Searched for: author%3A%22Guan%2C+Yanhua%22
(1 - 9 of 9)
document
Tawfek, Abdullah M. (author), Ge, Zhi (author), Yuan, Huaqiang (author), Zhang, Ning (author), Zhang, Hongzhi (author), Ling, Yifeng (author), Guan, Yanhua (author), Šavija, B. (author)
The mechanical performance of engineered cementitious composite (ECC) depends greatly on fiber orientation and distribution. In this paper, the effect of fiber orientation on ECC's mechanical properties was investigated using two different casting methods: a flow-induced casting was used to enhance the fiber orientation within ECC mixture and...
journal article 2023
document
Li, Yonghao (author), Zhang, Ning (author), Sun, Renjuan (author), Guan, Yanhua (author), Liu, Lemin (author), Tian, Changjin (author), Ling, Yifeng (author), Zhang, Hongzhi (author), Šavija, B. (author)
The performance of engineered cementitious composites (ECCs) under coupled salt freezing and loaded conditions is important for its application on the transportation infrastructure. However, in most of the studies, the specimens were generally loaded prior to the freezing. The influence of sustained load was merely considered. To this end,...
journal article 2023
document
Sun, Renjuan (author), Bu, Linglai (author), Zhang, Hongzhi (author), Guan, Yanhua (author), Ma, Chuanyi (author), Ge, Zhi (author), Šavija, B. (author)
White mud is a solid waste from the papermaking industry, composed mainly of CaCO<sub>3</sub> and residual alkali metal ions (such as Na+, Mg<sup>2+</sup>). In the current study, the feasibility of using white mud as partial replacement of slag in alkali activated materials is explored. The fluidity, setting time, autogenous shrinkage,...
journal article 2023
document
Wang, Chuan (author), Sun, Renjuan (author), Hu, Xinlei (author), Guan, Yanhua (author), Yang, Yingzi (author), Lu, Wei (author), Tian, Jun (author), Zhang, Hongzhi (author), Ge, Zhi (author), Šavija, B. (author)
This paper presents a research on the chloride penetration behavior of engineered cementitious composites (ECC) under sustained flexural loads. Three load levels, i.e. 30 %, 60 % and 75 % of the ultimate flexural load were used. Chloride diffusion depth and concentration profile were measured 30, 60 and 150 days after the specimen was exposed...
journal article 2023
document
Sun, Renjuan (author), Lu, Wei (author), Tawfek, Abdullah M. (author), Guan, Yanhua (author), Hu, Xinlei (author), Zhang, Hongzhi (author), Ling, Yifeng (author), Šavija, B. (author)
The resistance of cracked ECC against chloride ingress is mainly governed by the accumulated crack width of all the cracks rather than the maximum width of multiple cracks. However, most studies focus on the influence of a single fine crack
journal article 2022
document
Sun, Renjuan (author), Han, Lebing (author), Zhang, Hongzhi (author), Ge, Zhi (author), Guan, Yanhua (author), Ling, Yifeng (author), Schlangen, E. (author), Šavija, B. (author)
This paper presents a study on cracking characterization of engineered cementitious composites (ECC) under flexural cyclic load using digital image correlation (DIC) technique. Five stress levels, namely 0.65, 0.75, 0.8, 0.85 and 0.9 of the flexural strength, were applied. Strain map at the side surface was obtained by DIC and used to drive...
journal article 2022
document
Zhang, Hongzhi (author), He, Yanchen (author), Wang, Chuan (author), Guan, Yanhua (author), Ge, Zhi (author), Sun, Renjuan (author), Ling, Yifeng (author), Šavija, B. (author)
Carbide residue activated blast furnace slag is a relatively new kind of eco-friendly construction materials. This work addresses the design of foamed lightweight concrete as road embankment material using such material. A statistical mixture design approach was adopted to assess the influence of each ingredient as well as the interaction...
journal article 2022
document
Zhang, Hongzhi (author), Shao, Yingxuan (author), Zhang, Ning (author), Tawfek, Abdullah M. (author), Guan, Yanhua (author), Sun, Renjuan (author), Tian, Changjin (author), Šavija, B. (author)
Engineered cementitious composites (ECCs) belong to a broad class of fibre-reinforced concrete. They incorporate synthetic polyvinyl alcohol (PVA) fibres, cement, fly ash and fine aggregates, and are designed to have a tensile strain capacity typically beyond 3%. This paper presents an investigation on the carbonation behaviour of engineered...
journal article 2022
document
Jiang, Nengdong (author), Ge, Zhi (author), Guan, Yanhua (author), Zuo, Zhiwu (author), Zhang, Hongzhi (author), Ling, Yifeng (author), Šavija, B. (author)
This work presents a study of mechanical properties of foamed concrete at the meso-scale based on a combination of X-ray computed tomography (XCT) technique and a discrete lattice type fracture model. The microstructure of the foamed concrete with different densities was obtained by XCT technique and binarized as two-phase (pore/solid) materials...
journal article 2022
Searched for: author%3A%22Guan%2C+Yanhua%22
(1 - 9 of 9)