Characterisation of bacterial decay effects on wooden foundation piles across various historical periods

In the historic city centre of Amsterdam (NL), the predominant foundation system is comprised of wooden piles. Due to their placement below the water table, these foundations are susceptible to bacterial decay. This study aims to investigate and compare various methods for characterizing decay patterns within the cross sections of piles...

Assessment of in-situ stress distribution and mechanical properties of wooden foundation piles instrumented with distributed fiber optic sensors (DFOS)

This case study explores the utilization of distributed fiber optic sensors (DFOS) in wooden foundation piles, for assessing and monitoring the stress distribution along their length. Three spruce and three pine foundation piles instrumented with DFOS were driven into the soil in a testing field in Amsterdam and axially loaded in compression....

Combining Architectural Conservation and Seismic Strengthening in the Wood-Based Retrofitting of a Monumental Timber Roof: The Case Study of St. Andrew’s Church in Ceto, Brescia, Italy

This work presents the application of timber-based retrofitting techniques to a case-study stone masonry church featuring a wooden roof from 18^th century. From the static point of view, the original roof structure presented a number of undersized structural elements, and its members were poorly or not connected among each other and...

Experimental characterisation of as-built and retrofitted timber-masonry connections under monotonic, cyclic and dynamic loading

In the province of Groningen (NL), where human-induced earthquakes take place due to gas extraction, a large part of the building stock is composed of brick masonry walls and timber diaphragms. In this framework, timber-masonry connections play a crucial role in the global seismic response of the buildings, but their properties and structural...

An analytical model describing the in-plane behaviour of timber diaphragms strengthened with plywood panels

Timber diaphragms in existing buildings are often too flexible in their plane, and can thus potentially cause out-of-plane collapses of walls during earthquakes. A very efficient retrofitting method to increase their in-plane stiffness and energy dissipation is the overlay of plywood panels. However, the usual characterization of the floors by...

Optimizing Seismic Capacity of Existing Masonry Buildings by Retrofitting Timber Floors: Wood-Based Solutions as a Dissipative Alternative to Rigid Concrete Diaphragms

The inadequate seismic performance of existing masonry buildings is often linked to the excessively low in-plane stiffness of timber diaphragms and the poor quality of their connections to the walls. However, relevant past studies and seismic events have also shown that rigid diaphragms could be detrimental for existing buildings and do not...

Comparing In-Plane Equivalent Shear Stiffness of Timber Diaphragms Retrofitted with Light and Reversible Wood-Based Techniques

In-plane behavior of timber diaphragms is usually characterized by means of an equivalent shear stiffness. However, this value depends on how the stiffness of the floors is evaluated from the experimental tests. Although an increasing number of research studies have provided a deeper insight into the seismic characterization of as-built and...

In-plane response of slender walls made of calcium silicate brick and element masonry

Due to the increase of induced seismic activities in the Groningen area (north part of the Netherlands), the assessment of low-rise residential buildings with slender façade piers became of relevance. In this framework, the in-plane response of slender walls made of calcium silicate (CS) brick and element masonry is investigated in this paper...

Experimental investigation of the in-plane cyclic behaviour of calcium silicate brick masonry walls

The material and structural performance of calcium silicate (CS) brick masonry has received relatively little attention in the past, although this material is often used for the construction of low-rise buildings in Central and Northern Europe. Upon the occurrence of induced seismicity in the north of the Netherlands, an extensive testing...

Experimental and analytical evaluation of the in-plane behaviour of as-built and strengthened traditional wooden floors

Traditional timber floors cannot normally withstand horizontal seismic loads without large deformations. This may lead to a corresponding out-of-plane collapse of masonry walls in existing buildings. This situation is even more critical in the Netherlands, around the city of Groningen, where human-induced earthquakes started to take place....

Influence of slope of grain on the mechanical properties of tropical hardwoods and the consequences for grading

The main parameter that influences the bending strength of timber from tropical hardwood is the slope of grain. Although, in the grading rules, a specific threshold value is given, in these hardwoods, the global slope of grain is very difficult to quantify by visual assessment. The slope of grain measured after testing gives a better...

Seismic assessment of a lab-tested two-storey unreinforced masonry Dutch terraced house

The exploitation of geo-resources in the northern part of the Netherlands (Groningen region) is triggering shallow earthquakes, rising the need of assessing the current building stock. Being the region not prone to tectonic earthquakes, buildings are designed as wind-resistant systems and have specific characteristics that can limit their...

Self-extinguishment of cross-laminated timber

Cross-laminated timber, or CLT, is receiving attention for its potential application in tall building structures. As a combustible material, one of the main challenges for the construction of these buildings is the fire risk that results from its use in the structure.<br/><br/>Unprotected CLT can burn along with the fuel load present in a...

The importance of characterisation and sampling of tropical wood species with regard to strength and durability classification

Strength class assignments and durability class assignments of wood species to be used in structures are necessary to make it possible for the engineer to design safe and durable timber structures. As a result of sustainable managed forests, more tropical wood species with relative small batch size, are coming on the market. In Europe, strength...