Searched for: author%3A%22Mol%2C+J.M.C.%22
(1 - 20 of 24)

Pages

document
Mousavi, M. (author), Mol, J.M.C. (author), Gonzalez Garcia, Y. (author)
abstract 2019
document
Mousavi, M. (author), Mol, J.M.C. (author), Gonzalez Garcia, Y. (author)
abstract 2019
document
De Graeve, I. (author), Muselle, T. (author), Scheltjens, G. (author), Brancart, J. (author), Gonzalez Garcia, Y. (author), Mol, J.M.C. (author), Van Assche, G. (author), Van Mele, B. (author), Terryn, H. (author)
conference paper 2011
document
Haddadi, S. (author), Ramazani, A. (author), Mahdavian, M. (author), Taheri, P. (author), Mol, J.M.C. (author), Gonzalez Garcia, Y. (author)
The ability of an active protective organic coating to restore its protection functionality in case of a coating defect is of pivotal importance to ensure durable performance under demanding corrosive conditions. In this paper, a self-healing epoxy system is fabricated by separate encapsulation of epoxy and polyamine in carbon hollow spheres ...
journal article 2019
document
Kosari, A. (author), Ahmadi, M. (author), Tichelaar, F.D. (author), Visser, P. (author), Gonzalez Garcia, Y. (author), Zandbergen, H.W. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
Cerium-based compounds have been studied for decades as non-toxic candidates for the protection of aerospace aluminium alloys (AAs) like AA2024-T3. However, the complex heterogeneous microstructure of these alloys has hindered a thorough understanding of the subsequent stages of corrosion protection provided by this class of inhibitors. Thus,...
journal article 2021
document
Michailidou, E. (author), Visser, P. (author), Mol, J.M.C. (author), Kosari, A. (author), Terryn, H.A. (author), Baert, K. (author), Gonzalez Garcia, Y. (author)
The corrosion inhibiting effect of lithium carbonate has been studied over the pH range relevant for atmospheric corrosion conditions at the polymer/metal interface. It is demonstrated that lithium carbonate offers optimum corrosion protection under moderately alkaline conditions attributed to the formation of a protective layer identified as...
journal article 2023
document
Visser, P. (author), Meeusen, M. (author), Gonzalez Garcia, Y. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
This work presents the electrochemical evaluation of protective layers generated in a coating defect from lithium-leaching organic coatings on AA2024-T3 aluminum alloys as a function of neutral salt spray exposure time. Electrochemical impedance spectroscopy was used to study the electrochemical properties on a macroscopic scale. An...
journal article 2017
document
Martinez Lombardia, Esther (author), Lapeire, Linsey (author), Maurice, Vincent (author), De Graeve, Iris (author), Klein, Lorena (author), Marcus, Philippe (author), Verbeken, Kim (author), Kestens, L.A.I. (author), Gonzalez Garcia, Y. (author), Mol, J.M.C. (author), Terryn, H.A. (author)
When aiming for an increased and more sustainable use of metals a thorough knowledge of the corrosion phenomenon as function of the local metal microstructure is of crucial importance. In this work, we summarize the information presented in our previous publications[1-3] and present an overview of the different local (electrochemical) techniques...
journal article 2017
document
Visser, P. (author), Gonzalez Garcia, Y. (author), Mol, J.M.C. (author), Terryn, H.A. (author)
This study focuses on the elucidation of the formation mechanism of passive layers on AA2024-T3 during the exposure to alkaline lithium carbonate solutions in the presence of sodium chloride. Under controlled conditions, in an electrochemical cell, a protective layer was generated comprising an amorphous inner layer and a crystalline outer...
journal article 2018
document
Mousavi, M. (author), Kosari, A. (author), Mol, J.M.C. (author), Gonzalez Garcia, Y. (author)
Electroless nickel (Ni) immersion gold (Au), commonly referred to by the acronym ENIG, is the most common protective coating applied on the exposed copper (Cu) traces of printed circuit boards (PCBs). In this work, we elucidate the local corrosion mechanism of the ENIG-Cu system by applying microscopic, surface analysis and electrochemical...
journal article 2022
document
Rahimi, E. (author), Imani, Amin (author), Lekka, Maria (author), Andreatta, Francesco (author), Gonzalez Garcia, Y. (author), Mol, J.M.C. (author), Asselin, Edouard (author), Fedrizzi, Lorenzo (author)
The formation of a protein nanobiofilm on the surface of degradable biomaterials such as magnesium (Mg) and its alloys influences metal ion release, cell adhesion/spreading, and biocompatibility. During the early stage of human body implantation, competition and interaction between inorganic species and protein molecules result in a complex...
journal article 2022
document
van Dam, J.P.B. (author), Abrahami, S.T. (author), Yilmaz, A. (author), Gonzalez Garcia, Y. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
This work focuses on the effect of surface roughness and surface chemistry on the initial adhesion strength and corrosive de-adhesion properties of adhesive bonds. The adherend used in this study is a S690 low-alloy steel whereas the adhesive is a 2-component epoxy-amine adhesive (Araldite 2015). The steel surface is subjected to different...
journal article 2020
document
Fockaert, L.I. (author), Ankora, M.V.E. (author), van Dam, J.P.B. (author), Pletincx, S. (author), Yilmaz, A. (author), Boelen, B. (author), Hauffman, T. (author), Gonzalez Garcia, Y. (author), Terryn, H.A. (author), Mol, J.M.C. (author)
The bonding properties of zirconium- and titanium-based conversion coatings were evaluated using model conversion solutions of H<sub>2</sub>ZrF<sub>6</sub> and H<sub>2</sub>TiF<sub>6</sub> with addition of various organic additives (PAA, PVA, PVP). Macroscopic testing techniques such as contact angle and pull-off adhesion measurements were...
journal article 2020
document
Van den Steen, N. (author), Gonzalez Garcia, Y. (author), Mol, J.M.C. (author), Terryn, H.A. (author), Van Ingelgem, Y. (author)
A new approach is proposed to numerically predict and study atmospheric corrosion for ranging droplet size distributions and the influence of the droplet geometry. The proposed methodology allows for a corrosion prediction based on observed droplet size distributions and droplet contact angles. A mechanistic finite element model, including...
journal article 2022
document
Li, Z. (author), Homborg, A.M. (author), Gonzalez Garcia, Y. (author), Kosari, A. (author), Visser, Peter (author), Mol, J.M.C. (author)
The formation process of a lithium-based conversion layer on AA2024-T3 and its corrosion protective behavior are studied using electrochemical noise (EN). Wavelet transform, as well as noise resistance analysis, have been employed to interpret the EN data. The EN data confirmed five different stages during the conversion layer growth,...
journal article 2022
document
Liu, M. (author), Zhu, Jia-Ning (author), Popovich, V. (author), Borisov, E. (author), Mol, J.M.C. (author), Gonzalez Garcia, Y. (author)
Electrochemical tests and surface analysis measurements were performed to study the corrosion behavior in a 0.9 wt.% NaCl solution at 37 °C of three NiTi shape memory alloys fabricated by laser-powder bed fusion (L-PBF). The passive film characteristics and corrosion resistance of L-PBF NiTi showed different features as a function of their...
journal article 2023
document
Li, Z. (author), Homborg, A.M. (author), Gonzalez Garcia, Y. (author), Visser, Peter (author), Soleimani, M. (author), Mol, J.M.C. (author)
The influence of ageing under ambient conditions on the corrosion protective behaviour of a lithium-based conversion layer on AA2024-T3 is studied in this work. Conversion layers aged at ambient conditions for relatively short times (0 h and 4 h), show an initial high degree of corrosion inhibition but a much lower protectiveness after the...
journal article 2023
document
Imani, Amin (author), Rahimi, E. (author), Lekka, Maria (author), Andreatta, Francesco (author), Magnan, Michele (author), Gonzalez Garcia, Y. (author), Mol, J.M.C. (author), Raman, R. K. Singh (author), Fedrizzi, Lorenzo (author), Asselin, Edouard (author)
Mg and its alloys are promising biodegradable materials for orthopedic implants and cardiovascular stents. The first interactions of protein molecules with Mg alloy surfaces have a substantial impact on their biocompatibility and biodegradation. We investigate the early-stage electrochemical, chemical, morphological, and electrical surface...
journal article 2024
document
Li, Y. (author), Jahr, H. (author), Lietaert, K. (author), Pavanram, P. (author), Yilmaz, A. (author), Fockaert, L.I. (author), Leeflang, M.A. (author), Pouran, B. (author), Gonzalez Garcia, Y. (author), Weinans, Harrie (author), Mol, J.M.C. (author), Zhou, J. (author), Zadpoor, A.A. (author)
Additively manufactured (AM) topologically ordered porous metallic biomaterials with the proper biodegradation profile offer a unique combination of properties ideal for bone regeneration. These include a fully interconnected porous structure, bone-mimicking mechanical properties, and the possibility of fully regenerating bony defects. Most...
journal article 2018
document
Li, Z. (author), Li, G. (author), Visser, Peter (author), Homborg, A.M. (author), Gonzalez Garcia, Y. (author), Mol, J.M.C. (author)
Scanning electrochemical microscopy (SECM) is employed to characterize the evolution of local electrochemical surface activity during lithium-based conversion layer formation on legacy aerospace aluminium alloy AA2024-T3. Initially, three types of studied intermetallic particles - S-, θ- and constituent phases - act as active cathodic areas....
journal article 2023
Searched for: author%3A%22Mol%2C+J.M.C.%22
(1 - 20 of 24)

Pages