Searched for: author%3A%22Kanstad%2C+Terje%22
(1 - 12 of 12)
document
Kongshaug, Simen Sørgaard (author), Hendriks, M.A.N. (author), Kanstad, Terje (author), Markeset, Gro (author)
Alkali–silica reaction (ASR) in concrete causes expansion and degradation of the material, which might give adverse structural consequences. From the structural engineer point view, the greatest concern is if ASR leads to loss of structural integrity. Two natural questions arise when assessing existing concrete structures affected by ASR: (1)...
journal article 2022
document
Jadwiga Osmolska, Magdalena (author), Kanstad, Terje (author), Hendriks, M.A.N. (author), Markeset, Gro (author)
Corrosion and shear cracking are frequently observed near supports of pretensioned bridge girders in coastal climates, so non-linear finite element analysis was used to study the effect of corrosion on shear performance in a real case study. Varying degrees of corrosion and various locations (top strands, bottom strands, vertical stirrups and...
journal article 2022
document
Arano Barenys, Assis (author), Colombo, Matteo (author), Martinelli, Paolo (author), Øverli, Jan Arve (author), Hendriks, M.A.N. (author), Kanstad, Terje (author), di Prisco, Marco (author)
This study investigated the effect of fire on the ultimate load-bearing capacity of reinforced concrete (RC) slabs. The structural response of RC circular specimens subjected to static load conditions after exposure to a hydrocarbon fire on one side of the specimen was examined. Two fire exposure times were considered (60 and 120 min) in...
journal article 2022
document
Kongshaug, Simen Sørgaard (author), Larssen, Rolf Magne (author), Hendriks, M.A.N. (author), Kanstad, Terje (author), Markeset, Gro (author)
Material modelling, from the micro to the macro level, of concrete affected by alkali–silica reaction (ASR) has been devoted a lot of research. However, the application of the material models in structural analyses of reinforced concrete (RC) structures, showing the structural implications/consequences of ASR, has got little attention in the...
journal article 2021
document
Arano, Assis (author), Colombo, Matteo (author), Martinelli, Paolo (author), Øverli, Jan Arve (author), Hendriks, M.A.N. (author), Kanstad, Terje (author), Di Prisco, Marco (author)
Advanced numerical modeling of high-strength concrete (fc>60 MPa) structures designed to withstand severe thermal conditions requires detailed and reliable information on the mechanical properties of the material exposed to elevated temperatures. The only uniaxial compressive strength variation with temperature is not enough to satisfy the...
journal article 2021
document
Colombo, Matteo (author), Martinelli, Paolo (author), Arano, Assis (author), Øverli, Jan Arve (author), Hendriks, M.A.N. (author), Kanstad, Terje (author), di Prisco, Marco (author)
Reinforced concrete (RC) submerged floating tunnels (SFTs) represent a possible solution for crossing wide, deep fjords, and is considered for the E39 highway route along the Norwegian west coast. With regard to SFTs, the specific accidental scenario that is under investigation is the combined action of fire and subsequent internal explosion,...
journal article 2021
document
Kongshaug, Simen Sørgaard (author), Oseland, Oddbjørn (author), Kanstad, Terje (author), Hendriks, M.A.N. (author), Rodum, Eva (author), Markeset, Gro (author)
The alkali silica reaction (ASR) in concrete causes internal localized swelling and micro cracking, which result in expansion and correlated deterioration of the concrete material. The stress state of the concrete is known to affect expansion due to ASR, with an anisotropic stress state giving rise to anisotropic expansion. Similarly, the...
journal article 2020
document
Tan, Reignard (author), Hendriks, M.A.N. (author), Geiker, Mette (author), Kanstad, Terje (author)
This paper formulates an analytical calculation model for predicting the cracking behavior of reinforced concrete ties to provide more consistent crack width calculation methods for large-scale concrete structures in which large bar diameters and covers are used. The calculation model was derived based on the physical behavior of reinforced...
journal article 2020
document
Tan, Reignard (author), Hendriks, M.A.N. (author), Geiker, Mette (author), Kanstad, Terje (author)
The cracking behaviours of reinforced-concrete (RC) ties are investigated by conducting virtual experiments using non-linear finite-element analysis. The assumptions in the model are verified by benchmarking the classical experiments of B. Bresler and V. V. Bertero as conducted in 1968 and P. J. Yannopoulos, conducted in 1989, which shows...
journal article 2020
document
Osmolska, Magdalena J. (author), Hornbostel, Karla (author), Kanstad, Terje (author), Hendriks, M.A.N. (author), Markeset, Gro (author)
The most common methods for detecting chloride-induced corrosion in concrete bridges are half-cell potential (HCP) mapping, electrical resistivity (ER) measurements, and chloride concentration testing, combined with visual inspection and cover measurements. However, studies on corrosion detection in pretensioned structures are rare. To...
journal article 2020
document
Osmolska, Magdalena J. (author), Kanstad, Terje (author), Hendriks, M.A.N. (author), Hornbostel, Karla (author), Markeset, Gro (author)
This study was based on findings from the Norwegian Public Roads Administration's Bridge Management System and field investigations on corrosion damage in pretensioned Norwegian standard I-beam (NIB) girders in 227 coastal climate bridges. The main durability design parameters are summarized and related to regulations over the last 80 years....
journal article 2019
document
Tan, Reignard (author), Eileraas, Kristoffer (author), Opkvitne, Ola (author), Žirgulis, Giedrius (author), Hendriks, M.A.N. (author), Geiker, Mette (author), Brekke, Dan Evert (author), Kanstad, Terje (author)
This paper theoretically and experimentally investigates the semi-empirical formulas recommended by Eurocode 2 (EC2), fib Model Code 2010 (MC2010), and Eurocode 2 with the German National Annex (DIN) for calculating crack widths in reinforced concrete. It is shown that the formulas can be derived from the principles for the idealized behavior...
journal article 2018
Searched for: author%3A%22Kanstad%2C+Terje%22
(1 - 12 of 12)