Pages
- 1
- 2
- document
-
Wan, Z. (author), Xu, Y. (author), He, S. (author), Schlangen, E. (author), Šavija, B. (author)This paper presents a state-of-the-art review on the application of additive manufacturing (AM) in self-healing cementitious materials. AM has been utilized in self-healing cementitious materials in three ways: (1) concrete with 3D-printed capsules/vasculatures; (2) 3D concrete printing (3DCP) with fibers or supplementary cementitious...journal article 2024
- document
-
Xie, J. (author), Xu, Y. (author), Wan, Z. (author), Ghaderiaram, A. (author), Schlangen, E. (author), Šavija, B. (author)The high deformation capacity of auxetic cementitious cellular composites (ACCCs) makes them promising for strain-based energy harvesting applications in infrastructure. In this study, a novel piezoelectric energy harvester (PEH) with ACCCs and surface-mounted PVDF film based on strain-induced piezoelectric mechanisms has been designed,...journal article 2023
- document
-
Chang, Z. (author), Liang, M. (author), Xu, Y. (author), Wan, Z. (author), Schlangen, E. (author), Šavija, B. (author)In this study, an experimental setup to characterize the early-age creep of 3D printable mortar was proposed. The testing protocol comprises quasi-static compressive loading-unloading cycles, with 180-s holding periods in between. An analytical model based on a double power law was used to predict creep compliance with hardening time and...journal article 2023
- document
-
Chang, Z. (author), Wan, Z. (author), Xu, Y. (author), Schlangen, E. (author), Šavija, B. (author)Extrusion-based 3D concrete printing (3DCP) results in deposited materials with complex microstructures that have high porosity and distinct anisotropy. Due to the material heterogeneity and rapid growth of cracks, fracture analysis in these air-void structures is often complex, resulting in a high computational cost. This study proposes a...journal article 2022
- document
-
Xu, Y. (author), Gan, Y. (author), Chang, Z. (author), Wan, Z. (author), Schlangen, E. (author), Šavija, B. (author)Tailoring lattice structures is a commonly used method to develop lattice materials with desired mechanical properties. However, for cementitious lattice materials, besides the macroscopic lattice structure, the multi-phase microstructure of cement paste may have substantial impact on the mechanical responses. Therefore, this work proposes a...journal article 2022
- document
-
Chang, Z. (author), Liang, M. (author), Xu, Y. (author), Schlangen, E. (author), Šavija, B. (author)This research studies the impact of localized damage and deformed printing geometry on the structural failure of plastic collapse for 3D concrete printing (3DCP) using the lattice model. Two different approaches are utilized for buildability quantification: the (previously developed) load-unload method, which updates and relaxes the printing...journal article 2022
- document
-
Chang, Z. (author), Xu, Y. (author), Chen, Y. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)In this work, the lattice model is applied to study the printing process and quantify the buildability (i.e., the maximum height that can be printed) for 3D concrete printing (3DCP). The model simulates structural failure by incorporating an element birth technique, time-dependent stiffness and strength, printing velocity, non-uniform...journal article 2021
- document
-
Gan, Y. (author), Zhang, Hongzhi (author), Zhang, Y. (author), Xu, Y. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)This study presents an experimental investigation of fatigue properties of cement paste at the microscale. A strong size dependence is found for the flexural fatigue life of the cement paste specimen. Microscopic observations on the fractured surfaces suggest that there is a higher density of nano-scale cracks generated during the fatigue...journal article 2021
- document
-
Xu, Y. (author), Schlangen, E. (author), Šavija, B. (author)Door toepassing van 3D-printtechnieken kunnen cementgebonden materialen worden ontwikkeld met een bijzondere, niet-homogene interne structuur. Deze materialen kunnen auxetisch gedrag vertonen: ze zetten zijdelings uit (worden dikker) wanneer ze worden uitgerekt en ze trekken zijdelings samen als ze worden samengeperst. Aan de TU Delft is...journal article 2020
- document
-
Xu, Y. (author), Zhang, H. (author), Schlangen, E. (author), Lukovic, M. (author), Šavija, B. (author)Auxetic behavior refers to material with negative Poisson's ratio. In this research, a new type of cementitious auxetic material is developed. A novel crack bridging auxetic mechanism is discovered which is in contrast with a local buckling mechanism commonly employed to trigger auxetic behavior. Taking advantage of 3D printing techniques,...journal article 2020
- document
-
Zhang, H. (author), Xu, Y. (author), Gan, Y. (author), Chang, Z. (author), Schlangen, E. (author), Šavija, B. (author)Application of micromechanical modelling of hydrated cement paste (HCP) gains more and more interests in the field of cementitious materials. One of the most promising approaches is the use of so-called microstructure informed micromechanical models, which provides a direct link between microstructure and mechanical properties. In order to...journal article 2020
- document
-
Zhang, H. (author), Xu, Y. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)This paper presents a validation process of the developed multi-scale modelling scheme on mortar composites. Special attention was paid to make the material structure of real and virtual mortar specimens comparable at the meso-scale. The input mechanical parameters of cement paste (both bulk cement paste and interfacial transition zone) at the...journal article 2020
- document
-
Chaves Figueiredo, S. (author), Romero Rodriguez, C. (author), Ahmed, Zeeshan Y. (author), Bos, Derk H. (author), Xu, Y. (author), Salet, Theo M. (author), Copuroglu, Oguzhan (author), Schlangen, E. (author), Bos, Freek P. (author)Extrusion based additive manufacturing of cementitious materials has demonstrated strong potential to become widely used in the construction industry. However, the use of this technique in practice is conditioned by a feasible solution to implement reinforcement in such automated process. One of the most successful ductile materials in civil...journal article 2020
- document
-
Xu, Y. (author), Schlangen, E. (author), Šavija, B. (author)Mechanical behavior of cementitious cellular composites (CCC) with auxetic behavior was investigated under uniaxial compression and cyclic loading. Three cellular structures with different geometrical parameters are designed and prepared by 3D printing technique. Meanwhile, plain mortar and fiber reinforced mortar are used as constituent...book chapter 2020
- document
-
Xu, Y. (author), Schlangen, E. (author), Lukovic, M. (author), Šavija, B. (author)This research presents an investigation of the compressive behavior of auxetic cementitious cellular composites (CCCs) using a combination of experiments and finite element (FE) simulations. Typical auxetic centrosymmetric geometry was used as unit cells for the cellular structure and fiber reinforced cementitious mortar were used as...journal article 2020
- document
-
Xu, Y. (author), Zhang, H. (author), Šavija, B. (author), Chaves Figueiredo, S. (author), Schlangen, E. (author)A method is presented to model deformation and fracture behavior of 3D printed disordered lattice materials under uniaxial tensile load. A lattice model was used to predict crack pattern and load-displacement response of the printed lattice materials. To include the influence of typical layered structures of 3D printed materials in the...journal article 2019
- document
-
Mercuri, L. (author), Romero Rodriguez, C. (author), Xu, Y. (author), Chaves Figueiredo, S. (author), Mors, R.M. (author), Rossi, E. (author), Anglani, G. (author), Antonaci, P. (author), Šavija, B. (author), Schlangen, E. (author)Soft inclusions, such as capsules and other particulate admixtures are increasingly being used in cementitious materials for functional purposes (i.e. self-healing and self-sensing of concrete). Yet, their influence on the fracture behaviour of the material is sometimes overlooked and requires in-depth study for the optimization of mechanical...conference paper 2019
- document
-
Xu, Y. (author), Schlangen, E. (author), Šavija, B. (author)Strain hardening cementitious composites are a class of cementitious materials showing metal-like (i.e. pseudo-plastic) behavior in tension due to their multiple cracking ability. This is commonly achieved through use of fiber reinforcement (such as PVA) or, similarly, textile reinforcement (TRC). Increasing the ductility is important in...conference paper 2019
- document
-
Xu, Y. (author), Šavija, B. (author), Schlangen, E. (author)Traditionally, mechanical properties of cementitious materials are designed<br/>“chemically”, namely by configuring their mix proportions. Owning to the development of 3D printing technology, “physical” tailoring the meso-structure of cementitious materials to design their mechanical properties becomes possible. In the present study,...conference paper 2019
- document
-
Zhang, H. (author), Xu, Y. (author), Gan, Y. (author), Chang, Z. (author), Schlangen, E. (author), Šavija, B. (author)The aim of this work is to investigate the mechanical performance of hardened cement paste (HCP) under compression at the micrometre length scale. In order to achieve this, both experimental and numerical approaches were applied. In the experimental part, micrometre sized HCP specimens were fabricated and subjected to uniaxial compression by...journal article 2019
Pages
- 1
- 2