Searched for: author%3A%22Rubio+Carpio%2C+A.%22
(1 - 15 of 15)
document
Rubio Carpio, A. (author)
Permeable trailing edges are experimentally investigated in this thesis as a mean tomitigate aeroacoustic noise. The first part of the study is devoted to deciphering themechanisms of noise generation involved in these devices. To this aim, trailing-edge inserts are manufactured employing commercially-produced open-cell metallic foams with...
doctoral thesis 2021
document
Merino Martinez, R. (author), Rubio Carpio, A. (author), Lima Pereira, L.T. (author), van Herk, S.W.L. (author), Avallone, F. (author), Ragni, D. (author), Kotsonis, M. (author)
The newly refurbished vertical tunnel (V-tunnel) at Delft University of Technology has been redesigned as a state-of-the-art facility for research in aeroacoustics (A-tunnel), as well as fundamental studies in laminar-turbulent transition and flow control. This manuscript focuses on the design and refurbishment aspects of the facility,...
journal article 2020
document
Rubio Carpio, A. (author), Avallone, F. (author), Ragni, D. (author), Snellen, M. (author), van der Zwaag, S. (author)
An experimental study on broadband noise scattered by permeable trailing edges with different pore arrangements is performed. A NACA 0018 airfoil with chord c = 0.2 m is investigated at chord-based Reynolds numbers ranging from 1.4 × 10<sup>5</sup> to 3.8 × 10<sup>5</sup> and angles of attack of 0.2 and 5.4 degrees. Noise emission from five...
journal article 2020
document
Merino Martinez, R. (author), Luesutthiviboon, S. (author), Zamponi, R. (author), Rubio Carpio, A. (author), Ragni, D. (author), Sijtsma, P. (author), Snellen, M. (author), Schram, Christophe (author)
In this paper, the performance of four acoustic imaging methods: conventional frequency domain beamforming (CFDBF), functional beamforming (FUNBF), enhanced high resolution CLEAN–SC (EHR–CLEAN–SC) and generalized inverse beamforming (GIBF), is investigated in terms of accuracy and variability. Three experimental test cases are considered: 1)...
journal article 2020
document
Rubio Carpio, A. (author), Avallone, F. (author), Ragni, D. (author), Snellen, M. (author), van der Zwaag, S. (author)
The turbulent flow over a porous trailing edge of a NACA 0018 airfoil is experimentally investigated to study the link between the hydrodynamic flow field and the acoustic scattering. Four porous trailing edges, obtained from open-cell metal foams, are tested to analyze the effects on far-field noise of the permeability of the material and of...
journal article 2019
document
Mayer, Jonathan (author), Rubio Carpio, A. (author), Ragni, D. (author)
The present work analyses broadband noise scattering from permeable trailing edges with identical micro-structure but under a change of temperature. Experiments are performed in an anechoic wind tunnel using a NACA0018 airfoil at chord-based Reynolds numbers between 1.88 × 10<sup>5</sup> and 3.14 × 10<sup>5</sup> and no incidence. A...
journal article 2019
document
Merino Martinez, R. (author), Sijtsma, P. (author), Rubio Carpio, A. (author), Zamponi, R. (author), Luesutthiviboon, S. (author), Malgoezar, A.M.N. (author), Snellen, M. (author), Schram, Christophe (author), Simons, D.G. (author)
Most acoustic imaging methods assume the presence of point sound sources and, hence, may fail to correctly estimate the sound emissions of distributed sound sources, such as trailing-edge noise. In this contribution, three integration techniques are suggested to overcome this issue based on models considering a single point source, a line...
journal article 2019
document
Hedayati, R. (author), Rubio Carpio, A. (author), Luesutthiviboon, S. (author), Ragni, D. (author), Avallone, F. (author), Casalino, D. (author), van der Zwaag, S. (author)
Studies on porous trailing edges, manufactured with open-cell Ni-Cr-Al foams with sub-millimeter pore sizes, have shown encouraging results for the mitigation of turbulent boundary-layer trailing-edge noise. However, the achieved noise mitigation is typically dependent upon the pore geometry, which is fixed after manufacturing. In this study,...
journal article 2019
document
Arcondoulis, Elias J. G. (author), Ragni, D. (author), Rubio Carpio, A. (author), Avallone, F. (author), Liu, Yu (author), Yang, Yannian (author), Li, Zhiyong (author)
Porous coated cylinders have been shown to reduce the vortex shedding tone and broadband noise of a bare cylinder placed in uniform flow within specific Reynolds number regimes. The processes by which the vortex shedding and thus tone suppression take place are still uncertain despite numerous numerical and experimental studies. It is understood...
conference paper 2019
document
Rubio Carpio, A. (author), Merino Martinez, R. (author), Avallone, F. (author), Ragni, D. (author), Snellen, M. (author), van der Zwaag, S. (author)
The hydrodynamic and acoustic fields for a NACA 0018 with solid and porous trailing edge inserts are investigated. The porous inserts, covering 20% of the chord, are manufactured with metal foams with cell diameters of 450 and 800 μm and permeability values of 6 × 10−10 and 2.7 × 10−9 m2. The experiments are performed at a chord-based Reynolds...
journal article 2019
document
Rubio Carpio, A. (author), Avallone, F. (author), Ragni, D. (author), Snellen, M. (author), van der Zwaag, S. (author)
Turbulent boundary layer trailing-edge noise scattered by a NACA0018 airfoil equipped with 3D printed perforated trailing-edge inserts, i.e. with straight cylindrical channels connecting the two sides of the airfoil, is investigated. The inserts have different permeability in order to assess the effect of this property on broadband noise...
conference paper 2019
document
Teruna, C. (author), Manegar, F.A. (author), Avallone, F. (author), Casalino, D. (author), Ragni, D. (author), Rubio Carpio, A. (author), Carolus, Thomas (author)
This manuscript presents a numerical investigation of the turbulent boundary layer-trailing edge (TBL-TE) noise reduction with an open-cell porous material. The implementation of the porous media is verified by emulating a facility for characterizing the flow resistivity of the porous material. Subsequently, the porous media is applied on the...
conference paper 2019
document
Guariglia, Daniel (author), Rubio Carpio, A. (author), Schram, Christophe (author)
Shock-cell noise occurs in aero-engines when the nozzle exhaust is supersonic and shock-cells are present in the jet. In commercial turbofan engines, at cruise, the secondary flow is often supersonic underexpanded, with the formation of annular shock-cells in the jet and consequent onset of shock-cell noise. This paper aims at describing the...
journal article 2018
document
Rubio Carpio, A. (author), Avallone, F. (author), Ragni, D. (author)
The turbulent flow over a NACA 0018 airfoil with porous trailing edge inserts and the resulting scattered turbulent-boundary-layer trailing edge noise are studied to investigate the effect of the cross-flow through the material. The experiments are performed at a chord-based Reynolds number of 2.63×10<sup>5</sup> and an angle of attack of 0°....
conference paper 2018
document
Merino Martinez, R. (author), Rubio Carpio, A. (author), Avallone, F. (author), Ragni, D. (author), Snellen, M. (author), van der Zwaag, S. (author)
conference paper 2017
Searched for: author%3A%22Rubio+Carpio%2C+A.%22
(1 - 15 of 15)