document

Nonlinear coarse-graining models for 3D printed multi-material biomimetic composites

Cruz Saldivar, M. (author), Doubrovski, E.L. (author), Mirzaali, Mohammad J. (author), Zadpoor, A.A. (author)

Bio-inspired composites are a great promise for mimicking the extraordinary and highly efficient properties of natural materials. Recent developments in voxel-by-voxel 3D printing have enabled extreme levels of control over the material deposition, yielding complex micro-architected materials. However, design complexity, very large degrees of...

journal article 2022

document

Computational Design for Digitally Fabricated 3D Inductive Power Transfer Coils

Xu, J. (author), Doubrovski, E.L. (author), Geraedts, Jo M.P. (author), Song, Y. (author)

The geometric shapes and the relative position of coils influence the performance of a three-dimensional (3D) inductive power transfer system. In this paper, we propose a coil design method for specifying the positions and the 3D shapes of a pair of coils to transmit the desired power. Given region of interests (ROIs) for designing the...

journal article 2022

document

Personalized product design through digital fabrication

Minnoye, A.L.M. (author), Tajdari, F. (author), Doubrovski, E.L. (author), Wu, J. (author), Kwa, F.S.S. (author), Elkhuizen, W.S. (author), Huysmans, T. (author), Song, Y. (author)

Personalized designs bring added value to the products and the users. Meanwhile, they also pose challenges to the product design process as each product differs. In this paper, with the focus on personalized fit, we present an overview as well as details of the personalized design process based on design practice. The general workflow of...

conference paper 2022

document

Memory-Efficient Modeling and Slicing of Large-Scale Adaptive Lattice Structures

Liu, Shengjun (author), Liu, Tao (author), Zou, Qiang (author), Wang, W. (author), Doubrovski, E.L. (author), Wang, Charlie C.L. (author)

Lattice structures have been widely used in various applications of additive manufacturing due to its superior physical properties. If modeled by triangular meshes, a lattice structure with huge number of struts would consume massive memory. This hinders the use of lattice structures in large-scale applications (e.g., to design the interior...

journal article 2021

document

Knitting 4D garments with elasticity controlled for body motion

Liu, Z. (author), Han, Xingjian (author), Zhang, Yuchen (author), Chen, Xiangjia (author), Lai, Y. (author), Doubrovski, E.L. (author), Whiting, Emily (author), Wang, C.C. (author)

In this paper, we present a new computational pipeline for designing and fabricating 4D garments as knitwear that considers comfort during body movement. This is achieved by careful control of elasticity distribution to reduce uncomfortable pressure and unwanted sliding caused by body motion. We exploit the ability to knit patterns in...

journal article 2021

document

Mechanics of bioinspired functionally graded soft-hard composites made by multi-material 3D printing

Mirzaali Mazandarani, M. (author), Herranz de la Nava, A. (author), Gunashekar, D. (author), Nouri Goushki, M. (author), Veeger, R. P.E. (author), Grossman, Q. (author), Angeloni, L. (author), Ghatkesar, M.K. (author), Fratila-Apachitei, E.L. (author), Ruffoni, D. (author), Doubrovski, E.L. (author), Zadpoor, A.A. (author)

Functional gradients are material transitions that are found in nature and are known to result in materials with superior properties and multiple functionalities. The emerging multi-material 3D printing (=additive manufacturing, AM) techniques provide a powerful tool for the design and fabrication of bioinspired functionally graded materials ...

journal article 2020

document

Multi‐material 3D printing of functionally graded hierarchical soft–hard composites

Mirzaali Mazandarani, M. (author), Cruz Saldivar, M. (author), Herranz de la Nava, Alba (author), Gunashekar, Deepthishre (author), Nouri Goushki, M. (author), Doubrovski, E.L. (author), Zadpoor, A.A. (author)

Hard biological tissues (e.g., nacre and bone) have evolved for millions of years, enabling them to overcome the conflict between different mechanical properties. The key to their success lies in the combination of limited material ingredients (i.e., hard and soft constituents) and mechanistic ingredients (e.g., functional gradients and building...

journal article 2020

document

Bonding between silicones and thermoplastics using 3D printed mechanical interlocking

Rossing, Lars (author), Scharff, R.B.N. (author), Chömpff, Bryan (author), Wang, C.C. (author), Doubrovski, E.L. (author)

Silicones have desirable properties such as skin-safety, high temperature-resistance, and flexibility. Many applications require the presence of a hard body connected to the silicone. Traditionally, it has been difficult to create strong bonding between silicones and hard materials. In this study, a technique is presented to control the...

journal article 2020

document

A Framework for Adaptive Width Control of Dense Contour-Parallel Toolpaths in Fused Deposition Modeling

Kuipers, T. (author), Doubrovski, E.L. (author), Wu, J. (author), Wang, C.C. (author)

3D printing techniques such as Fused Deposition Modeling (FDM) have enabled the fabrication of complex geometry quickly and cheaply. Objects are produced by filling (a portion of) the 2D polygons of consecutive layers with contour-parallel extrusion toolpaths. Uniform width toolpaths consisting of inward offsets from the outline polygons...

journal article 2020

document

Reprintable paste-based materials for additive manufacturing in a circular economy

Sauerwein, M. (author), Zlopasa, J. (author), Doubrovski, E.L. (author), Bakker, C.A. (author), Balkenende, A.R. (author)

The circular economy requires high-value material recovery to enable multiple product lifecycles. This implies the need for additive manufacturing to focus on the development and use of low-impact materials that, after product use, can be reconstituted to their original properties in terms of printability and functionality. We therefore...

journal article 2020

document

Color-Based Proprioception of Soft Actuators Interacting with Objects

Scharff, R.B.N. (author), Doornbusch, Rens M. (author), Doubrovski, E.L. (author), Wu, J. (author), Geraedts, Jo M.P. (author), Wang, C.C. (author)

Actuators using soft materials feature a large number of degrees of freedom. This tremendous flexibility allows a soft actuator to passively adapt its shape to the objects under interaction. In this paper, we propose a novel proprioception method for soft actuators during real-time interaction with previously unknown objects. First, we design...

journal article 2019

document

Exploring the potential of additive manufacturing for product design in a circular economy

Sauerwein, M. (author), Doubrovski, E.L. (author), Balkenende, A.R. (author), Bakker, C.A. (author)

Additive manufacturing, also known as 3D printing, is acknowledged for its potential to support sustainable design. In this paper, we explore whether the opportunities that additive manufacturing offers for sustainable design are also useful when designing for a circular economy, and to what extent additive manufacturing can support design...

journal article 2019

document

Fracture Behavior of Bio-Inspired Functionally Graded Soft–Hard Composites Made by Multi-Material 3D Printing: The Case of Colinear Cracks

Mirzaali, Mohammad J. (author), Herranz de la Nava, Alba (author), Gunashekar, Deepthishre (author), Nouri Goushki, M. (author), Doubrovski, E.L. (author), Zadpoor, A.A. (author)

The functional gradient is a concept often occurring in nature. This concept can be implemented in the design and fabrication of advanced materials with specific functionalities and properties. Functionally graded materials (FGMs) can effectively eliminate the interface problems in extremely hard–soft connections, and, thus, have numerous and...

journal article 2019

document

Digital Manufacturing of Fine Art Reproductions for Appearance

Elkhuizen, W.S. (author), Doubrovski, E.L. (author), van Apeldoorn, N. (author), Essers, T.T.W. (author), Geraedts, Jo M.P. (author)

poster 2018

document

Length-scale dependency of biomimetic hard-soft composites

Mirzaali, Mohammad J. (author), Edens, M. E. (author), de la Nava, A. Herranz (author), Janbaz, S. (author), Vena, P. (author), Doubrovski, E.L. (author), Zadpoor, A.A. (author)

Biomimetic composites are usually made by combining hard and soft phases using, for example, multi-material additive manufacturing (AM). Like other fabrication methods, AM techniques are limited by the resolution of the device, hence, setting a minimum length scale. The effects of this length scale on the performance of hard-soft composites...

journal article 2018

document

Hatching for 3D prints: Line-based halftoning for dual extrusion fused deposition modeling

Kuipers, T. (author), Elkhuizen, W.S. (author), Verlinden, J.C. (author), Doubrovski, E.L. (author)

This work presents a halftoning technique to manufacture 3D objects with the appearance of continuous grayscale imagery for Fused Deposition Modeling (FDM) printers. While droplet-based dithering is a common halftoning technique, this is not applicable to FDM printing, since FDM builds up objects by extruding material in semi-continuous paths....

journal article 2018

document

3D Hatching: Linear halftoning for dual extrusion fused deposition modeling

Kuipers, Tim (author), Doubrovski, E.L. (author), Verlinden, J.C. (author)

This work presents halftoning techniques to manufacture 3D objects with the appearance of full grayscale imagery for Fused Deposition Modeling (FDM) printers. While droplet-based dithering is a common halftoning technique, this is not applicable to FDM printing, since FDM builds up objects by extruding material in semi-continuous paths. A set...

conference paper 2017

document

Design Methodology for Additive Manufacturing: Supporting Designers in the Exploitation of Additive Manufacturing Affordances

Doubrovski, E.L. (author)

doctoral thesis 2016

document

Investigating the links between the process parameters and their influence on the aesthetic evaluation of selective laser melted parts

Galimberti, G. (author), Doubrovski, E.L. (author), Guagliano, M. (author), Previtali, B. (author), Verlinden, J.C. (author)

This study is a precursor to gaining a deeper understanding of how each parameter of the Additive Manufacturing (AM) process influences the aesthetic properties of 3D printed products. Little research has been conducted on this specific aspect of AM. Using insights from the work presented in this paper, we intend to develop design support tools...

conference paper 2016

document

Man machine interface and product embodying such a man machine interface

Bennekom, S.M. (author), Doubrovski, E.L. (author)

patent 2015