Searched for: author:"De Boer, A."
(1 - 20 of 60)

Pages

document
Lantsoght, E.O.L. (author), Yang, Y. (author), van der Veen, C. (author), Hordijk, D.A. (author), de Boer, A (author)
Existing bridges with large uncertainties can be assessed with a proof load test. In a proof load test, a load representative of the factored live load is applied to the bridge at the critical position. If the bridge can carry this load without distress, the proof load test shows experimentally that the bridge fulfills the requirements of the...
journal article 2019
document
Ensink, S.W.H. (author), van der Veen, C. (author), Hordijk, D.A. (author), Lantsoght, E.O.L. (author), van der Ham, Herbert (author), de Boer, A. (author)
In the Netherlands, approximately 150 prestressed T-beam bridges with cast-in-between decks and mainly built in the sixties are still in service. Upon assessment, the prestressed beams often do not fulfil the design codes requirements, whereas upon inspection, they show no signs of distress. For the assessment, additional load transfer...
conference paper 2018
document
Lantsoght, E.O.L. (author), van der Veen, C. (author), de Boer, A (author)
The loads that are used for the assessment of existing reinforced concrete slab bridges are the self-weight, superimposed loads, and distributed and concentrated live loads. As such, the shear capacity of reinforced concrete slabs under a combination of distributed and concentrated live loads is a topic of practical relevance. For slabs...
journal article 2017
document
Lantsoght, E.O.L. (author), Koekkoek, R.T. (author), Hordijk, D.A. (author), de Boer, A. (author)
Proof load tests of bridges can be very useful for structures with a lack of information, or for structures of which the effect of material degradation is difficult to assess. Contrary to diagnostic load testing, proof load testing is not well-defined in current standards in terms of required load and analysis of measurements. The risk...
journal article 2017
document
Lantsoght, E.O.L. (author), Yang, Y. (author), van der Veen, C. (author), de Boer, A. (author), Hordijk, D.A. (author)
Loading protocols and acceptance criteria are available in the literature for load tests on buildings. For bridges, proof load tests are interesting when crucial information about the structure is missing, or when the uncertainties about the structural response are large. The acceptance criteria can then be applied to evaluate if further loading...
journal article 2017
document
Lantsoght, E.O.L. (author), Koekkoek, R.T. (author), Yang, Y. (author), van der Veen, C. (author), de Boer, A. (author), Hordijk, D.A. (author)
Proof load testing can be a suitable method to show that a bridge can carry the required loads from the code without distress. This paper addresses the preparation, execution, and analysis of a proof load test on a four-span reinforced concrete solid slab bridge, viaduct de Beek. The bridge has one lane in each direction, but was restricted to a...
conference paper 2017
document
Lantsoght, E.O.L. (author), Koekkoek, R.T. (author), van der Veen, C. (author), Hordijk, D.A. (author), de Boer, A. (author)
For existing bridges, proof-load testing can be a suitable assessment method. This paper addresses the evaluation of a posted reinforced concrete slab bridge over a highway through proof-load testing, detailing the preparation, execution, and analysis of the test. As the target proof-load and the required measurements for proof-load testing...
journal article 2017
document
Lantsoght, E.O.L. (author), van der Veen, C. (author), de Boer, A. (author)
Most methods for the design and analysis of reinforced concrete slabs for punching are based on experiments on slab-column connections, reflecting the situation in building slabs. Slab-column connections with unbalanced<br/>moments have also been studied in the past. Experiments indicate that the accuracy of models for asymmetrically loaded...
conference paper 2017
document
Lantsoght, E.O.L. (author), van der Veen, C. (author), de Boer, A. (author), Hordijk, D.A. (author)
Load testing of bridges is a practice that is as old as their construction. In the past, load testing gave the traveling public a feeling that a newly opened bridge is safe. Nowadays, the bridge stock in many countries is aging, and load testing is used for the assessment of existing bridges. This paper aims at giving an overview of the current...
journal article 2017
document
Lantsoght, E.O.L. (author), van der Veen, C. (author), de Boer, A. (author), Hordijk, D.A. (author)
Proof load testing is part of the engineering practice, and can be particularly useful for the rating of existing bridges. This paper addresses how reliability-based concepts can be used in combination with proof load testing, and discusses how this approach differs from the current practice for proof load testing. Whereas the calculation...
journal article 2017
document
Lantsoght, E.O.L. (author), van der Veen, C. (author), de Boer, A. (author)
Proof loading of existing bridges is an option to study the capacity when crucial information about the structure is lacking. To define the loading criteria for proof load testing, a review of the literature has been made, finite element models of existing viaducts have been made, and on these viaducts, proof loading tests have been carried out....
conference paper 2017
document
Lantsoght, E.O.L. (author), de Boer, A. (author), van der Veen, C. (author)
Existing reinforced concrete solid slab bridges in the Netherlands are re-assessed for shear based on a Unity Check: the ratio of the shear stress caused by the applied loads to the shear capacity of the concrete cross-section. The governing shear stress resulting from the self-weight, weight of the wearing surface, distributed and concentrated...
journal article 2017
document
Lantsoght, E.O.L. (author), van der Veen, C. (author), Hordijk, D.A. (author), de Boer, A. (author)
As the bridge stock in the Netherlands and Europe is ageing, various methods to analyze existing bridges are being studied. Proof load testing of bridges is an option to experimentally demonstrate that a given bridge can carry the prescribed live loads. Based on extensive research on proof load testing of reinforced concrete slab bridges carried...
journal article 2017
document
Lantsoght, E.O.L. (author), Yang, Y. (author), van der Veen, C. (author), de Boer, A (author), Hordijk, D.A. (author)
A large number of existing reinforced concrete solid slab bridges in the Netherlands are found to be insufficient for shear upon assessment. However, research has shown additional sources of capacity in slab bridges, increasing their total capacity. Previous testing was limited to half-scale slab specimens cast in the laboratory. To study the...
journal article 2016
document
Lantsoght, E.O.L. (author), van der Veen, C. (author), de Boer, A (author), Walraven, J.C. (author)
Reinforced concrete short-span solid-slab bridges are used to compare Dutch and North American practices. As an assessment of existing solid-slab bridges in the Netherlands showed that the shear capacity is often governing, this paper provides a comparison between Aashto (American Association of State Highway and Transportation Officials)...
journal article 2016
document
Lantsoght, E.O.L. (author), Yang, Y. (author), Tersteeg, R.H.D. (author), van der Veen, C. (author), de Boer, A (author)
Proof loading of bridges is an option to study existing bridges when crucial information is lacking. When proof loading is chosen, the question arises which maximum load should be attained during the test to demonstrate sufficient capacity, and which criteria, the “stop criteria”, based on the measurements during the test, would indicate that...
conference paper 2016
document
Lantsoght, E.O.L. (author), van der Veen, C. (author), Walraven, J.C. (author), de Boer, A. (author)
A 55-year-old bridge showed large cracking in the approach bridge caused by restraint of deformation and support settlement. After repair, it was uncertain at which crack width the traffic loads on the bridge should be further restricted. The shear capacity was calculated by counting on the aggregate interlock capacity of a supposedly fully...
journal article 2016
document
Lantsoght, E.O.L. (author), van der Veen, C. (author), de Boer, A (author), Hordijk, D.A. (author)
In the Netherlands, the shear capacity of a large number of existing reinforced concrete solid slab bridges is subject to discussion, as initial assessments indicated that their capacity was insufficient. In certain cases, the deterministic value of the moment capacity is larger than the deterministic value of the shear capacity. However, when...
journal article 2016
document
Lantsoght, E.O.L. (author), van der Veen, C. (author), de Boer, A (author), Hordijk, D.A. (author)
A large number of existing reinforced concrete solid slab bridges in the Netherlands are found to be insufficient for shear upon assessment. However, research has shown additional sources of capacity in slab bridges, increasing their total capacity and possibly changing their failure mode. Previous testing was limited to half-scale slab...
journal article 2016
document
Lantsoght, E.O.L. (author), van der Veen, C. (author), de Boer, A (author)
In August 2014, the Ruytenschildt Bridge, a reinforced concrete solid slab bridge, in Friesland, the Netherlands was tested until failure. One of the goals of the experiment is to analyze the failure mode of the slab bridge under a tandem of 4 wheel loads and to compare the capacity of the full bridge structure to the predicted results, to have...
conference paper 2016
Searched for: author:"De Boer, A."
(1 - 20 of 60)

Pages