Searched for: collection%253Air
(1 - 20 of 24)

Pages

document
Martin, H.A. (author), Smits, Edsger C.P. (author), Poelma, René H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
This article introduces an online condition monitoring strategy that utilizes a transient heat pulse to detect package thermal performance degradation. The metric employed is the temperature-dependent transient thermal impedance "Zth(t, Tamb)."The proposed methodology offers quantitative insights into package thermal performance degradation...
journal article 2024
document
Hu, X. (author), Martin, H.A. (author), Poelma, René H. (author), Huang, J.L. (author), Rijckevorsel, H. (author), Scholten, H. (author), Smits, E.C.P. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
Resin-reinforced silver (Ag) sintering material is an effective and highly reliable solution for power electronics packaging. The hybrid material’s process parameters strongly influence its microstructure and pose a significant challenge in estimating its effective properties as a thin interconnect layer. This research demonstrates a novel 3D...
conference paper 2023
document
Martin, H.A. (author), Reintjes, Marcia (author), Reijs, Dave (author), Dorrestein, Sander (author), Kengen, Martien (author), Libon, Sebastien (author), Smits, Edsger (author), Tang, Xiao (author), Koelink, Marco (author), Poelma, René H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
Integrated Circuits and Electronic Modules experience concentrated thermal hot spots, which require advanced thermal solutions for effective distribution and dissipation of heat. The superior thermal properties of diamonds are long known, and it is an ideal material for heat-spreading applications. However, growing diamond films to the...
conference paper 2023
document
Nyns, Emile C.A. (author), Portero, Vincent (author), Deng, Shanliang (author), Jin, T. (author), Harlaar, Niels (author), Bart, Cindy I. (author), van Brakel, Thomas J. (author), Palmen, Meindert (author), Hjortnaes, Jesper (author), Ramkisoensing, Arti A. (author), Zhang, Kouchi (author), Poelma, René H. (author), Ördög, Balázs (author), de Vries, Antoine A.F. (author), Pijnappels, Daniël A. (author)
Background: Optogenetics could offer a solution to the current lack of an ambulatory method for the rapid automated cardioversion of atrial fibrillation (AF), but key translational aspects remain to be studied. Objective: To investigate whether optogenetic cardioversion of AF is effective in the aged heart and whether sufficient light...
journal article 2023
document
Du, L. (author), Zhao, Xiujuan (author), Poelma, René H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
SnBiAgCu solder alloy is an attractive soldering material for temperature-sensitive electronic devices due to its excellent creep properties. This study firstly reports the creep properties of SnBiAgCu solder alloy under different temperatures. Results show that the addition of Bi resulted in better creep resistance compared with that of...
conference paper 2023
document
Nyns, Emile C.A. (author), Jin, T. (author), Bart, Cindy I. (author), Bax, Wilhelmina H. (author), Zhang, Kouchi (author), Poelma, René H. (author), de Vries, Antoine A.F. (author), Pijnappels, Daniël A. (author)
journal article 2022
document
Nyns, Emile C.A. (author), Jin, T. (author), Fontes, Magda S. (author), van den Heuvel, Titus (author), Portero, Vincent (author), Bart, Cindy I. (author), Zeppenfeld, Katja (author), Zhang, Kouchi (author), Poelma, René H. (author)
AIMS: Ventricular tachyarrhythmias (VTs) are common in the pathologically remodelled heart. These arrhythmias can be lethal, necessitating acute treatment like electrical cardioversion to restore normal rhythm. Recently, it has been proposed that cardioversion may also be realized via optically controlled generation of bioelectricity by the...
journal article 2022
document
Yi, H. (author), Öztürk, E. (author), Koelink, Marco (author), Krimmling, Jana (author), Damian, Andrei A. (author), Debski, Wojciech (author), van Zeijl, H.W. (author), Zhang, Kouchi (author), Poelma, René H. (author)
High-performance IC-to-antenna interconnection is one of the key enablers for the mass production of high-end millimeter wave (mmW) radar systems above 100 GHz. In this work, a radar system with an on-package antenna array working at 122 GHz is presented. The antenna is placed on top of the molded package and the antenna-to-chip interconnection...
journal article 2022
document
Ye, Guigen (author), Fan, X. (author), Middelburg, L.M. (author), el Mansouri, B. (author), Poelma, René H. (author), Zhang, Kouchi (author)
In this paper, stability and mechanistic simulations for a four-beam-mass-based MEMS gravimeter were conducted, and guidelines for the gravimeter design were proposed. Based on a prototyped MEMS device, the nonlinear finite element model was validated first against the experimental results. Then, we demonstrated three different scenarios in...
journal article 2022
document
Du, L. (author), Zhao, Xiujuan (author), Watte, Piet (author), Poelma, René H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
The objective of this article is to investigate the thermal-fatigue properties of a commercially available lead-free solder alloy (SnBiAgCu) under the use of different types of potting compounds. Solder alloys with lower silver content are expected to substitute the conventional solder alloys SAC305 (Sn-3.0Ag-0.5Cu). First, the tensile...
conference paper 2022
document
Mirza Gheytaghi, Amir (author), Poelma, René H. (author), Sacco, L.N. (author), Vollebregt, S. (author), Zhang, Kouchi (author)
In this paper, the compressive stress of pristine and coated vertically-aligned (VA) multi-walled (MW) carbon nanotube (CNT) pillars were investigated using flat-punch nano-indentation. VA-MWCNT pillars of various diameters (30–150 µm) grown by low-pressure chemical vapor deposition on silicon wafer. A conformal brittle coating of niobium...
journal article 2020
document
Mirza Gheytaghi, Amir (author), Vollebregt, S. (author), Poelma, René H. (author), van Zeijl, H.W. (author), Zhang, Kouchi (author)
poster 2019
document
el Mansouri, B. (author), Middelburg, L.M. (author), Poelma, René H. (author), Zhang, Kouchi (author), van Zeijl, H.W. (author), Wei, J. (author), Jiang, H. (author), Vogel, J.G. (author), van Driel, W.D. (author)
Commercially available gravimeters and seismometers can be used for measuring Earth’s acceleration at resolution levels in the order of ng∕Hz (where g represents earth’s gravity) but they are typically high-cost and bulky. In this work the design of a bulk micromachined MEMS device exploiting non-linear buckling behaviour is described, aiming...
journal article 2019
document
Silvestri, C. (author), Riccio, Michele (author), Poelma, René H. (author), Jovic, A. (author), Morana, B. (author), Vollebregt, S. (author), Irace, Andrea (author), Zhang, Kouchi (author), Sarro, Pasqualina M (author)
The high aspect ratio and the porous nature of spatially oriented forest-like carbon nanotube (CNT) structures represent a unique opportunity to engineer a novel class of nanoscale assemblies. By combining CNTs and conformal coatings, a 3D lightweight scaffold with tailored behavior can be achieved. The effect of nanoscale coatings, aluminum...
journal article 2018
document
Middelburg, L.M. (author), el Mansouri, B. (author), Poelma, René H. (author), van Zeijl, H.W. (author), Wei, J. (author), Zhang, Kouchi (author), van Driel, W.D. (author)
The mechanical part of inertial sensors can be designed to have a large mechanical sensitivity, but also requires the transduction mechanism which translates this displacement. The overall system resolution in mechanical inertial sensors is dictated by the noise contribution of each stage and the magnitude of each sensitivity, see also Figure...
conference paper 2018
document
Huang, Z.Q. (author), Poelma, René H. (author), Vollebregt, S. (author), Koelink, M.H. (author), Boschman, E. (author), Kropf, R. (author), Gallouch, M. (author), Zhang, Kouchi (author)
This article shows the fabrication process and packaging of through polymer optical vias (TPOV). The TPOV enables encapsulation and packaging of silicon photonic systems using film assisted molding (FAM) and the creation of micron-sized through polymer optical vias. The optical vias are lithographically defined in thick film photo-resist (∼ 300...
conference paper 2018
document
Middelburg, L.M. (author), el Mansouri, B. (author), Poelma, René H. (author), Zhang, Kouchi (author), van Zeijl, H.W. (author), Wei, J. (author)
This work describes the design, modelling and realisation of the mechanical part of a non-linear MEMS accelerometer intended for large displacement behaviour. For this, a mass/spring system was designed with an extremely low resonance frequency. In this work the mechanical behaviour was verified by measurements done using an optical setup,...
conference paper 2018
document
Middelburg, L.M. (author), el Mansouri, B. (author), van Zeijl, H.W. (author), Zhang, Kouchi (author), Poelma, René H. (author)
In this work a method is described to investigate process variations across a wafer. Through wafer MEMS spiral resonators were designed, simulated, fabricated and characterized by measuring the eigenfrequency and corresponding mode shapes. Measuring the eigenfrequency and resulting spectral behavior of resonators on different locations on the...
conference paper 2017
document
Li, X. (author), Wei, L. (author), Poelma, René H. (author), Vollebregt, S. (author), Wei, J. (author), Urbach, Paul (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author)
This paper presents a tuneable binary amplitude Fresnel lens produced by wafer-level microfabrication. The Fresnel lens is fabricated by encapsulating lithographically defined vertically aligned carbon nanotube (CNT) bundles inside a polydimethyl-siloxane (PDMS) layer. The composite lens material combines the excellent optical absorption...
journal article 2016
document
Silvestri, C. (author), Riccio, M. (author), Poelma, R.H. (author), Morana, B. (author), Vollebregt, S. (author), Santagata, F. (author), Irace, A. (author), Zhang, G.Q. (author), Sarro, P.M. (author)
Thermal material properties play a fundamental role in the thermal management of microelectronic systems. The porous nature of carbon nanotube (CNT) arrays results in a very high surface area to volume ratio, which makes the material attractive for surface driven heat transfer mechanisms. Here, we report on the heat transfer performance of...
journal article 2016
Searched for: collection%253Air
(1 - 20 of 24)

Pages