Searched for: collection%3Air
(1 - 20 of 99)

Pages

document
Xu, Y. (author), Zhang, H. (author), Šavija, B. (author), Chaves Figueiredo, S. (author), Schlangen, E. (author)
A method is presented to model deformation and fracture behavior of 3D printed disordered lattice materials under uniaxial tensile load. A lattice model was used to predict crack pattern and load-displacement response of the printed lattice materials. To include the influence of typical layered structures of 3D printed materials in the...
journal article 2019
document
Hou, T. (author), Xu, J. (author), Elkhuizen, W.S. (author), Wang, C.C. (author), Jiang, Jiehui (author), Geraedts, J.M.P. (author), Song, Y. (author)
2D coil design limits the use of wireless power transfer (WPT) in many products with freeform outer shapes. In this paper, enabled by 3D printed electronics, we propose a systematic approach to design and fabricate 3D coils for WPT. Based on the circular spiral and rectangular spiral patterns, 3D receiver and transmitter coils can be...
journal article 2019
document
Ren, M. (author), Wang, Shuzhong (author), Yang, Chuang (author), Xu, Haitao (author), Guo, Yang (author), Roekaerts, D.J.E.M. (author)
This work reports an experimental study on supercritical water oxidation of quinoline. Moderate preheat temperature (420 °C–510 °C) and initial concentration (1 wt%–10 wt%) are selected to address the possibility of utilizing the heat released during the reaction, in order to realize high conversion rate at relatively low preheat temperature....
journal article 2019
document
Liu, J. (author), You, X. (author), Huang, H. (author), Batashev, I. (author), Maschek, M. (author), Gong, Yuanyuan (author), Miao, Xuefei (author), Xu, Feng (author), van Dijk, N.H. (author), Brück, E.H. (author)
Ni-Mn-X (X = In, Sn, and Sb) based Heusler alloys show a strong potential for magnetic refrigeration owing to their large magnetocaloric effect (MCE) associated with first-order magnetostructural transition. However, the irreversibility of the MCE under low field change of 0–1 T directly hinders its application as an efficient magnetic coolant....
journal article 2019
document
Chaves Figueiredo, S. (author), Romero Rodriguez, C. (author), Ahmed, Zeeshan Y. (author), Bos, D. H. (author), Xu, Y. (author), Salet, Theo (author), Copuroglu, Oguzhan (author), Schlangen, E. (author), Bos, Freek P. (author)
New additive manufacturing methods for cementitious materials hold a high potential to increase automation in the construction industry. However, these methods require new materials to be developed that meet performance requirements related to specific characteristics of the manufacturing process. The appropriate characterization methods of...
journal article 2019
document
Xu, Y. (author), Borsa, Dana M. (author), Mulder, F.M. (author)
In our efforts to address the issues of Si based anodes for Li ion batteries, such as limited active mass loading, rapid capacity degradation and low scalability in manufacturing, we reported a scalable, high mass loading, and additive-free Si nanoparticles (NP) deposition based electrode, but the achieved capacity and cycle life were still...
journal article 2019
document
Zhang, H. (author), Gan, Y. (author), Xu, Y. (author), Zhang, S. (author), Schlangen, E. (author), Šavija, B. (author)
The aim of this work is to predict the micromechanical properties of interfacial transition zone (ITZ) by combining experimental and numerical approaches. In the experimental part, hardened cement paste (HCP) cantilevers (200 μm × 100 μm × 100 μm) attached to a quartzite aggregate were fabricated and tested using micro-dicing saw and...
journal article 2019
document
Huang, Jizhi (author), Zhang, Y. (author), Ouyang, Xiaowei (author), Xu, Guoyuan (author)
Lagged settlement is a typical accident induced by shield construction in sandy cobble strata. This paper analyzed the process and mechanism of lagged settlement, results show that all phases are in accord with the characteristics of ellipsoid theory of particle flows. Based on this theory, a method for calculating coefficient of lateral...
journal article 2019
document
Farahani, H. (author), Xu, W. (author), van der Zwaag, S. (author)
Controlling the kinetics of austenite decomposition by controlled partitioning of alloying elements, in particular carbon and manganese, is the key factor for optimizing the microstructures of advanced high-strength steels. In this study, a systematic set of computational and experimental cyclic partial phase transformations in low to medium...
journal article 2019
document
Tao, Jianfeng (author), Wang, Zhengbing (author), Zhou, Zeng (author), Xu, Fan (author), Zhang, Changkuan (author), Stive, M.J.F. (author)
The radial sand ridges (denoted as “RSRs” hereafter) in the Southern Yellow Sea, China, are morphologically striking because of the remarkable size and radial planar orientation, standing out as a unique coastal geomorphology among the worldwide sand ridge systems. The formation of this giant fan‐shaped geomorphic feature requires delicate...
journal article 2019
document
Xu, S. (author), Liu, X. (author), Tabaković, Amir (author), Schlangen, E. (author)
Improving the healing capacity of asphalt is proving to be an effective method to prolong the service life of an asphalt pavement. The calcium alginate capsules encapsulating rejuvenator have been developed and proved to provide successful localized crack healing in asphalt mastic. However, it is not known whether this self-healing asphalt...
journal article 2019
document
Xu, S. (author), Tabakovic, A. (author), Liu, X. (author), Palin, D. (author), Schlangen, E. (author)
It has been demonstrated that calcium alginate capsules can be used as an asphalt healing system by pre-placing rejuvenator (healing agent) into the asphalt mix and releasing the rejuvenator on demand (upon cracking). This healing mechanism relies on the properties of capsules which are determined by the capsule preparation process. In this...
journal article 2019
document
Xu, L. (author), Zhai, Wanming (author), Li, Z. (author)
Due to random characteristics of system parameters and excitations, the dynamic assessment and prediction for the train-track-bridge interaction systems become rather complex issues needing to be addressed, especially considering the longitudinal inhomogeneity and uncertainty of dynamic properties in physics and correspondingly their temporal...
journal article 2018
document
Ji, Yangbeibei (author), Xu, Mingwei (author), Li, Jie (author), van Zuylen, H.J. (author)
The macroscopic fundamental diagram (MFD) is a graphical method used to characterize the traffic state in a road network and to monitor and evaluate the effect of traffic management. For the determination of an MFD, both traffic volumes and traffic densities are needed. This study introduces a methodology to determine an MFD using combined...
journal article 2018
document
Zhang, H. (author), Liu, Chun Xiao (author), Gazibegovic, S. (author), Xu, D. (author), Logan, John A. (author), Wang, G. (author), Bommer, J.D.S. (author), de Moor, M.W.A. (author), Car, D. (author), op het Veld, R.L.M. (author), Van Veldhoven, Petrus J. (author), Kölling, S. (author), Verheijen, M.P.A.M. (author), Pendharkar, Mihir (author), Pennachio, Daniel J. (author), Shojaei, Borzoyeh (author), Lee, Joon Sue (author), Palmstrøm, Chris J. (author), Bakkers, E.P.A.M. (author), Sarma, S. Das (author), Kouwenhoven, Leo P. (author)
Majorana zero-modes - a type of localized quasiparticle - hold great promise for topological quantum computing. Tunnelling spectroscopy in electrical transport is the primary tool for identifying the presence of Majorana zero-modes, for instance as a zero-bias peak in differential conductance. The height of the Majorana zero-bias peak is...
journal article 2018
document
Xu, Y. (author), Harks, P.P.R.M.L. (author), Hermes, Dorothee C. (author), Haverkate, Lucas A. (author), Unnikrishnan, Sandeep (author), Mulder, F.M. (author)
Li and Na metals have the highest theoretical anode capacity for Li/Na batteries, but the operational safety hazards stemming from uncontrolled growth of Li/Na dendrites and unstable electrode-electrolyte interfaces hinder their real-world applications. Recently, the emergence of 3D conductive scaffolds aimed at mitigating the dendritic...
journal article 2018
document
Wang, P (author), Chen, Wei (author), Chiang, Fu-Kuo (author), Dugulan, A.I. (author), Song, Yuanjun (author), Pestman, R (author), Zhang, K (author), Yao, Jinsong (author), Feng, Bo (author), Miao, Ping (author), Xu, Wayne (author), Hensen, Emiel J.M. (author)
journal article 2018
document
Xu, Y. (author), Mulder, F.M. (author)
MgH<sub>2</sub> has been considered as a potential anode material for Li ion batteries due to its low cost and high theoretical capacity. However, it suffers from low electronic conductivity and slow kinetics for hydrogen sorption at room temperature that results in poor reversibility, cycling stability and rate capability for Li ion storage....
journal article 2018
document
Lv, Shasha (author), Verhallen, T.W. (author), Vasileiadis, A. (author), Ooms, F.G.B. (author), Xu, Y. (author), Li, Z. (author), Li, Zhengcao (author), Wagemaker, M. (author)
Electrical mobility demands an increase of battery energy density beyond current lithium-ion technology. A crucial bottleneck is the development of safe and reversible lithium-metal anodes, which is challenged by short circuits caused by lithium-metal dendrites and a short cycle life owing to the reactivity with electrolytes. The evolution of...
journal article 2018
document
Xu, L. (author), Huijsing, J.H. (author), Makinwa, K.A.A. (author)
This paper presents a fully integrated shunt-based current sensor that supports a 25-V input common-mode range while operating from a single 1.5-V supply. It uses a highvoltage beyond-the-rails ADC to directly digitize the voltage across an on-chip shunt resistor. To compensate for the shunt’s large temperature coefficient of resistance (∼0.335%...
journal article 2018
Searched for: collection%3Air
(1 - 20 of 99)

Pages