Searched for: author%3A%22Dong%2C+J.%22
(1 - 20 of 118)

Pages

document
Du, Yunlu (author), Huang, Yunkai (author), Guo, Baocheng (author), Djelloul-Khedda, Zakarya (author), Peng, Fei (author), Yao, Y. (author), Dong, J. (author)
In this article, a nonlinear semianalytical model (SAM) is presented to predict the magnetic field distribution (MFD) and electromagnetic performances (EPs) in the cubic spoke-type permanent magnet (PM) machine. To model the rectangular PMs, the rectangular PM is simplified as a combination of fan-shaped regions with different arc angles....
journal article 2024
document
Dong, J. (author)
Advancements in technology and societal demands have led to increasing complexity, size, and automation in modern industrial systems. This trend makes these systems more safety-critical, as the occurrence of faults in system components or subsystems may cause the entire system to fail, resulting in significant economic losses and casualties....
doctoral thesis 2023
document
Dong, J. (author)
The treatment of largy bone defect remains challenging in clinics. All the clinically available bone grafts have their own limitations and are not ideal for the treatment. Therefore, developing a new generation of suitable bone substitutes is urgently needed. In the recent years, porous magnesium (Mg) has been extensively studied for orthopedic...
doctoral thesis 2023
document
Klop, Casper L. (author), Dong, J. (author), Olsen, Pål Keim (author)
The ModHVDC concept is a modular permanent magnet generator which uses insulated stator segments with dedicated power electronic converters to produce HVDC. This could significantly reduce the number of required power conversion steps for HVDC-connected offshore wind parks. However, the concept poses structural challenges to the machine design,...
conference paper 2023
document
Putra, N.E. (author), Leeflang, M.A. (author), Klimopoulou, M. (author), Dong, J. (author), Taheri, P. (author), Huan, Z. (author), Fratila-Apachitei, E.L. (author), Mol, J.M.C. (author), Chang, J. (author), Zhou, J. (author), Zadpoor, A.A. (author)
The development of biodegradable Fe-based bone implants has rapidly progressed in recent years. Most of the challenges encountered in developing such implants have been tackled individually or in combination using additive manufacturing technologies. Yet not all the challenges have been overcome. Herein, we present porous FeMn-akermanite...
journal article 2023
document
Du, Yunlu (author), Huang, Yunkai (author), Guo, Baocheng (author), Peng, Fei (author), Dong, J. (author)
This article proposes a nonlinear semianalytical model (SAM) of the multiphase Halbach array axial flux permanent-magnet motor (AFPMM) to speed up the computation of its magnetic field. Compared to the existing analytical models, the proposed nonlinear SAM can directly consider magnetic saturation to obtain more accurate results. To this end,...
journal article 2023
document
Du, Yunlu (author), Huang, Yunkai (author), Guo, Baocheng (author), Peng, Fei (author), Yao, Y. (author), Dong, J. (author)
This article proposes a hybrid analytical model (HAM) for predicting ac copper losses in hairpin windings. The HAM combines the nonlinear semi-analytical model (SAM) and the 1-D ac copper loss computation model to solve the inaccurate boundary solutions of the 1-D ac copper loss computation model when magnetic saturation occurs in the stator...
journal article 2023
document
Zhu, G. (author), Dong, J. (author), Grazian, F. (author), Bauer, P. (author)
This article presents a parameter recognition-based impedance tuning method for the impedance mismatch caused by capacitance drift and coil misalignment in series-series-compensated wireless power transfer (WPT) systems. First, a parameter recognition method is proposed to identify the unknown parameters of the resonant circuits by only...
journal article 2023
document
Du, Yunlu (author), Huang, Yunkai (author), Guo, Baocheng (author), Peng, Fei (author), Yao, Yu (author), Dong, J. (author)
In this article, a new analytical model for predicting the magnetic field of the U-shaped interior permanent magnet motor (IPMM) is proposed. In the polar coordinates, rectangular permanent magnets are equivalent to the combination of consistent fan-shaped subdomains, and after that, the Laplace or Poisson equation of each solution domain can...
journal article 2023
document
Yu, G. (author), Dong, J. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
This paper introduces variable-frequency zero voltage switching (ZVS) modulation strategy for the four-switch buck+boost converter with one operating pattern for the inductor current, i.e., three-segment inductor current modulation control. The proposed modulation scheme guarantees a smooth transition from step-up to step-down or from step-down...
conference paper 2023
document
Zhu, G. (author), Dong, J. (author), Bauer, P. (author)
It is ideal for the wireless power transfer (WPT) systems to operate at the resonance state for better transmission performance. In practice, however, the parameters of the resonant circuits often deviate because of the capacitance drift and coil misalignment. To this end, this paper proposes a new parameter estimation method for the WPT systems...
conference paper 2023
document
Yu, G. (author), Ye, P. (author), Grazian, F. (author), Dong, J. (author), Soeiro, Thiago B. (author), Bauer, P. (author)
The pursuit of battery charging technology for electric vehicle (EV) has led to extensive research on the inductive-based wireless power transfer (WPT) systems. In this paper, the compensation component (including coils) stresses will be studied in two commonly adopted compensation topologies, namely S-S and LCC-S compensations. Due to the peak...
conference paper 2023
document
Mitici, M.A. (author), Hennink, Birgitte (author), Pavel, M.D. (author), Dong, J. (author)
The health management of batteries is a key enabler for the adoption of Electric Vertical Take-off and Landing vehicles (eVTOLs). Currently, few studies consider the health management of eVTOL batteries. One distinct characteristic of batteries for eVTOLs is that the discharge rates are significantly larger during take-off and landing, compared...
journal article 2023
document
Dong, J. (author), Sharifi K., Arman (author), Mohajerin Esfahani, P. (author)
We study a diagnosis scheme to reliably detect the active mode of discrete-time, switched affine systems in the presence of measurement noise and asynchronous switching. The proposed scheme consists of two parts: (i) the construction of a bank of filters, and (ii) the introduction of a residual/threshold-based diagnosis rule. We develop an...
journal article 2023
document
Wang, Yi (author), Yang, Zhongping (author), Lin, Fei (author), Dong, J. (author), Bauer, P. (author)
Compensation capacitors are naturally susceptible to manufacturing defects and aging effects, leading to the degraded performance of a wireless power transfer (WPT) system. This article focuses on the compensation parameters optimization during the design stage and control strategy during the operation phase to improve the inherent capacitor...
journal article 2023
document
Du, Yunlu (author), Huang, Yunkai (author), Guo, Baocheng (author), Zhu, Zichong (author), Peng, Fei (author), Dong, J. (author)
In this article, an efficient multi-objective optimization strategy for the Halbach array permanent magnet synchronous machine (PMSM) is developed by taking into consideration the nonlinear B-H behavior of soft magnetic materials. Based on the harmonic modeling (HM) technology, the electromagnetic performances (EPs) of the Halbach array PMSM...
journal article 2023
document
Shi, W. (author), Dong, J. (author), Soeiro, Thiago B. (author), Riekerk, C. (author), Grazian, F. (author), Yu, G. (author), Bauer, P. (author)
Due to the urgent desire for a fast, convenient, and efficient battery charging technology for electric vehicle (EV) users, extensive research has been conducted into the design of high-power inductive power transfer (IPT) systems. However, there are few studies that formulate the design as a multiobjective optimization (MOO) research...
journal article 2022
document
Guo, Baocheng (author), Du, Yunlu (author), Djelloul KHEDDA, Zakarya (author), Peng, Fei (author), Dong, J. (author), Huang, Yunkai (author), Frederic, Dubas (author), Boughrara, Kamel (author)
In this article, we propose a novel nonlinear semianalytical model (AM) for the magnetic field calculation of electric machines. The nonlinear properties and local saturation effect of the iron part are taken into consideration in Cartesian coordinates, which is the main contribution of the proposed model. Thus, high accuracy of...
journal article 2022
document
Yao, Y. (author), Huang, Yunkai (author), Peng, Fei (author), Dong, J. (author), Zhu, Zichong (author)
This article proposes a compensation method of position estimation error for high-speed surface-mounted permanent magnet synchronous motors based on robust inductance estimation. The proposed method relies on the variation of the estimated δ-axis back back-electromotive force when a small current is injected into the γ axis. The inductance...
journal article 2022
document
Cao, Zhi (author), Huang, Yunkai (author), Peng, Fei (author), Dong, J. (author)
Position sensing is one of the crucial parts of the active magnetic bearing (AMB) system. The printed circuit board (PCB) eddy current position sensor is a new type of position sensor for the AMB system, which makes a compact structure, high sensing quality, and is low cost. In this article, an improved driver circuit is proposed for this new...
journal article 2022
Searched for: author%3A%22Dong%2C+J.%22
(1 - 20 of 118)

Pages