- document
- Chen, X. (author) doctoral thesis 2023
- document
-
Zou, Tao (author), Niu, Xinbo (author), Ji, Xingda (author), Chen, X. (author), Tao, Longbin (author)In marine environment, floating photovoltaic (FPV) plants are subjected to wind, wave and current loadings. Waves are the primary source of fatigue damage for FPVs. The climate change may accumulatively affect the wave conditions, which may result in the overestimation or underestimation of fatigue damage. This paper aims to present a...journal article 2023
- document
-
Chen, X. (author), Rivera-arreba, Irene (author), Hofland, Bas (author)Overtopping plumes from wave impact is relevant to coastal defence for overtopping analysis of sea walls, levees, and gates. Improved insight into this phenomenon will further enhance the prediction of wave overtopping and its induced hazard, e.g., erosion, saltwater ingress, and a hindrance to traffic. A series of small-scale experiments have...conference paper 2023
- document
-
Zou, P. (author), Ruiter, N. (author), Uijttewaal, W.S.J. (author), Chen, X. (author), Peters, D.J. (author), Bricker, J.D. (author)Marine biofouling is a major concern in the operational performance of submerged floating tunnels (SFTs). The objective of this research is to investigate the effects of marine fouling (represented by surface roughness) on the hydrodynamic behavior of SFTs, including the hydrodynamic forces on the SFT subject to current-only, wave-only, and...journal article 2023
- document
-
Gregory Chen, X. (author), van der Vaart, A.W. (author)A common task in quality control is to determine a control limit for a product at the time of release that incorporates its risk of degradation over time. Such a limit for a given quality measurement will be based on empirical stability data, the intended shelf life of the product and the stability specification. The task is particularly...journal article 2022
- document
-
Chen, X. (author), Ammu, S.K. (author), Masania, K. (author), Steeneken, P.G. (author), Alijani, F. (author)Levitation offers extreme isolation of mechanical systems from their environment, while enabling unconstrained high-precision translation and rotation of objects. Diamagnetic levitation is one of the most attractive levitation schemes because it allows stable levitation at room temperature without the need for a continuous power supply....journal article 2022
- document
-
Chen, X. (author), Sanchez, T. (author), Conciatori, D. (author), Chaouki, H. (author), Sorelli, L. (author), Selma, B. (author), Chekired, M. (author)This paper presents a new 2D water transport model considering capillary suction to predict the water content evolution in the concrete porosity. The basic formulations of the model are illustrated, and a switching algorithm is introduced to simulated wet-drying effects. Two specific absorption tests are studied to validate this model. The first...conference paper 2021
- document
-
Chen, X. (author)A 3D dynamic numerical model is established for modelling the excavation process for dredging purposes. The interaction between the solid and fluid phases is realized by a specially designed DEM-FVM coupling mechanism, where the fluid-particle interaction forces, the volume fraction information and the particle information are constantly updated...doctoral thesis 2021
- document
-
Qian, Yi’Nan (author), Wang, Yuanshun (author), Fang, Zhenlong (author), Chen, X. (author), Miedema, S.A. (author)A jet pump is used to transport a variety of working media and is especially suitable for dredged soil transporting. In this study, a three-dimensional numerical study of a jet pump that is used for slurry delivery was carried out. The characteristics of the internal flow field of the mixing chamber with different working parameters were...journal article 2021
- document
-
Naghavi Zadeh, S.M. (author), Alijani, F. (author), Chen, X. (author), Dayyani, Iman (author), Yasaee, Mehdi (author), Mirzaali, Mohammad J. (author), Zadpoor, A.A. (author)Mechanical metamaterials are advanced engineering materials that exhibit unusual properties that cannot be found in nature. The elastic properties (i.e., elastic modulus and Poisson's ratio) of mechanical metamaterials can be tuned by changing the geometry of their fundamental unit cells. This allows for the design of metamaterial lattices...journal article 2021
- document
-
Chen, X. (author), Kothari, Nimit (author), Keşkekler, A. (author), Steeneken, P.G. (author), Alijani, F. (author)Diamagnetic levitation offers stable confinement of an object from its environment at zero power, and thus is a promising technique for developing next generation unclamped resonant sensors. In this work, we realize a resonant weighing scale using a graphite plate that is diamagnetically levitating over a checkerboard arrangement of permanent...journal article 2021
- document
-
Chen, X. (author), Tan, X. (author), Berselli, G. (author), Chen, X. (author), Clayton, G. (author), Jeon, S. (author), Karimi, H. R. (author), Katsura, S. (author), Kober, J. (author), Vallery, H. (author)Editorial - Since the official registration of the word “Mechatronics” as a trademark by Yaskawa Electric Corporation in 1971, explosive growth has been observed in mechatronics research and product development activities. Nowadays, mechatronics and mechatronic design methodologies play increasingly important roles in computer, communication,...contribution to periodical 2020
- document
-
Chen, X. (author), Keşkekler, A. (author), Alijani, F. (author), Steeneken, P.G. (author)Diamagnetic levitation is a promising technique for realizing resonant sensors and energy harvesters since it offers thermal and mechanical isolation from the environment at zero power. To advance the application of diamagnetically levitating resonators, it is important to characterize their dynamics in the presence of both magnetic and...journal article 2020
- document
-
Echaroj, Snunkhaem (author), Ong, Hwai Chyuan (author), Chen, X. (author)Bioethanol synthesis techniques have been studied intensively due to the energy crisis and various environmental concerns. A two-step bioethanol production process was carried out multiple times in an unbaffled agitator tank. The parameters varied, including the fermentation temperature, the pH level, the amount of yeast, and the impeller type....journal article 2020
- document
-
Chen, X (author), Osorio, C. (author), Santos, Bruno F. (author)This paper addresses a travel time reliable signal control problem. Travel time distributional estimates are obtained from a stochastic microscopic traffic simulator. The estimates are embedded within a simulation-based optimization algorithm. Analytical approximations of the simulated metrics are combined with the simulated data in order to...journal article 2019
- document
-
Heller, Valentin (author), Chen, Fan (author), Brühl, Markus (author), Gabl, Roman (author), Chen, X. (author), Wolters, Guido (author), Fuchs, Helge (author)Mass balance analysis of ice sheets is a key component to understand the effects of global warming. A significant component of ice sheet and shelf mass balance is iceberg calving, which can generate large tsunamis endangering human beings and coastal infrastructure. Such iceberg-tsunamis have reached amplitudes of 50 m and destroyed harbours....journal article 2019
- document
-
Streicher, Maximilian (author), Kortenhaus, Andreas (author), Altomare, Corrado (author), Hughes, Steven (author), Marinov, Krasimir (author), Hofland, B. (author), Chen, X. (author), Suzuki, T. (author), Cappietti, Lorenzo (author)Overtopping bore impact forces on a dike mounted vertical wall were measured in similar large-scale (Froude length scale factor 1-to-4.3) and small-scale (Froude length scale factor 1-to-25) models. The differences due to scale effects were studied, by comparing the up-scaled force measurements from both models in prototype. It was noted that if...conference paper 2019
- document
-
Chen, X. (author), Hofland, B. (author), Molenaar, W.F. (author), Capel, Alex (author), Van Gent, Marcel R.A. (author)This paper describes a method of determining the reaction forces of a vertical structure with an overhang to impulsive wave impacts. The aim is to develop a method to design a hydraulic structure exposed to the impulsive wave impact. At present, there is a lack of guidelines on the designing and verification with such a purpose. The impulse...journal article 2019
- document
-
Chen, X (author), Yang, Y. (author), Evangeliou, P. (author), Van Der Ham, H. (author)As the bridge stock in The Netherlands and Europe is ageing, various methods to analyse the capacity of existing bridges are being studied. Proof load testing is one of the method to test the capacity of bridges by applying loads on the existing concrete bridges with small spans. Because of the fact that neither the actual traffic load nor the...conference paper 2019
- document
-
Xiong, T. (author), Xinzhuo, Zhang (author), Miedema, S.A. (author), Chen, X. (author)Slurry transport is a very important means of transporting solids through a pipeline. To improve the efficiency of slurry transport, especially in coarse particle transport, which is subject to problems such as strong resistance and easy blockage, more of the internal structure of the flow must be known. Empirical and analytical models are...journal article 2019