Searched for: author%3A%22Brouwer%2C+J.C.%22
(1 - 20 of 22)

Pages

document
Ding, Z. (author), Brouwer, J.C. (author), Kwakernaak, C. (author), Hermans, M.J.M. (author), Popovich, V. (author), Quadakkers, Willem J. (author), Sloof, W.G. (author)
Mo(Al<sub>x</sub>Si<sub>1-x</sub>)<sub>2</sub> alloy with x in the range of 0.35–0.65 were prepared by a one-step spark plasma sintering. To study the exclusive formation of an α-Al<sub>2</sub>O<sub>3</sub> scale, oxidation experiments were conducted in low and high oxygen partial pressure ambient at 1373 K; viz.: 10<sup>−14</sup> and 0.21...
journal article 2023
document
Ding, Z. (author), Brouwer, J.C. (author), Kwakernaak, C. (author), Zhu, Jia-Ning (author), Popovich, V. (author), Hermans, M.J.M. (author), Sloof, W.G. (author)
To prevent premature triggering of the healing reaction in Mo-Si containing self-healing thermal barrier coating system, an oxygen impenetrable shell (α-Al<sub>2</sub>O<sub>3</sub>) around the sacrificial healing particles (MoSi<sub>2</sub>) is desired. Here an encapsulation method is presented through selective oxidation of Al in Mo(Al<sub>x...
journal article 2023
document
Ding, Z. (author), Brouwer, J.C. (author), Zhu, Jia-Ning (author), Popovich, V. (author), Hermans, M.J.M. (author), Sloof, W.G. (author)
Boron containing MoSi<sub>2</sub> is a promising material for applications at high temperature, but the oxidation mechanism is still unclear. In this work, the high temperature (1100 °C) oxidation of B doped MoSi<sub>2</sub> in synthetic air has been investigated. A (boro)silicate layer is formed on the surface of the alloy, which features a...
journal article 2023
document
Aghaeian, S. (author), Brouwer, J.C. (author), Sloof, W.G. (author), Mol, J.M.C. (author), Bottger, A.J. (author)
Since the oxidation reactions in the process of steel production occur in harsh conditions (i.e., high temperatures and gas atmospheres), it is practically impossible to observe in situ the compositional changes in the steel and the formed oxide scale. Hence, a coupled thermodynamic-kinetic numerical model is developed that predicts the...
journal article 2023
document
Bhootpur, N. (author), Brouwer, J.C. (author), Tang, Y. (author)
In the past decades, Zirconia (ZrO<sub>2</sub>) has emerged as a promising technical ceramic, both as high temperature structural material and electrolyte for fuel cells, etc. The traditional synthesis of ZrO<sub>2</sub> with spark plasma sintering (SPS) usually requires a sintering temperature as high as 1200 °C. General interest in lowering...
journal article 2023
document
Zhu, Jia-Ning (author), Ding, Z. (author), Borisov, Evgenii (author), Yao, Xiyu (author), Brouwer, J.C. (author), Popovich, Anatoly (author), Hermans, M.J.M. (author), Popovich, V. (author)
The pursuit of enhancing NiTi superelasticity through laser powder bed fusion (L-PBF) and [001] texture creation poses a challenge due to increased susceptibility to hot cracking in the resulting microstructure with columnar grains. This limitation restricts NiTi's application and contributes to material waste. To overcome this, we introduce...
journal article 2023
document
Tuluk, A. (author), Brouwer, J.C. (author), van der Zwaag, S. (author)
BiFeO <sub>3</sub> is a multiferroic material with a perovskite structure that has a lot of potential for use in sensors and transducers. However, obtaining pure single-phase BiFeO <sub>3</sub> ceramic with a low electrical conductivity via solid-state reactions remains a problem that limits its application. In this work, the suppression of...
journal article 2022
document
You, Y. (author), Kim, Jungki (author), Kwakernaak, C. (author), Brouwer, J.C. (author), Westerwaal, Ruud (author), Sloof, W.G. (author)
The surface oxidation and wettability of Mn and Si-alloyed steel after annealing at different conditions are studied with scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and a so-called de-wetting method. After exposure at 950 °C for 1 hour in an Ar + 5 vol pct H<sub>2</sub> gas atmosphere with dew points (DP)...
journal article 2022
document
Fu, Y. (author), Kwakernaak, C. (author), Brouwer, J.C. (author), Sloof, W.G. (author), Brück, E.H. (author), van der Zwaag, S. (author), van Dijk, N.H. (author)
Abstract: The precipitation of supersaturated solutes at free surfaces in ternary Fe–3Au–4W and binary Fe–3Au and Fe–4W alloys (composition in weight percentage) for different ageing times was investigated at a temperature of 700 °C. The time evolution of the surface precipitation is compared among the three alloys to investigate the...
journal article 2020
document
Zhao, M. (author), Brouwer, J.C. (author), Sloof, W.G. (author), Bottger, A.J. (author)
Ternary alloys have been developed for a wide range of applications and surface segregation of ternary alloys has a decisive impact on their performance. Different from binary alloys, in which surface energy is usually the dominant factor, the interaction between solute elements has a noticeable effect on the surface segregation behavior of...
journal article 2020
document
Fu, J. (author), Brouwer, J.C. (author), Richardson, I.M. (author), Hermans, M.J.M. (author)
Oxide dispersion strengthened (ODS) steels are considered to be one of the candidate structural materials for advanced nuclear applications due to their high elevated-temperature strength, corrosion resistance, and radiation tolerance. Joining of ODS steels by traditional fusion joining techniques is not applicable, because the melting...
conference paper 2020
document
Zhao, M. (author), Brouwer, J.C. (author), Sloof, W.G. (author), Bottger, A.J. (author)
Pd–Cu alloys have been investigated as promising candidates for hydrogen separation membranes. Surface segregation influences the long-term performance of these membranes since their catalytic effect is mainly controlled by the surface composition. In the present research, surface segregation of Pd-40 at.% Cu alloy in vacuum and various gas...
journal article 2020
document
Fu, J. (author), van Slingerland, J. (author), Brouwer, J.C. (author), Bliznuk, Vitaliy (author), Richardson, I.M. (author), Hermans, M.J.M. (author)
Pulsed laser beam welding was used successfully to join the oxide dispersion-strengthened (ODS) Eurofer steel. The joining was conducted with a laser power of 2500 W and a pulsed duration of 4 ms. With the filler material being used, a minor material loss and microvoids were observed in the joint. The microstructure of the fusion zone...
journal article 2020
document
Fu, J. (author), Brouwer, J.C. (author), Hendrikx, R.W.A. (author), Richardson, I.M. (author), Hermans, M.J.M. (author)
The present work deals with oxide dispersion strengthened (ODS) Eurofer steel fabricated by powder metallurgy involving mechanical alloying and spark plasma sintering. A heat treatment route including normalising and tempering was applied to the as-produced steel, based on differential scanning calorimetry (DSC) measurement. The...
journal article 2020
document
Osada, Toshio (author), Watabe, Aiko (author), Yamamoto, Joji (author), Brouwer, J.C. (author), Kwakernaak, C. (author), Ozaki, Shingo (author), van der Zwaag, S. (author), Sloof, W.G. (author)
Bones of humans and animals combine two unique features, namely: they are brittle yet have a very high fracture toughness linked to the tortuosity of the crack path and they have the ability to repeatedly heal local fissures such that full recovery of overall mechanical properties is obtained even if the local bone structure is irreversibly...
journal article 2020
document
Fu, J. (author), Brouwer, J.C. (author), Richardson, I.M. (author), Hermans, M.J.M. (author)
Oxide dispersion strengthened (ODS)Eurofer steel was prepared via mechanical alloying (MA)and spark plasma sintering (SPS). Different combinations of MA and SPS parameters were adopted in order to optimise the fabrication process. The experimental results show that the sample milled for 30 h, sintered at 1373 K at a pressure of 60 MPa has...
journal article 2019
document
Naddaf Dezfuli, S. (author), Brouwer, J.C. (author), Mol, J.M.C. (author), van der Helm, F.C.T. (author), Zhou, J. (author)
Recent studies have shown great potential of Mg matrix composites for biodegradable orthopedic devices. However, the poor structural integrity of these composites, which results in excessive localized corrosion and premature mechanical failure, has hindered their widespread applications. In this research, an in-situ Powder Metallurgy (PM)...
journal article 2018
document
Carabat, A.L. (author), Meijerink, M.J. (author), Brouwer, J.C. (author), Kelder, E.M. (author), van Ommen, J.R. (author), van der Zwaag, S. (author), Sloof, W.G. (author)
A successful sol-gel process to encapsulate molybdenum di-silicide MoSi<sub>2</sub> particles with a closed and thermally stable Al<sub>2</sub>O<sub>3</sub> layer using aluminium tri-sec-butoxide as a precursor is presented. The processing conditions such as precursor selection and temperature were optimized through analysing the interaction...
journal article 2018
document
Boatemaa, L. (author), Brouwer, J.C. (author), van der Zwaag, S. (author), Sloof, W.G. (author)
The effect of particle size on the oxidation kinetics of TiC powders is studied. Different sizes of TiC powder ranging from nanometre to submillimetre sizes are investigated. The samples are heated at different heating rates from room temperature up to 1200 °C in dry synthetic air. The Kissinger method for analysis of non-isothermal oxidation...
journal article 2018
document
Ugur, D. (author), Storm, A.J. (author), Verberk, R. (author), Brouwer, J.C. (author), Sloof, W.G. (author)
An isothermal sensor is developed to quantify the atomic hydrogen flux on a surface, which can be located at any distance from the molecular hydrogen cracking unit. This flux is determined from the measured heat effect due to recombination of atomic hydrogen at the sensor surface. The temperature of the sensor was kept constant at 350°C to keep...
journal article 2012
Searched for: author%3A%22Brouwer%2C+J.C.%22
(1 - 20 of 22)

Pages