Bio-polymer modified bitumen

Bitumen is a key constitutive material in asphalt pavements. It binds together the rock scaffolding of a pavement. Bitumen provides asphalt pavement with flexibility and enables it to respond to traffic loading and return to its original condition after the loading, i.e. bitumen restores/repairs the damage. In Porous Asphalt (PA) or...

Extraction of low molecular weight polyhydroxyalkanoates from mixed microbial cultures using bio-based solvents

(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) obtained from waste/wastewater using a mixed microbial culture (MMC) usually varies in its properties due to daily variation in the waste/wastewater composition applied as feedstock. In the current study, the average molecular weight (MW) of PHBV was purposely reduced from about 1 MDa to about...

Systematic solvent screening and selection for polyhydroxyalkanoates (PHBV) recovery from biomass

The biotechnological production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) derived from organic waste streams by mixed microbial communities is well established at the pilot-level. However, there is limited research on the recovery of the biopolymer from the microbial biomass, while its impact on product quality and product costs...

From waste to self-healing concrete: A proof-of-concept of a new application for polyhydroxyalkanoate

Polyhydroxyalkanoate (PHA) production is a promising opportunity to recover organic carbon from waste streams. However, widespread application of waste-derived PHA as biodegradable plastic is restricted by expensive purification steps, high quality requirements, and a fierce competition with the conventional plastic market. To overcome these...

High-rate ethanol production at low pH using the anaerobic granular sludge process

In this study, we investigated the operational performance and product spectrum of glucose-fermenting anaerobic granular sludge reactor at pH 4. A selective environment for the growth of granules was implemented by the introduction of a 2 min settling phase, a hydraulic retention time of 6 h and a solid retention time of 12 ± 3 days. The...

Pilot-Scale Polyhydroxyalkanoate Production from Organic Waste: Process Characteristics at High pH and High Ammonium Concentration

Polyhydroxyalkanoate (PHA) accumulating microbial enrichment was established on volatile fatty acids (VFAs) containing leachate derived from the organic fraction of municipal solid waste (OFMSW). The enrichment was based on a 12-h feast-famine batch cycle and an exchange ratio of 50% in which VFAs were completely consumed in less than 50 min...

Simultaneous growth and poly(3-hydroxybutyrate) (PHB) accumulation in a Plasticicumulans acidivorans dominated enrichment culture

The wide variety of organic carbon to nitrogen and phosphorous ratios that are encountered in different wastewaters has a major impact on the poly(3-hydroxybutyrate) (PHB) accumulation potential of microbial communities. In this study we investigated the influence of the substrate composition in terms of the carbon to nitrogen (C/N) or...

Resource recovery from organic waste streams by microbial enrichment cultures

Polyhydroxyalkanoate (PHA) is a natural product that can potentially replace a part of the chemicals and plastics derived from fossil sources. One of the main barriers for market entry of PHA is its relatively high price compared to conventional (fossil) feedstocks. This high price is related to current industrial production methods which are...

Lipid recovery from a vegetable oil emulsion using microbial enrichment cultures

Background Many waste streams have a relatively high vegetable oil content, which is a potential resource that should be recovered. Microbial storage compound production for the recovery of lipids from lipid-water emulsions with open (unsterilized) microbial cultures was investigated in a sequencing batch reactor using a diluted vegetable oil...

Method for obtaining an open phototrophic culture with improved storage compound production capacity

The invention is directed to a method for producing an open phototrophic culture with improved storage compound production capability. In accordance with the invention, a starting culture is submitted to selective pressure, thus giving a competitive advantage to storage compound producing species, by subjecting said starting culture to a cycle...