-ply laminates under tension–tension fatigue loading. An experimental campaign was carried out on twenty-three specimens at different stress levels, while two optical techniques were used for the in-situ monitoring of the accumulation of transverse...
journal article 2023
document
Jongbloed, B.C.P. (author), Vinod, R. (author), Teuwen, Julie J.E. (author), Benedictus, R. (author), Villegas, I.F. (author)
Continuous ultrasonic welding is a promising high-speed and energy-efficient joining technique for thermoplastic composite structures. However, in the current state-of-the-art research on the topic numerous deconsolidation voids could be identified at the welding interface, which results in a strength knock-down. The aim of this study is,...
journal article 2022
document
Broer, Agnes A.R. (author), Benedictus, R. (author), Zarouchas, D. (author)
With the increased use of composites in aircraft, many new successful contributions to the advancement of the structural health monitoring (SHM) field for composite aerospace structures have been achieved. Yet its application is still not often seen in operational conditions in the aircraft industry, mostly due to a gap between research focus...
journal article 2022
document
De Breuker, R. (author), Benedictus, R. (author), Bisagni, C. (author), Boneschansker, I. (author), Melkert, J.A. (author), Snellen, M. (author), Veldhuis, L.L.M. (author), Verdegaal, F.M. (author), Visser, P.N.A.M. (author), Werij, H.G.C. (author)
The Faculty of Aerospace Engineering is one of eight faculties at Delft University of Technology. It is one of the most comprehensive academic and innovation communities worldwide focusing on aerospace engineering. Its 120 professors and 70 researchers are mentoring and teaching around 2,800 BSc/MSc students and more than 350 PhD candidates...
journal article 2022
document
Wang, X. (author), Benedictus, R. (author), Groves, R.M. (author)
Nanoparticle (NP) doping of optical fibres can be used to increase the intensity of the backscattered light used for distributed strain sensing and has shown the advantages of high precision strain detection and multiplex sensing experimentally. However, the backscatter spectral characteristics of NP-doped optical fibres have not been described...
journal article 2022
document
Zheng, T. (author), Guo, Licheng (author), Benedictus, R. (author), Pascoe, J.A. (author)
A novel micromechanics-based multiscale progressive damage model, employing minimal material parameters, is proposed in this paper to simulate the compressive failure behaviours of 3D woven composites (3DWC). The highly realistic constructions of microscopic and mesoscopic representative volume cells are accomplished, and a set of strain...
journal article 2022
document
Nazeer, N. (author), Groves, R.M. (author), Benedictus, R. (author)
In this paper, with the final aim of shape sensing for a morphing aircraft wing section, a developed multimodal shape sensing system is analysed. We utilise the method of interrogating a morphing wing section based on the principles of both hybrid interferometry and Fibre Bragg Grating (FBG) spectral sensing described in our previous work....
journal article 2022
document
Li, X. (author), Benedictus, R. (author), Zarouchas, D. (author)
Ply-block size and stress level effect on accumulation of transverse cracks and delamination are investigated during early fatigue life of CFRP laminates. Tension-tension fatigue tests under different stress levels were performed for two cross-ply configurations. Edge observation with digital cameras, digital image correlation and acoustic...
journal article 2022
document
Wang, X. (author), Benedictus, R. (author), Groves, R.M. (author)
Strain-based structural health monitoring (SHM) relies on high performance strain sensing methods. Gold nanoparticle (NP) doped fibre optic sensors not only have the potential to increase the intensity of the backscattered signal to increase the signal to noise ratio but also have plasmon resonance peaks in the visible light range. The...
journal article 2022
document
Zheng, T. (author), Guo, Licheng (author), Wang, Zhenxin (author), Benedictus, R. (author), Pascoe, J.A. (author)
In this paper, a reliable progressive fatigue damage model (PFDM) for predicting the fatigue life of composite laminates is proposed by combining the normalized fatigue life model, nonlinear residual degradation models and fatigue-improved Puck criterion. To balance the accuracy of life predictions and computational efficiency, an adaptive...
journal article 2022
document
de Zeeuw, C.M. (author), Peeters, D.M.J. (author), Bergsma, O.K. (author), Benedictus, R. (author)
For pick-and-place processes to become widely implemented in industry a consistent and acceptable product quality needs to be achieved. In the state of the art it is assumed that reinforcements will be in perfect condition at the start of forming or draping. In reality the handling process can already result in undesired deformations. The...
journal article 2022
document
van Kuijk, J.J.A. (author), Alderliesten, R.C. (author), Benedictus, R. (author)
An important figure was omitted from this article, as Fig. 11 was repeated in Fig. 12. The image below shows the correct version of Fig. 12 that should have appeared in the article. [Figure presented]
journal article 2021
document
Wang, X. (author), Benedictus, R. (author), Groves, R.M. (author)
Optical fibre backscatter reflectometry is an important technique for Structural Health Monitoring (SHM). In recent years, increasing the intensity of backscattered light in backscatter reflectometry has shown the advantage of improving the signal detection in shape sensing and temperature detection due to the increase of signal to noise...
journal article 2021
document
Li, X. (author), Saeedifar, M. (author), Benedictus, R. (author), Zarouchas, D. (author)
This paper investigates the loading rate effect on both mechanical properties and damage accumulation process of [0°2/90°4]S carbon fiber-polymer laminates under tensile loading. In-situ edge observations, Acoustic Emission and Digital Image Correlation techniques were utilized simultaneously to monitor the state of damage in real time. Results...
journal article 2021
document
Jongbloed, B.C.P. (author), Teuwen, Julie J.E. (author), Benedictus, R. (author), Villegas, I.F. (author)
Continuous ultrasonic welding is a promising technique for joining thermoplastic composites structures together. The aim of this study was to gain further insight into what causes higher through-the-thickness heating in continuous ultrasonic welding of thermoplastic composites as compared to the static process. Thermocouples were used to measure...
journal article 2021
document
Broer, Agnes A.R. (author), Galanopoulos, Georgios (author), Benedictus, R. (author), Loutas, Theodoros (author), Zarouchas, D. (author)
Conducting damage diagnostics on stiffened panels is commonly performed using a single SHM technique. However, each SHM technique has both its strengths and limitations. Rather than straining the expansion of single SHM techniques going beyond their intrinsic capacities, these strengths and limitations should instead be considered in their...
journal article 2021
document
Anand, C. (author), Groves, R.M. (author), Benedictus, R. (author)
There has been an increase in the use of ultrasonic arrays for the detection of defects in composite structures used in the aerospace industry. The response of a defect embedded in such a medium is influenced by the inherent anisotropy of the bounding medium and the layering of the bounding medium and hence poses challenges for the...
journal article 2021
Searched for: author%3A%22Benedictus%2C+R.%22
(1 - 20 of 93)

Pages