- document
-
Ogugua, C.J. (author), Anton, S.V. (author), Tripathi, A.P. (author), Larrabeiti, Miguel Dominguez (author), van Hees, S.O. (author), Sinke, J. (author), Dransfeld, C.A. (author)Autoclave curing is one of the most energy consuming processes in manufacturing carbon fibre reinforced polymers. In order to improve the energy efficiency, one needs to understand energy usage in an autoclave and factors that influence it. This work presents two thermodynamic based models for estimating energy consumption in an autoclave....journal article 2023
- document
-
Liu, S. (author), Sinke, J. (author), Dransfeld, C.A. (author)The bias-extension test is one of the test methods to characterise the intra-ply shear behaviour of continuous fibre reinforced composites including fabrics and unidirectional (UD) materials. For the determination of the major mechanical properties of metals, often a uniaxial tensile test is used. Combination of these two methods for the...journal article 2023
- document
-
Golzar, M. (author), Sinke, J. (author), Abouhamzeh, M. (author)Shrinkages, distortions and high residual stresses in the thermoplastic composite parts are induced due to high processing temperature, anisotropy, and fiber–matrix shrinkage mismatch. In this paper the shrinkages have been investigated experimentally and modeled by thermo-mechanical constitutive equations for PolyPhenylene Sulfide (PPS) and...journal article 2022
- document
-
Giasin, Khaled (author), Atif, Muhammad (author), Ma, Yuan (author), Jiang, Chulin (author), Koklu, Ugur (author), Sinke, J. (author)GLARE laminates are multi-layered metal-composite materials created from bonding sheets of metallic alloys with carbon or glass fibre layers. The application of hybrid-conventional machining processes such as ultrasonic-assisted drilling (UAD) is becoming of great interest to the aerospace industry due to its capability in reducing the...journal article 2022
- document
-
Gülmez, D.E. (author), Sinke, J. (author), Dransfeld, C.A. (author)Discontinuous tape composites have considerable attention due to their high formability and tailorable structures. Despite their advantages, this discontinuity leads to complex structures and makes it difficult to predict their mechanical properties. On the other hand, they have high orientational and dimensional sensitivity, which causes...conference paper 2022
- document
-
Ogugua, C.J. (author), Sinke, J. (author), Dransfeld, C.A. (author)This work quantifies and compares the environmental impact of a thermoset CFRP aircraft skin panel to that of a thermoplastic CFRP panel. This comparison is done using a cradle to gate life cycle assessment including impacts from raw material extraction, manufacturing and end of life. In addition, a hotspot analysis was performed to identify...conference paper 2022
- document
-
Liu, S. (author), Sinke, J. (author), Dransfeld, C.A. (author)Hot-pressing can be an attractive fabrication method that enables the forming of hybrid materials like thermoset based fibre metal laminates. However, the process simulation on press forming requires accurate material characterization and boundary conditions to facilitate part design for a defect-free component. In order to improve the overall...conference paper 2022
- document
-
Liu, S. (author), Sinke, J. (author), Dransfeld, C.A. (author)Forming process with pre-stacked and uncured thermoset fibre metal laminate offers improved deformability compared to full-cured laminate especially for the production of complex structural components. This work investigated the friction behaviour at the metal-prepreg interface of glass fibre reinforced aluminium laminate through an inter-ply...journal article 2021
- document
-
Nardi, D. (author), Sinke, J. (author)The correct prediction of a composite parts’ final performance is of paramount importance during the initial design phase of the manufacturing process. To this end the correct evaluation of the most effective process parameters and their influence on the parts performance is key for the success of the manufacturing process. Our aim with this...journal article 2021
- document
-
Struzziero, G. (author), Nardi, D. (author), Sinke, J. (author), Teuwen, Julie J.E. (author)The paper addresses the role played by the cure stage of a vacuum assisted resin transfer molding process in residual stresses generation. The Airstone 780E epoxy resin and Hardener 785H system broadly used in the wind turbine blade industry has been used in this study. The viscous–elastic properties of the resin have been characterized and...journal article 2020
- document
-
Giasin, K. (author), Hawxwell, J. (author), Sinke, J. (author), Dhakal, H. (author), Köklü, U. (author), Brousseau, E. (author)Fibre metal laminates (FMLs) are multilayered metal composite materials currently used in aeronautical structures, especially where fatigue and impact resistance are required. FMLs are produced in large panels and often require assembly using the drilling process for riveting purposes. Hole making is a critical machining process in the...journal article 2020
- document
-
Saunders-Smits, Gillian (author), Rans, C.D. (author), Teuwen, Julie J.E. (author), Sinke, J. (author), Alderliesten, R.C. (author), van Valkenburg, W.F. (author)Although aerospace traditionally has always had a multidisciplinary approach to engineering and design, the increasing complexity of aircraft and spacecraft and the rapid digitization within the aerospace industry has led to a large number of related engineering and scientific disciplines such as electrical engineers, computer scientist to work...conference paper 2020
- document
-
Jakubczak, Patryk (author), Nardi, D. (author), Bienas, Jaroslaw (author), Sinke, J. (author)The manufacturing of Fibre Metal Laminates, consisting of alternating layers of pre-preg fibre and metal is complex, and defects can be introduced during manufacturing. The automation of the manufacturing steps is vital for future Glare production, and specific defects have to be considered. Among them, gaps between pre-preg plies represent a...journal article 2019
- document
-
Nardi, D. (author), Sinke, J. (author)Press forming of Fibre Reinforced Thermoplastics (FRTP) is a widely used manufacturing process. However, in order to boost innovation in FRTP production, new manufacturing strategies have to be implemented. In this context, the multistep forming process represents a promising concept for achieving a higher level of performances by means of...conference paper 2019
- document
-
Abouhamzeh, M. (author), Sinke, J. (author), Benedictus, R. (author)Distortions and residual stresses are predicted in Fibre Metal Laminates (FMLs) under large deformations. A new modelling procedure is presented for small and large deformation analysis of thermo-viscoelastic problems of orthotropic materials. The material model is implemented in a finite element package which can be used for cure and/or...journal article 2019
- document
-
Hagenbeek, M. (author), Sinke, J. (author)Heated GLARE, a Fibre Metal Laminate with an integrated heater element, has a promising potential as de- or anti-icing system in aircraft structures. To investigate the long-term durability of heated GLARE previously reported thermal cycling tests up to 12,000 cycles are extended up to 144,000 cycles and moisture conditioning is included....journal article 2019
- document
-
Hagenbeek, M. (author), Sinke, J. (author)Heated GLARE, a Fibre Metal Laminate with an integrated heater element, has been developed for de- or anti-icing systems in aircraft structures. Besides cyclic thermal loading these structures are also subjected to mechanical loading. To investigate the effect of static loading in addition to thermal cycling a series of tests have been performed...journal article 2019
- document
-
Abouhamzeh, M. (author), Sinke, J. (author), Benedictus, R. (author)This paper reviews predictive models developed for the development of residual stresses and shape distortions during the manufacturing of thermoset polymeric/composite materials. Different sources that produce residual stresses and shape changes in the laminated panels are described and reviewed. An overview is presented on the...review 2019
- document
-
Abouhamzeh, M. (author), Nardi, D. (author), Leonard, R.A. (author), Sinke, J. (author)During the automated manufacturing of fibre reinforced laminates, defects can be produced. Gaps and overlaps between adjacent prepreg layers can be produced in composites during the tape-layup process. However, the topic is not yet studied for hybrid materials, in which metal sheets and thin prepreg layers lead to different effects due to the...journal article 2018
- document
-
Nardi, D. (author), Abouhamzeh, M. (author), Leonard, R.A. (author), Sinke, J. (author)Gaps and overlaps between pre-preg plies represent common flaws in composite materials that can be introduced easily in an automated fibre placement manufacturing process and are potentially detrimental for the mechanical performances of the final laminates. Whereas gaps and overlaps have been addressed for full composite material, the topic...journal article 2018