Enhancing the fracture toughness of carbon fibre/epoxy composites by interleaving hybrid meltable/non-meltable thermoplastic veils

Interlaying thermoplastic veils into carbon fibre/epoxy composites has proved to significantly increase the interlaminar fracture toughness. The main toughening mechanism is thermoplastic fibre bridging for the non-meltable veils and matrix toughening for the meltable veils. Herein, to take advantage of different toughening mechanisms, hybrid...

Co-cure joining of epoxy composites with rapidly UV-irradiated PEEK and PPS composites to achieve high structural integrity

Efficient joining of hybrid thermoset/thermoplastic composite joints is critical to produce high performance lightweight structures while keeping the cost low. Herein, a high-power UV-irradiation technique was proposed to rapidly active the surfaces of PEEK and PPS composites for the following co-cure joining with epoxy composites. A single...

Significantly enhanced structural integrity of adhesively bonded PPS and PEEK composite joints by rapidly UV-irradiating the substrates

A high-power UV-irradiation technique was proposed for the surface treatment of PPS and PEEK composites, aiming to achieve good adhesion with epoxy adhesives. The composite substrates were rapidly UV-irradiated for a duration of between 2–30s, and then bonded using an aerospace film adhesive to produce joints. Tensile lap-shear strength and...

The influence of interlayer/epoxy adhesion on the mode-I and mode-II fracture response of carbon fibre/epoxy composites interleaved with thermoplastic veils

The compatibility between the majority of thermoplastic veils (TPVs) and epoxies is typically poor, owing to the inherently low surface energies of thermoplastics. This tends to largely affect the toughening performance of TPVs as interlayer materials of carbon fibre/epoxy composites. The traditional methods for surface activation of...