Searched for: author%3A%22Mol%2C+J.M.C.%22
(1 - 13 of 13)
document
Liu, Tong (author), Chen, Zhuoyao (author), Yang, Jingzhi (author), Ma, Lingwei (author), Mol, J.M.C. (author), Zhang, Dawei (author)
Machine learning is a powerful means for the rapid development of high-performance functional materials. In this study, we presented a machine learning workflow for predicting the corrosion resistance of a self-healing epoxy coating containing ZIF-8@Ca microfillers. The orthogonal Latin square method was used to investigate the effects of the...
journal article 2024
document
Yan, J. (author), Stickel, L.S. (author), van den Hengel, L. (author), Wang, H. (author), Ravi Anusuyadevi, P. (author), Kooijman, A.M. (author), Liu, X. (author), Ibrahim, B. (author), Mol, J.M.C. (author), Taheri, P. (author), Mazzarella, L. (author), Isabella, O. (author), Savenije, T.J. (author)
The preferential orientation of the perovskite (PVK) is typically accomplished by manipulation of the mixed cation/halide composition of the solution used for wet processing. However, for PVKs grown by thermal evaporation, this has been rarely addressed. It is unclear how variation in crystal orientation affects the optoelectronic properties of...
journal article 2023
document
Liu, Tong (author), Zhang, Dawei (author), Zhang, Rongjun (author), Wang, Jinke (author), Ma, Lingwei (author), Keil, Patrick (author), Mol, J.M.C. (author), Li, Xiaogang (author)
Organic coatings are one of the most used and versatile technologies to mitigate corrosion of metals. However, organic coatings are susceptible to defects and damages that may not be easily detected. If not repaired timely, these defects may develop into major coating failures due to corrosion occurring in the damaged region, thereby limiting...
journal article 2023
document
Liu, M. (author), Zhu, Jia-Ning (author), Popovich, V. (author), Borisov, E. (author), Mol, J.M.C. (author), Gonzalez Garcia, Y. (author)
Electrochemical tests and surface analysis measurements were performed to study the corrosion behavior in a 0.9 wt.% NaCl solution at 37 °C of three NiTi shape memory alloys fabricated by laser-powder bed fusion (L-PBF). The passive film characteristics and corrosion resistance of L-PBF NiTi showed different features as a function of their...
journal article 2023
document
Liu, M. (author), Zhu, Jia-Ning (author), Popovich, V. (author), Borisov, E. (author), Mol, J.M.C. (author), Gonzalez Garcia, Y. (author)
Electrochemical tests and surface analysis were applied to study the corrosion behavior and passive film characteristics of three-dimensional-printed NiTi shape memory alloys fabricated by laser-powder bed fusion (L-PBF) in artificial saliva at 37 °C. The passivity of L-PBF NiTi shows to be influenced by the process parameters and resulting...
journal article 2023
document
Liu, Tong (author), Zhang, Dawei (author), Ma, Lingwei (author), Huang, Yao (author), Hao, Xiangping (author), Terryn, H.A. (author), Mol, J.M.C. (author), Li, Xiaogang (author)
Herein, we report the development of a self-sensing and active corrosion protection coating which incorporates pH-sensitive multilayer chitosan/alginate-covered CaCO<sub>3</sub> microcontainers containing 1,10-phenanthrolin-5-amine (APhen). The microcontainers can respond to pH variation to release APhen which serves not only as a corrosion...
review 2022
document
Wu, Dequan (author), Ma, Lingwei (author), Liu, Bei (author), Zhang, Dawei (author), Minhas, Badar (author), Qian, Hongchang (author), Terryn, H.A. (author), Mol, J.M.C. (author)
This study investigated the deterioration of a lubricant-infused anodic aluminium oxide surface in a 1 M NaCl solution for ∼200 days. Direct observation by cryo-SEM and quantitative analyses by UV spectroscopy and EIS revealed that the long-term deterioration of the lubricant-infused surface was divided into two stages: the surface-adhered...
journal article 2021
document
Chen, Guangmeng (author), Wen, Shifeng (author), Ma, Jiacheng (author), Sun, Zhiyong (author), Lin, Cunguo (author), Yue, Zhufeng (author), Mol, J.M.C. (author), Liu, M. (author)
Multifunctional intrinsic self-healing polymers (ISP) are gaining increasing attention these days, and many studies have been devoted to solving the conflict between achieving high mechanical polymer strength and active polymer chain diffusion. In this research, we developed an optimized self-healing composite coating by adding Benzotriazole ...
journal article 2021
document
Zhang, Chunyan (author), Liu, Bin (author), Yu, Baoxing (author), Lu, Xiaopeng (author), Wei, Yong (author), Zhang, Tao (author), Mol, J.M.C. (author), Wang, Fuhui (author)
Surface pretreatment is generally applied before application of protective coatings on Mg alloys, which influences surface microstructure and electrochemical activity of the substrate and has an effect on the coating properties. The effect of various pretreatment processes (sand-blasting, grinding and polishing) on the microstructure and...
journal article 2019
document
Wu, Dequan (author), Zhang, D. (author), Ye, Yuwei (author), Ma, Lingwei (author), Minhas, Badar (author), Liu, Bei (author), Terryn, H.A. (author), Mol, J.M.C. (author), Li, Xiaogang (author)
Recently, lubricant-infused surfaces (LIS) have emerged as a prominent class of surface technology for antifouling, anti-icing and anticorrosion applications. However, long-term corrosion exposure and mechanical damages may deteriorate the practical performance of LIS during application. In this study, a robust LIS was fabricated by the...
journal article 2019
document
Liu, Y. (author), Mol, J.M.C. (author), Janssen, G.C.A.M. (author)
The aluminium alloy 7075-T6 is widely used in engineering. In some applications, like slurry transport, corrosion and abrasion occur simultaneously, resulting in early material failure. In the present work, we investigated the combined effect of corrosion and wear on the aluminium alloy 7075-T6. We performed two series of wear experiments to...
journal article 2016
document
Visser, P (author), Liu, Y (author), Terryn, H.A. (author), Mol, J.M.C. (author)
Lithium salts are being investigated as leachable corrosion inhibitor and potential replacement for hexavalent chromium in organic coatings. Model coatings loaded with lithium carbonate or lithium oxalate demonstrated active corrosion inhibition and the formation of a protective layer in a damaged area during neutral salt spray exposure. The...
journal article 2016
document
Liu, Y. (author), Visser, P. (author), Zhou, X. (author), Lyon, S.B. (author), Hashimoto, T. (author), Curioni, M. (author), Gholinia, A. (author), Thompson, G.E. (author), Smyth, G. (author), Gibbon, S.R. (author), Graham, D. (author), Mol, J.M.C. (author), Terryn, H.A. (author)
An investigation into corrosion inhibition properties of a primer coating containing lithium carbonate as corrosion inhibitive pigment for AA2024 aluminum alloy was conducted. It was found that, during neutral salt spray exposure, a protective film of about 0.2 to 1.5 ?m thickness formed within the area where an artificial defect was introduced...
journal article 2015
Searched for: author%3A%22Mol%2C+J.M.C.%22
(1 - 13 of 13)