Searched for: author:"Smit, G."
(1 - 14 of 14)
document
Henselmans, P.W.J. (author), Smit, G. (author), Breedveld, P. (author)
One of the most prominent drivers in the development of surgical procedures is the will to reduce their invasiveness, attested by minimally invasive surgery being the gold standards in many surgical procedures and natural orifices transluminal endoscopic surgery gaining acceptance. A logical next step in this pursuit is the introduction of...
journal article 2019
document
Cuellar Lopez, J.S. (author), Smit, G. (author), Breedveld, P. (author), Zadpoor, A.A. (author), Plettenburg, D.H. (author)
In developing countries, the access of amputees to prosthetic devices is very limited. In a way to increase accessibility of prosthetic hands, we have recently developed a new approach for the design and 3D printing of non-assembly active hand prostheses using inexpensive 3D printers working on the basis of material extrusion technology. This...
journal article 2019
document
Cuellar Lopez, J.S. (author), Smit, G. (author), Zadpoor, A.A. (author), Breedveld, P. (author)
In developing countries, prosthetic workshops are limited, difficult to reach, or even non-existent. Especially, fabrication of active, multi-articulated, and personalized hand prosthetic devices is often seen as a time-consuming and demanding process. An active prosthetic hand made through the fused deposition modelling technology and fully...
journal article 2018
document
Maat (student), B.B. (author), Smit, G. (author), Plettenburg, D.H. (author), Breedveld, P. (author)
The group of passive prostheses consists of prosthetic hands and prosthetic tools. These can either be static or adjustable. Limited research and development on passive prostheses has been performed although many people use these prosthesis types. Although some publications describe passive prostheses, no recent review of the peer-reviewed...
review 2017
document
ten Kate, J (author), Smit, G. (author), Breedveld, P. (author)
Goal: This paper aims to provide an overview with quantitative information of existing 3D-printed upper limb prostheses. We will identify the benefits and drawbacks of 3D-printed devices to enable improvement of current devices based on the demands of prostheses users. Methods: A review was performed using Scopus, Web of Science and websites...
journal article 2017
document
Henselmans, P.W.J. (author), Gottenbos, Stefan (author), Smit, G. (author), Breedveld, P. (author)
Follow-the-leader propagation allows for the insertion of flexible surgical instruments along curved paths, reducing the access required for natural orifice transluminal endoscopic surgery. Currently, the most promising follow-the-leader instruments use the alternating memory method containing two mechanical memory-banks for controlling the...
journal article 2017
document
Haverkate, L. (author), Smit, G. (author), Plettenburg, D.H. (author)
Study Design: Experimental trial. Background: The functional performance of currently available body-powered prostheses is unknown. Objective: The goal of this study was to objectively assess and compare the functional performance of three commonly used body-powered upper limb terminal devices. Methods: Twenty-one able-bodied subjects (n=21, age...
journal article 2014
document
Smit, G. (author), Plettenburg, D.H. (author), Van der Helm, F.C.T. (author)
Rejection rates of upper limb prostheses are high (23-45%). Amputees indicate that the highest design priority should be reduction of the mass of the prosthetic device. Despite all efforts, the mass of the new prosthetic hands is 35-73% higher than that of older hands. Furthermore current hands are thicker than a human hand, they operate slower...
journal article 2014
document
Smit, G. (author), Plettenbrug, D.H. (author), Van der Helm, F.C.T. (author)
Background: Cosmetic gloves that cover a prosthetic hand have a parasitic positive stiffness that counteracts the flexion of a finger joint. Objectives: Reducing the required input torque to move a finger of a prosthetic hand by compensating the parasitic stiffness of the cosmetic glove. Study design: Experimental, test bench. Methods: The...
journal article 2014
document
Smit, G. (author), Plettenburg, D.H. (author), Van der Helm, F.C. (author)
The goal of this study was to find an efficient method of energy transmission for application in an anthropomorphic underactuated body-powered (BP) prosthetic hand. A pulley-cable finger and a hydraulic cylinder finger were designed and tested to compare the pulley-cable transmission principle with the hydraulic cylinder transmission principle....
journal article 2014
document
Smit, G. (author), Plettenburg, D.H. (author)
Current articulating electric and body-powered hands have a lower pinch force (15–34 N) than electric hands with stiff fingers (55–100 N). The cosmetic glove, which covers a hand prosthesis, negatively affects the mechanical efficiency of a prosthesis. The goal of this study is to mechanically compare polyvinylchloride (PVC) and silicone...
journal article 2013
document
Smit, G. (author)
Replacement of a missing hand by an artificial alternative remains one of the biggest challenges in rehabilitation. Although many different terminal devices are available, around 27% of the amputees does not actively use their device and 20% totally refrains from wearing it. There are various reasons for prosthesis abandonment, e.g. wearing...
doctoral thesis 2013
document
Smit, G. (author), Bongers, R.M. (author), Van der Sluis, C.K. (author), Plettenburg, D.H. (author)
Quantitative data on the mechanical performance of upper-limb prostheses are very important in prostheses development and selection. The primary goal of this study was to objectively evaluate the mechanical performance of adult-size voluntary opening (VO) prosthetic terminal devices and select the best tested device. A second goal was to see...
journal article 2012
document
Smit, G. (author), Plettenburg, D.H. (author)
The Delft Institute of Prosthetics and Orthotics has started a research program to develop an improved voluntary closing, body-powered hand prosthesis. Five commercially available voluntary closing terminal devices were mechanically tested: three hands [Hosmer APRL VC hand, Hosmer Soft VC Male hand, Otto Bock 8K24] and two hooks [Hosmer APRL VC...
journal article 2010
Searched for: author:"Smit, G."
(1 - 14 of 14)