Searched for: collection%3Air
(1 - 20 of 48,346)

Pages

document
Litjens, R. (author), Zhang, Haibin (author)
A suitability assessment and performance optimisation is presented of narrowband Internet of Things (NB-IoT) cellular technology for use in smart energy distribution networks. The focus is on the reliable and timely delivery of outage restoration and management (ORM) messages at the event of a local or regional power outage. Both the cellular...
journal article 2019
document
Brown, B. E. (author), Dunne, R. P. (author), Somerfield, P. J. (author), Edwards, A. J. (author), Simons, W.J.F. (author), Phongsuwan, N. (author), Putchim, L. (author), Anderson, L. (author), Naeije, M.C. (author)
, has not only promoted coral cover...
journal article 2019
document
Zuiderwijk-van Eijk, AMG (author), Spiers, Helen (author)
Open data sharing and re-use is currently more common in some academic disciplines than others. Although each discipline has unique challenges and characteristics which can influence data sharing and re-use behavior, it may be possible to gain transferable insight from disciplines where these practices are more common. Several studies of the...
journal article 2019
document
Yorio, Patrick L. (author), Edwards, J. M. (author), Hoeneveld, D. (author)
National culture colors nearly every aspect of human behavior (Javidan et al., 2006). Despite this truism, the concept has yet to be integrated into organizational safety culture theory. The purpose of this article is to bring awareness as to how national culture can influence organizational safety culture. We do so by theorizing that the...
review 2019
document
Haji Mohammadloo, T. (author), Snellen, M. (author), Simons, D.G. (author), Dierikx, Ben (author), Bicknese, Simon (author)
Methods for gridding multibeam echo sounder (MBES) measurements to equidistant grids are proposed as alternatives to the shallowest measured depth, which is affected by outliers. The approaches considered use a combination of mean and standard deviation of soundings and the regression coefficient from the best fitted plane. These methods...
journal article 2019
document
Saeedifar, M. (author), Mansvelder, Jasmijn (author), Mohammadi, R. (author), Zarouchas, D. (author)
This study aims to use the passive and active acoustic-based health monitoring methods for impact damage assessment of composite structures. To this aim, a Carbon Fiber Reinforced Polymer (CFRP) composite plate was fabricated and subjected to a simulated low-velocity impact by performing repeated quasi-static indentation tests where a loading...
journal article 2019
document
Vita, Gibran (author), Lundström, Johan R. (author), Hertwich, Edgar G. (author), Quist, J.N. (author), Ivanova, Diana (author), Stadler, Konstantin (author), Wood, Richard (author)
The sustainability transformation calls for policies that consider the global consequences of local lifestyles. We used stakeholders' visions of sustainable lifestyles across Europe to build 19 scenarios of sufficiency (net reductions) and 17 of green consumption (shift in consumption patterns). We applied Environmentally Extended Multi...
journal article 2019
document
Watson, S.J. (author), Moro, Alberto (author), Reis, Vera (author), Baniotopoulos, Charalampos (author), Barth, Stephan (author), Bartoli, Gianni (author), Bauer, Florian (author), Jamieson, Peter (author), Schmehl, R. (author), More Authors (author)
This paper represents an expert view from Europe of future emerging technologies within the wind energy sector considering their potential, challenges, applications and technology readiness and how they might evolve in the coming years. These technologies were identified as originating primarily from the academic sector, some start-up...
review 2019
document
Bechtle, Philip (author), Schelbergen, M. (author), Schmehl, R. (author), Zillmann, Udo (author), Watson, S.J. (author)
We compare the available wind resources for conventional wind turbines and for airborne wind energy systems. Accessing higher altitudes and continuously adjusting the harvesting operation to the wind resource substantially increases the potential energy yield. The study is based on the ERA5 reanalysis data which covers a period of 7 years...
journal article 2019
document
Paltrinieri, Nicola (author), Comfort, Louise (author), Reniers, G.L.L.M.E. (author)
Risk assessment has a primary role in safety-critical industries. However, it faces a series of overall challenges, partially related to technology advancements and increasing needs. There is currently a call for continuous risk assessment, improvement in learning past lessons and definition of techniques to process relevant data, which are...
journal article 2019
document
Zhao, Yuan (author), Alderliesten, R.C. (author), Wu, Zengwen (author), Zhou, Zhengong (author), Fang, Guodong (author), Zhang, Jiazhen (author), Benedictus, R. (author)
Finite-width-correction factors (FWCF) are required for GLARE to accurately predict fatigue crack growth using linear elastic fracture mechanics. As demonstrated in earlier work, these factors effectively correct for the change in specimen compliance, which in GLARE relates to intact fibre layers and the formation of delaminations between...
journal article 2019
document
Daneshjoo, Z. (author), Amaral, L. (author), Alderliesten, R.C. (author), Shokrieh, M. M. (author), Fakoor, M. (author)
This paper demonstrates how the critical strain energy density in the delamination tip vicinity may be used to explain the physics of delamination growth under mixed mode I/II. A theory previously proposed to physically relate mode I and mode II delamination growth is further extended towards describing the onset of mixed mode I/II...
journal article 2019
document
Viegas Ochôa De Carvalho, Pedro (author), Fernandez Villegas, I. (author), Groves, R.M. (author), Benedictus, R. (author)
This article presents research about the propagation of ultrasonic guided waves in ultrasonically welded thermoplastic composite joints. The goal of the study was to understand the effect of weld manufacturing defects on guided wave transmission across the joint. Triangular energy-directors integrated into the lower composite adherends...
journal article 2019
document
Farajzadeh, R. (author)
2<...
journal article 2019
document
Hao, C. (author)
In today’s globalizing world an increasing number of companies design products and services for overseas markets and users. Designers face the challenge of creating solutions that fulfil users’ needs, and this becomes more important as the cultural distance between them continues to grow. Unsuccessful international endeavours which resulted in...
doctoral thesis 2019
document
Suresh Kumar, C. (author), Fotouhi, Mohamad (author), Saeedifar, M. (author), Arumugam, V. (author)
This paper investigates the effect of temperature and hybridization on the impact damage evolution and post-impact residual strength of hemp/epoxy, basalt/epoxy and their hybrid laminates, using mechanical and acoustic emission (AE) based analysis. To start with, the specimens were impacted by a drop weight impact tower machine at two...
journal article 2019
document
Du Nguyen, H.A. (author)
In-memory computing is a promising computing paradigm due to its capability to alleviate the memory bottleneck. It has even higher potential when implemented usingmemristive devices ormemristors with various beneficial characteristics such as nonvolatility, high scalability, near-zero standby power consumption, high density, and CMOS...
doctoral thesis 2019
document
van Engelenburg, S.H. (author)
New developments in Information and Communication Technology (ICT), such as big data, the Internet of Things (IoT), and blockchain technology provide opportunities for businesses and government organisations to benefit from business-to-government (B2G) information sharing. For example, big data analytics might provide government organisations...
doctoral thesis 2019
document
Scheper, K.Y.W. (author)
Automatically optimizing robotic behavior to solve complex tasks has been one of
the main, long-standing goals of Evolutionary Robotics (ER). When successful, this
approach will likely fundamentally change the rate of development and deployment
of robots in everyday life. Performing this optimization on real robots can be risky
doctoral thesis 2019
document
Scotuzzi, M. (author)
To follow Moore’s law and the trend of devices to keep shrinking, the nanotechnology industry is challenged in finding a suitable technique for the mass production of integrated circuits with critical dimension in the sub-10 nm range. At the time this project started, EUV lithography, that employs light with a wavelength of 13.5 nm and thus...
doctoral thesis 2019
Searched for: collection%3Air
(1 - 20 of 48,346)

Pages