Searched for: collection%3Air
(1 - 20 of 261)

Pages

document
Mulder, Maarten (author), Li, Xuesong X. (author), Nazim, M.M. (author), Dalgliesh, Robert M. (author), Tian, B. (author), Buijse, Marten (author), van Wunnik, John (author), Bouwman, W.G. (author)
O, an alkane, an anionic internal olefin sulfonate surfactant, salt and secondary butyl alcohol (SBA) as co-solvent are studied in a systematic way. In four different sample sets, either the salt content, SBA content or alkane carbon number was varied in order to study the effects of the...
journal article 2019
document
Hedayati, R. (author), Jedari Salami, S. (author), Li, Y. (author), Sadighi, M. (author), Zadpoor, A.A. (author)
We study a special class of mechanical metamaterials, namely lattices, based on beams (struts) with nonuniform cross sections, of which pentamode mechanical metamaterials are a special case. Five symmetric beam types including simple cylinder, concave double cone, convex double cone, concave hyperbolic, and convex hyperbolic are considered....
journal article 2019
document
Ma, Yunjian (author), Li, Yongru (author), Willot, S.J. (author), Zhang, W. (author), Ribitsch, Doris (author), Choi, Young Hae (author), Verpoorte, Robert (author), Hollmann, F. (author), More Authors (author)
...
journal article 2019
document
Li, Z. (author), Zhang, S. (author), Zuo, Y. (author), Chen, Wei (author), Ye, G. (author)
Chemical deformation (chemical shrinkage/expansion), the absolute volume change during reactions, is a key parameter influencing the volume stability, especially the autogenous deformation of a binder material. This work, for the first time, reports an in-depth investigation on the chemical deformation of metakaolin based geopolymer (MKG)....
journal article 2019
document
Li, Y. (author), Zhang, Z. R. (author), Zhao, Z. Y. (author), Li, H. X. (author), Katgerman, L. (author), Zhang, J. S. (author), Zhuang, L. Z. (author)
New 7xxx aluminum alloys with high alloying contents are being designed, which could induce serious hot tearing defects during direct-chill (DC) casting. Among all factors affecting hot tearing of 7xxx alloys, undoubtedly alloying elements play a significant role. In this study, the effect of main alloying elements (Zn, Mg, and Cu) on hot...
journal article 2019
document
Nedeljković, Marija (author), Ghiassi, B. (author), van der Laan, Sieger (author), Li, Z. (author), Ye, G. (author)
The effect of curing conditions (sealed and unsealed) on the pore solution composition and carbonation resistance of different binary alkali-activated fly ash (FA) and ground granulated blast furnace slag (GBFS) pastes is investigated in this study. The studied mixtures were with FA/GBFS ratios of 100:0, 70:30; 50:50, 30:70, 0:100. Ordinary...
journal article 2019
document
Ma, Jiaming (author), Wei, Yinping (author), Gan, Lin (author), Wang, C. (author), Xia, Heyi (author), Lv, Wei (author), Li, Jia (author), Li, Baohua (author), Yang, Quan Hong (author), Kang, Feiyu (author), He, Yan Bing (author)
(LTO) microspheres consisting of densely packed primary nanoparticles. The real space distribution of lithium ions inside the...
journal article 2019
document
Chen, Y. (author), Li, Z. (author), Chaves Figueiredo, S. (author), Copuroglu, Oguzhan (author), Veer, F.A. (author), Schlangen, E. (author)
The goal of this study is to investigate the effects of different grades of calcined clay on the extrudability and early-age strength development under ambient conditions. Four mix designs were proposed. Three of them contained high, medium, and low grades of calcined clay, respectively, and one was the reference without calcined clay. In terms...
journal article 2019
document
Yang, Z. (author), Deng, X. (author), Li, Z. (author)
The modeling of dynamic frictional rolling contact is crucial for accurately predicting behavior and deterioration of structures under dynamic interactions such as wheel/rail, tire/road, bearings and gears. However, reliable modeling of dynamic frictional rolling contact is challenging, because it requires a careful treatment of friction and...
journal article 2019
document
Zheng, M. (author), Wu, Huayi (author), Li, Y. (author)
It is fundamental for 3D city maps to efficiently classify objects of point clouds in urban scenes. However, it is still a large challenge to obtain massive training samples for point clouds and to sustain the huge training burden. To overcome it, a knowledge-based approach is proposed. The knowledge-based approach can explore discriminating...
journal article 2019
document
Liu, Liu (author), Zlatanova, S. (author), Li, Bofeng (author), van Oosterom, P.J.M. (author), Liu, Hua (author), Barton, Jack (author)
An indoor logical network qualitatively represents abstract relationships between indoor spaces, and it can be used for path computation. In this paper, we concentrate on the logical network that does not have notions for metrics. Instead, it relies on the semantics and properties of indoor spaces. A navigation path can be computed by...
journal article 2019
document
Vollmer, I. (author), Kosinov, N. (author), Szecsenyi, Agnes (author), Li, G. (author), Yarulina, I. (author), Abou-Hamad, Edy (author), Gurinov, Andrei (author), Ould-Chikh, Samy (author), Aguilar-Tapia, Antonio (author), Hazemann, Jean-Louis (author), Pidko, E.A. (author), Hensen, Emiel J M (author), Kapteijn, F. (author), Gascon Sabate, J. (author)
The active sites on the methane dehydroaromatization (MDA) catalyst Mo/HZSM-5 are very hard to characterize, because they are present in various geometries and sizes and only form under reaction conditions with methane at 700 °C. To address these issues an experimental strategy is presented that enables distinguishing different active sites...
journal article 2019
document
Schuemann, J. (author), Barbieri, S (author), Brown, J.M.C. (author), Cucinotta, F. A. (author), Li, W. (author), More Authors (author)
Our understanding of radiation-induced cellular damage has greatly improved over the past few decades. Despite this progress, there are still many obstacles to fully understand how radiation interacts with biologically relevant cellular components, such as DNA, to cause observable end points such as cell killing. Damage in DNA is identified...
journal article 2019
document
Zhang, Jian (author), Sokolovskij, R. (author), Chen, Ganhui (author), Zhu, Yumeng (author), Qi, Yongle (author), Lin, Xinpeng (author), Li, Wenmao (author), Zhang, G. (author), Jiang, Yu-Long (author), Yu, Hongyu (author)
S exposure in dry air. A pre...
journal article 2019
document
Yang, Z. (author), Li, Z. (author)
Complex frictional rolling contact and high-frequency wheel dynamic behavior make modeling squeal greatly challenging. The falling-friction effect and wheel mode-coupling behavior are believed to be the two main mechanisms that generate unstable wheel vibration and the resulting squeal noise. To rigorously consider both mechanisms in one...
journal article 2019
document
Wu, Dequan (author), Zhang, D. (author), Ye, Yuwei (author), Ma, Lingwei (author), Minhas, Badar (author), Liu, Bei (author), Terryn, H.A. (author), Mol, J.M.C. (author), Li, Xiaogang (author)
Recently, lubricant-infused surfaces (LIS) have emerged as a prominent class of surface technology for antifouling, anti-icing and anticorrosion applications. However, long-term corrosion exposure and mechanical damages may deteriorate the practical performance of LIS during application. In this study, a robust LIS was fabricated by the...
journal article 2019
document
Li, Z. (author), Nedeljković, Marija (author), Chen, B. (author), Ye, G. (author)
This study investigates the effectiveness of metakaolin (MK)in mitigating the autogenous shrinkage of alkali-activated slag (AAS). It is found that the autogenous shrinkage of AAS paste can be reduced by 40% and 50% when replacing 10% and 20% slag with MK, respectively. By providing additional Si and Al, and decreasing the pH of the pore...
journal article 2019
document
Li, Q. (author), Liu, Xinyuan (author), Eitelberg, G. (author), Veldhuis, L.L.M. (author)
This paper addresses the design of swirl recovery vanes for propeller propulsion in tractor configuration at cruise conditions using numerical tools.Amultifidelity optimization framework is formulated for the design purpose, which exploits low-fidelity potential flow-based analysis results as input for high-fidelity Euler equation-based...
journal article 2019
document
Li, Y. (author), Lietaert, Karel (author), Li, W. (author), Zhang, X.Y. (author), Leeflang, M.A. (author), Zhou, J. (author), Zadpoor, A.A. (author)
The corrosion fatigue behavior of additively manufactured topologically ordered porous iron based on diamond unit cells was studied for the first time to understand its response to cyclic loading in a simulated physiological environment. The material exhibited high fatigue resistance with fatigue strengths being 70% and 65% of yield stress in...
journal article 2019
document
Li, S. (author), Liu, J. (author), Negenborn, R.R. (author)
Over the past two decades, a number of methods have been proposed for solving maritime collision avoidance problems. Most of these works take a single ship's perspective and focus on one-to-one or one-to-many situations. To more complicated many-to-many situations, less attention has been paid. To deal with the many-to-many collision...
journal article 2019
Searched for: collection%3Air
(1 - 20 of 261)

Pages