A − 91 dB THD + N, Class-D Piezoelectric Speaker Driver Using Dual Voltage/Current Feedback for Resistor-Less LC Resonance Damping

This article presents a Class-D audio amplifier for capacitive piezoelectric speaker loads. Employing a dual voltage feedback (VFB)/current feedback (CFB) topology, the amplifier is capable of damping LC resonance without using an external damping resistor, therefore reducing system power consumption, cost, and size. Additional power savings are...

A Fill-In Technique for Robust IMD Suppression in Chopper Amplifiers

In chopper amplifiers, the interaction between the input signal and the chopper clock can give rise to intermodulation distortion (IMD). This chopper-induced IMD is mainly due to amplifier delay, which causes large pulses at the output of the amplifier's output chopper. This article proposes the use of a so-called fill-in technique to eliminate...

A 19.8-mW Eddy-Current Displacement Sensor Interface with Sub-Nanometer Resolution

This paper presents an eddy-current sensor (ECS) interface intended for sub-nanometer (sub-nm) displacement sensing in hi-tech applications. The interface employs a 126-MHz excitation frequency to mitigate the skin effect, and achieve high resolution and stability. An efficient on-chip sensor offset compensation scheme is introduced which...

A 20-bit ±40-mV Range Read-Out IC With 50-nV Offset and 0.04% Gain Error for Bridge Transducers

This paper presents a 20-b read-out IC with ±40-mV full-scale range that is intended for use with bridge transducers. It consists of a current-feedback instrumentation amplifier (CFIA) followed by a switched-capacitor incremental ΔΣ ADC. The CFIA's offset and 1/ <i>f</i> noise are mitigated by chopping, while its gain accuracy and gain drift are...

A chopper current-feedback instrumentation amplifier with a 1 mHz 1/f noise corner and an AC-coupled ripple reduction loop

This paper presents a chopper instrumentation amplifier for interfacing precision thermistor bridges. For high CMRR and DC gain, the amplifier employs a three-stage current-feedback topology with nested-Miller compensation. By chopping both the input and intermediate stages of the amplifier, a 1 mHz 1/f noise corner was achieved at an input...