Advances in Time-Resolved Tomographic Particle Image Velocimetry

This thesis details advanced developments in 3-D particle image velocimetry (PIV) based on the tomographic PIV technique, with an emphasis on time-resolved experiments. Tomographic PIV is a technique introduced in 2006 to measure the flow velocity in a three-dimensional volume. When measurements are performed at a rate high enough to sample the...

Determination of instantaneous pressure in a transonic base flow using four-pulse tomographic PIV

A tomographic four-pulse PIV system is used in a transonic axisymmetric base flow experiment at a nominal free stream Mach number of 0.7, with the objective to obtain flow acceleration and pressure data. The PIV system, consisting of two double-pulse lasers and twelve cameras, allows acquiring two velocity fields with time separations as small...

An efficient and accurate approach to MTE-MART for time-resolved tomographic PIV

The motion-tracking-enhanced MART (MTE-MART; Novara et al. in Meas Sci Technol 21:035401, 2010) has demonstrated the potential to increase the accuracy of tomographic PIV by the combined use of a short sequence of non-simultaneous recordings. A clear bottleneck of the MTE-MART technique has been its computational cost. For large datasets...

Aerodynamic and aeroacoustic effects of pylon trailing edge blowing on pusher propeller installation

The effects of swirl recovery vanes on single-rotation propeller aerodynamics and aeroacoustics

An efficient and accurate approach to MTE-MART for time-resolved tomographic PIV

The motion-tracking-enhanced MART (MTE-MART; Novara et al. in Meas Sci Technol 21:035401, 2010) has demonstrated the potential to increase the accuracy of tomographic PIV by the combined use of a short sequence of non-simultaneous recordings. A clear bottleneck of the MTE-MART technique has been its computational cost. For large datasets...

Three-Dimensional Particle Image Velocimetry Using a Plenoptic Camera

A novel 3-D, 3-C PIV technique is described, based on volume illumination and a plenoptic camera to measure a velocity field. The technique is based on plenoptic photography, which uses a dense microlens array mounted near a camera sensor to sample the spatial and angular distribution of light entering the camera. Various algorithms are then...