Searched for: collection%253Air
(1 - 20 of 61)

Pages

document
van de Ven, Daan (author), Hofland, Bas (author), van Kester, Dennis (author), Smith, Greg (author), Antonini, A. (author)
When constructing land reclamations, often sand is placed on top of the coarse rock of the bund surrounding the reclamation. The use of a geometrically open filter between the interface of sand and rock could be cost effective. It is expected that even a geometrically open filter with sand on top of gravel might be stable due to the arching...
conference paper 2023
document
Sui, Xinxin (author), van de Ven, F.H.M. (author)
Low Impact Development (LID) was promoted as an alternative to conventional urban drainage methods. The effects of LID at the site or urban scales have been widely evaluated. This project aims to investigate the impact of LID implementation on basin runoff at a regional scale in a half-urbanized catchment, particularly the overlap of urban...
journal article 2023
document
Haberfehlner, Helga (author), van de Ven, Shankara S. (author), van der Burg, Sven A. (author), Huber, Florian (author), Georgievska, Sonja (author), Aleo, Ignazio (author), Harlaar, J. (author), Bonouvrié, Laura A. (author), van der Krogt, Marjolein M. (author), Buizer, Annemieke I. (author)
Introduction: Video-based clinical rating plays an important role in assessing dystonia and monitoring the effect of treatment in dyskinetic cerebral palsy (CP). However, evaluation by clinicians is time-consuming, and the quality of rating is dependent on experience. The aim of the current study is to provide a proof-of-concept for a machine...
journal article 2023
document
Machairas, Ilias (author), van de Ven, F.H.M. (author)
Due to climate change, droughts will intensify in large parts of the world. Drought and its impacts on nature and agriculture have been studied thoroughly, but its effects on the urban environment is rather unexplored. But also the built environment is susceptible to droughts and estimation of its vulnerability is the first step to its...
review 2022
document
Hooimeijer, F.L. (author), Bricker, J.D. (author), Pel, A.J. (author), Brand, A.D. (author), van de Ven, F.H.M. (author), Askarinejad, A. (author)
Due to the environmental crisis, there is a need for a more conscious and integrating design process within the field of urban infrastructure development. Through cooperation between civil engineering and spatial design resilience of the built environment can be increased. Delft University of Technology investigates interdisciplinary design...
journal article 2022
document
van der Meulen, E. S. (author), van Oel, P. R. (author), Rijnaarts, H. H.M. (author), Sutton, N. B. (author), van de Ven, F.H.M. (author)
Urban surface waters are used in many different ways. With increasing demand for human use functions, improved insight is required into the functional quality of these waters. A method to assess this functional quality in a systematic way and for a wide variety of use functions is not available. We propose to use suitability indices (SIs) for...
journal article 2022
document
van der Meulen, E. Suzanne (author), van de Ven, F.H.M. (author), van Oel, Pieter R. (author), Rijnaarts, Huub H.M. (author), Sutton, Nora B. (author)
Canals and canalized rivers form a major part of surface water systems in European delta cities and societal ambitions to use these waters increase. This is the first assessment of how suitability of these waters can improve for three important uses: transportation, thermal energy extraction (TEE) and recreation. We assess suitability with...
journal article 2022
document
van de Ven, E.A. (author)
This thesis a method is described to include manufacturing constraints of the additive manufacturing process into topology optimization. Topology optimization often results in complex structures, which can only be produced by additive manufacturing. Although additive manufacturing has much fewer design restrictions compared to conventional...
doctoral thesis 2021
document
Abbas, A.E. (author), Agahari, W. (author), van de Ven, Montijn (author), Zuiderwijk-van Eijk, A.M.G. (author), de Reuver, Mark (author)
Data marketplaces are expected to play a crucial role in tomorrow’s data economy but hardly achieve commercial exploitation. Currently, there is no clear understanding of the knowledge gaps in data marketplace research, especially neglected research topics that may contribute to advancing data marketplaces towards commercialization. This study...
conference paper 2021
document
van de Ven, Montijn (author), Abbas, A.E. (author), Roosenboom-Kwee, Z. (author), de Reuver, Mark (author)
Data marketplaces can fulfil a key role in realizing the data economy by enabling the commercial trading of data between organizations. Although data marketplace research is a quickly evolving domain, there is a lack of understanding about data marketplace business models. As data marketplaces are vastly different, a taxonomy of data marketplace...
conference paper 2021
document
Abbas, A.E. (author), Agahari, W. (author), van de Ven, Montijn (author), Zuiderwijk-van Eijk, A.M.G. (author), de Reuver, Mark (author)
Data marketplaces are expected to play a crucial role in tomorrow’s data economy, but such marketplaces are seldom commercially viable. Currently, there is no clear understanding of the knowledge gaps in data marketplace research, especially not of neglected research topics that may advance such marketplaces toward commercialization. This study...
review 2021
document
Chen, Shiyang (author), van de Ven, F.H.M. (author), Zevenbergen, C. (author), Verbeeck, Simon (author), Ye, Qinghua (author), Zhang, Weijun (author), Wei, Liang (author)
Integrating sustainable urban water management into the urban planning process is essential for developing water-resilient cities. To this end, the central government of the People’s Republic of China initiated the “Sponge City” programme. However, challenges and gaps exist in current urban planning practice. The operationalizable planning...
journal article 2021
document
van de Ven, E.A. (author), Maas, Robert (author), Ayas, C. (author), Langelaar, Matthijs (author), van Keulen, A. (author)
Although additive manufacturing (AM) allows for a large design freedom, there are some manufacturing limitations that have to be taken into consideration. One of the most restricting design rules is the minimum allowable overhang angle. To make topology optimization suitable for AM, several algorithms have been published to enforce a minimum...
journal article 2021
document
Misiun, Grzegorz (author), van de Ven, E.A. (author), Langelaar, Matthijs (author), Geijselaers, Hubert (author), van Keulen, A. (author), van den Boogaard, Ton (author), Ayas, C. (author)
An important cause of failure in powder bed additive manufacturing is the distortion of the part due to thermal shrinkage during printing and the relaxation of residual stresses after its release from the base plate. In this paper, Additive Manufacturing simulations are coupled with Topology Optimization in order to generate designs that are...
journal article 2021
document
Virla, Luis D. (author), van de Ven, Dirk Jan (author), Sampedro, Jon (author), van Vliet, Oscar (author), Smith, Alistair (author), Pollitt, Hector (author), Della Santina, C. (author)
Local perspectives can conflict with national and international climate targets. This study explores three stakeholder (community, provincial, and federal) perspectives on the Alberta oil sands as risks for a sustainability transition in Canada. In an ex-post analysis, we compared outputs from stakeholder consultations and energy-economy...
journal article 2021
document
Vollaers, Vita (author), Nieuwenhuis, E.M. (author), van de Ven, F.H.M. (author), Langeveld, J.G. (author)
Despite being widely implemented, sustainable urban drainage systems (SUDS) do not always function flawlessly. While SUDS have been tested extensively and seem to perform well on a laboratory or pilot scale, practitioners’ experience is different: failures in SUDS occur regularly in practice, resulting in malfunctioning systems, water...
journal article 2021
document
van de Ven, E.A. (author), Ayas, C. (author), Langelaar, Matthijs (author), Maas, Robert (author), van Keulen, A. (author)
Additive manufacturing (AM) and topology optimization (TO) have a synergetic relation, as AM can produce complex TO designs, and TO provides high-performance parts that utilize the form freedom provided by AM. Recently, TO has been tailored more toward AM with the inclusion of the minimum allowable overhang angle as a design constraint:...
journal article 2021
document
van der Meulen, E. S. (author), Sutton, N. B. (author), van de Ven, F.H.M. (author), van Oel, P. R. (author), Rijnaarts, H. H.M. (author)
Scientific literature currently lacks comprehensive understanding of urban surface water use functions. This hampers sound analysis of the demand and potential supply of these functions. This study provides a comprehensive overview of potential use functions, by integrating knowledge from ecosystem services and integrated urban water...
journal article 2020
document
van de Ven, F.H.M. (author), Hooimeijer, F.L. (author), Storm, P. (author)
The ambition to Build Back Better after a serious flood disaster is a complex challenge. A comprehensive, multi-disciplinary redevelopment planning process is required to reduce the flood risk and meanwhile create sustainable solutions that bring added value to society every day. General planning principles can be formulated on how to develop...
book chapter 2020
document
Wang, H. (author), Liu, X. (author), van de Ven, Martin (author), Lu, Guoyang (author), Erkens, S. (author), Scarpas, Athanasios (author)
Recently warm mix asphalt (WMA) technologies have been introduced to rubberized asphalt mixtures to decrease the required construction temperatures and to alleviate the hazardous gas emissions. Rubberized asphalt pavements combining with WMA have the potential to improve the long-term pavement performance. This study aims to investigate the...
journal article 2020
Searched for: collection%253Air
(1 - 20 of 61)

Pages