Equivalent material properties of the heat-affected zone in welded cold-formed rectangular hollow section connections

A welded connection consists of three main material zones, the base material (BM), the heat-affect zone (HAZ), and the weld metal (WM). The strength of HAZ depends on the BM grade and manufacturing process, electrode grade, and welding parameters. Under certain conditions, HAZ has the lowest material strength, especially for high-strength...

The C1 wedge connection in towers for wind turbine structures, tensile behaviour of a segment test

This paper shows a part of the analysis of the development of the second generation of the C1 wedge connections for use in offshore wind turbine supporting towers. The novelty of this connection is that bolt failure is avoided under static and fatigue loads. This study aims to investigate the tensile behaviour of the connection by combining...

Data-driven ballast layer degradation identification and maintenance decision based on track geometry irregularities

Ballast layer defects are the primary cause for rapid track geometry degradation. Detecting these defects in real-time during track inspections is urgently needed to ensure safe train operations. To achieve this, an indicator, the track degradation rate (TDR) was proposed. This rate is calculated using track geometry inspection data to locate...

Strengthening effects evaluation on fatigue damage of rib to deck joint in orthotropic steel deck

Strengthening fatigue damage of orthotropic steel decks (OSDs) needs to comprehensively consider the strengthening effect and the dead weight introduced during the strengthening process, especially for OSDs in super large-span bridges or old renovated bridges, where the dead weight cannot be significantly increased during repair and...

An assessment method of rail corrugation based on wheel–rail vertical force and its application for rail grinding

In practice, the assessment and treatment of rail corrugation are quantitatively based on the corrugation depth. Wheel–rail vertical forces (WRVF), as a direct reflection of wheel–rail interaction, can give expression to the corrugation depth and thus serve as a key parameter for assessing the corrugation. In this paper, we propose an...

A macro prediction model for butt-welded (U)HSS connections with softened HAZ

This paper reports an investigation on the tensile resistance of fully-penetrated butt-welded connections of (ultra-)high-strength steels considering the strength softening of the heat-affected zone (HAZ) and the strengthening due to the transverse constraint. Firstly, a parametric study is carried out to analyse the tensile behaviour of...

FE-assisted investigation for mechanical behaviour of connections in offshore wind turbine towers

The overall competitiveness of offshore wind turbine towers is significantly influenced by the selection of the connection. The following three types of connections: a conventional bolted ring flange (RF) connection, ring flange connection with defined contact surfaces (RFD), and C1 wedge connection (C1-WC) are considered. A quantitative...

A method for determining the constitutive model of the heat-affected zone using digital image correlation

The heat-affected zone (HAZ) is an unmelted region of a welded joint that has changed in material properties because of high temperatures during the welding process. HAZ has a lower strength than the base (parent) material (BM) and the weld metal (WM). The lower material strength is more significant if BM is made of high strength steel and...

Carriage interior noise-based inspection for rail corrugation on high-speed railway track

The presence of rail corrugation enlarges the wheel-rail impact and exacerbates the failure of track components, and the situation becomes even worse under high train speed, which promotes the urgent need for an efficient and easily accessible inspection method. Conventional diagnosis approaches such as axle box acceleration (ABA) and image...

Assessment of ballast layer under multiple field conditions in China

Ballast layer condition should be more regularly and accurately inspected to ensure safe train operation; however, traditional inspection methods cannot sufficiently fulfil this task. This paper presents a method of ground penetrating radar (GPR) application to reflect ballast layer fouling levels under diverse field conditions (annual gross...

Wheel-rail rolling contact behavior induced by both rail surface irregularity and sleeper hanging defects on a high-speed railway line

In this study, a wheel-rail transient rolling contact model capable of accounting for the nonlinear displacement-force properties of hanging sleepers is proposed. The sleeper hanging status affected by rail irregularities is an input for an analysis of the wheel-rail contact behavior and related rail degradation in terms of plastic...