Experimental evaluation of interface adhesion of a flax fiber composite patch with epoxy and polyurethane adhesives for the reinforcement of steel structures

Using fiber-reinforced composite patches for repairing damaged structures made of metal or/and concrete is an interesting and widely available solution on the market using synthetic materials. These repairing patches are bonded on the structures’ surfaces to increase their strength against internal stresses, as well as protect them from external...

Synthesis and characterization of novel eco-epoxy adhesives based on the modified tannic acid for self-healing joints

The aim of this research was to investigate the self-healing potential of damaged Al joints when bonded using novel eco-epoxide adhesives derived from tannic acid (TA). Two eco-epoxy components based on TA, (A) glycidyl ether and (B) glycidyl phosphate ester of TA, were produced. The effect of the eco-epoxy components on the self-healing...

Self-healing capability of novel eco-epoxy adhesives based on the modified tannic acid on Al adherends tested in a single lap joint

The aim of this paper is to study the self-healing capability of fractured Al joints bonded with novel eco-epoxide adhesives synthesized from a bio-renewable raw material (tannic acid – TA). Two synthesized eco-epoxy components based on TA, (A) glycidyl ether and (B) glycidyl phosphate ester of TA, were used as a replacement for the toxic epoxy...

Effect of salt spray ageing on the fracture of composite-to-metal bonded joints

This work investigates the effect of long-term environmental exposure on the performance of composite-to-metal bonded joints. Specimens are manufactured using a carbon-fiber reinforced polymer (CFRP) co-bonded to a steel member with epoxy adhesive and aged in a salt spray chamber. The mixed-mode fracture behavior of the non-aged and aged...

Damage characterization of adhesively-bonded Bi-material joints using acoustic emission

The aim of the present study is to characterize the damage in bi-material steel-to-composite double-lap adhesively-bonded joints using Acoustic Emission (AE). Two different structural adhesives, a ductile (Methacrylate-based) and brittle (Epoxy-based), were used to bond CFRP skins to a steel core. The fabricated joints were loaded in tension...

Adhesion quality of steel-CFRP interface bonding

In this work, peel tests were used to assess the adhesion quality between carbon fiber reinforced polymers (CFRP) and carbon steel plates. The tests were performed according to the ASTM standard of floating roller peel tests (D3167–97) with a new specimen layup. The layup and geometry of specimens was defined in order to have the CFRP as the...