Pages
- 1
- 2
- document
-
Zhang, Z. (author), Wu, Chenming (author), Dai, C. (author), Shi, Qingqing (author), Fang, G. (author), Xie, Dongfang (author), Zhao, Xiangjie (author), Liu, Yong Jin (author), Wang, C.C. (author), Wang, Xiu Jie (author)Despite the recent advances in artificial tissue and organ engineering, how to generate large size viable and functional complex organs still remains as a grand challenge for regenerative medicine. Three-dimensional bioprinting has demonstrated its advantages as one of the major methods in fabricating simple tissues, yet it still faces...journal article 2022
- document
-
Wang, Dandan (author), Xu, Jinlan (author), Gao, Fei (author), Wang, C.C. (author), Gu, Renshu (author), Lin, Fei (author), Rabczuk, Timon (author), Xu, Gang (author)In this paper, a deep learning framework combined with isogeometric analysis (IGA for short) called IGA-Reuse-Net is proposed for efficient reuse of numerical simulation on a set of topology-consistent models. Compared with previous data-driven numerical simulation methods only for simple computational domains, our method can predict high...journal article 2022
- document
-
Fang, G. (author), Tian, Yingjun (author), Yang, Zhi Xin (author), Geraedts, Jo M.P. (author), Wang, C.C. (author)This article presents an efficient learning-based method to solve the <italic>inverse kinematic</italic> (IK) problem on soft robots with highly nonlinear deformation. The major challenge of efficiently computing IK for such robots is due to the lack of analytical formulation for either forward or inverse kinematics. To address...journal article 2022
- document
-
Xu, Yabin (author), Nan, L. (author), Zhou, Laishui (author), Wang, Jun (author), Wang, C.C. (author)Reconstruction of high-fidelity 3D objects or scenes is a fundamental research problem. Recent advances in RGB-D fusion have demonstrated the potential of producing 3D models from consumer-level RGB-D cameras. However, due to the discrete nature and limited resolution of their surface representations (e.g., point or voxel based), existing...journal article 2022
- document
-
Fang, G. (author), Tian, Yingjun (author), Weightman, Andrew (author), Wang, C.C. (author)Soft robots can safely interact with environments because of their mechanical compliance. Self-collision is also employed in the modern design of soft robots to enhance their performance during different tasks. However, developing an efficient and reliable simulator that can handle the collision response well, is still a challenging task in...conference paper 2022
- document
-
Liu, Z. (author), Han, Xingjian (author), Zhang, Yuchen (author), Chen, Xiangjia (author), Lai, Y. (author), Doubrovski, E.L. (author), Whiting, Emily (author), Wang, C.C. (author)In this paper, we present a new computational pipeline for designing and fabricating 4D garments as knitwear that considers comfort during body movement. This is achieved by careful control of elasticity distribution to reduce uncomfortable pressure and unwanted sliding caused by body motion. We exploit the ability to knit patterns in...journal article 2021
- document
-
Rossing, Lars (author), Scharff, R.B.N. (author), Chömpff, Bryan (author), Wang, C.C. (author), Doubrovski, E.L. (author)Silicones have desirable properties such as skin-safety, high temperature-resistance, and flexibility. Many applications require the presence of a hard body connected to the silicone. Traditionally, it has been difficult to create strong bonding between silicones and hard materials. In this study, a technique is presented to control the...journal article 2020
- document
-
Fang, G. (author), Zhang, Tianyu (author), Zhong, Sikai (author), Chen, Xiangjia (author), Zhong, Zichun (author), Wang, C.C. (author)The anisotropy of mechanical strength on a 3D printed model can be controlled in a multi-axis 3D printing system as materials can be accumulated along dynamically varied directions. In this paper, we present a new computational framework to generate specially designed layers and toolpaths of multi-axis 3D printing for strengthening a model by...journal article 2020
- document
-
Kuipers, T. (author), Doubrovski, E.L. (author), Wu, J. (author), Wang, C.C. (author)3D printing techniques such as Fused Deposition Modeling (FDM) have enabled the fabrication of complex geometry quickly and cheaply. Objects are produced by filling (a portion of) the 2D polygons of consecutive layers with contour-parallel extrusion toolpaths. Uniform width toolpaths consisting of inward offsets from the outline polygons...journal article 2020
- document
-
Dai, C. (author), Lefebvre, Sylvain (author), Yu, Kai Ming (author), Geraedts, Jo M.P. (author), Wang, C.C. (author)We present a method for effectively planning the motion trajectory of robots in manufacturing tasks, the tool paths of which are usually complex and have a large number of discrete time constraints as waypoints. Kinematic redundancy also exists in these robotic systems. The jerk of motion is optimized in our trajectory planning method at the...journal article 2020
- document
-
Wei, Mingqiang (author), Tian, Yang (author), Pang, Wai-Man (author), Wang, C.C. (author), Pang, Ming-Yong (author), Wang, Jun (author), Qin, Jin (author), Heng, Pheng-Ann (author)Bas-relief is characterized by its unique presentation of intrinsic shape properties and/or detailed appearance using materials raised up in different degrees above a background. However, many bas-relief modeling methods could not manipulate scene details well. We propose a simple and effective solution for two kinds of bas-relief modeling (i...journal article 2019
- document
-
Wang, W. (author), Munro, D.P. (author), Wang, C.C. (author), van Keulen, A. (author), Wu, J. (author)The design of optimal structures and the planning of (additive manufacturing) fabrication sequences have been considered typically as two separate tasks that are performed consecutively. In the light of recent advances in robot-assisted (wire-arc) additive manufacturing which enable addition of material along curved surfaces, we present a...journal article 2019
- document
-
Scharff, R.B.N. (author), Doornbusch, Rens M. (author), Doubrovski, E.L. (author), Wu, J. (author), Geraedts, Jo M.P. (author), Wang, C.C. (author)Actuators using soft materials feature a large number of degrees of freedom. This tremendous flexibility allows a soft actuator to passively adapt its shape to the objects under interaction. In this paper, we propose a novel proprioception method for soft actuators during real-time interaction with previously unknown objects. First, we design...journal article 2019
- document
-
Kuipers, T. (author), Wu, J. (author), Wang, C.C. (author)The fabrication flexibility of 3D printing has sparked a lot of interest in designing structures with spatially graded material properties. In this paper, we propose a new type of density graded structure that is particularly designed for 3D printing systems based on filament extrusion. In order to ensure high-quality fabrication results,...journal article 2019
- document
-
Hou, T. (author), Xu, J. (author), Elkhuizen, W.S. (author), Wang, C.C. (author), Jiang, Jiehui (author), Geraedts, Jo M.P. (author), Song, Y. (author)2D coil design limits the use of wireless power transfer (WPT) in many products with freeform outer shapes. In this paper, enabled by 3D printed electronics, we propose a systematic approach to design and fabricate 3D coils for WPT. Based on the circular spiral and rectangular spiral patterns, 3D receiver and transmitter coils can be...journal article 2019
- document
-
Xian, Chuhua (author), Jin, Shuo (author), Wang, C.C. (author)Handle-driven image warping based on linear blending is widely used in many applications because of its merits on intuitiveness, efficiency, and ease of implementation. In this paper, we develop a method to compute high-quality weights within a closed domain for image warping. The property of C<sub>2</sub> continuity in weights is guaranteed...journal article 2018
- document
-
Dai, C. (author), Wang, C.C. (author), Wu, Chenming (author), Lefebre, Sylvain (author), Fang, G. (author), Liu, Yong-Jin (author)This paper presents a new method to fabricate 3D models on a robotic printing system equipped with multi-axis motion. Materials are accumulated inside the volume along curved tool-paths so that the need of supporting structures can be tremendously reduced - if not completely abandoned - on all models. Our strategy to tackle the challenge of...journal article 2018
- document
-
Wang, Weiming (author), Liu, Yong-Jin (author), Wu, J. (author), Tian, Shengjing (author), Wang, C.C. (author), Liu, Ligang (author), Liu, Xiuping (author)Offsetting-based hollowing is a solid modeling operation widely used in 3D printing, which can change the model's physical properties and reduce the weight by generating voids inside a model. However, a hollowing operation can lead to additional supporting structures for fabrication in interior voids, which cannot be removed. As a consequence...journal article 2018
- document
-
Yi, Ran (author), Wu, Chenming (author), Liu, Yong-Jin (author), He, Ying (author), Wang, C.C. (author)This paper presents a 3-D printing system that uses a low-cost off-the-shelf consumer projector to fabricate large models. Compared with traditional digital light processing (DLP) 3-D printers using a single vertical carriage, the platform of our DLP 3-D printer using delta mechanism can also move horizontally in the plane. We show that this...journal article 2018
- document
-
Liu, Xiuping (author), Lin, Liping (author), Wu, J. (author), Wang, W. (author), Yin, Baocai (author), Wang, C.C. (author)Wireframe models are becoming a popular option in 3D printing. Generating sparse wireframe models using classic mesh simplification methods leads to models that require a lot of support structures in the layer-upon-layer additive process. In this paper we present a mesh simplification method that takes into account the overhang angle....journal article 2018
Pages
- 1
- 2