- document
-
Peng, Y. (author), Zhang, Guanting (author), Nijhuis, S. (author), Agugiaro, G. (author), Stoter, J.E. (author)Historic gardens, regarded as a significant genre of cultural heritage, encapsulate the enduring essence of bygone eras while concurrently transcending temporal boundaries to resonate with the present and future. These gardens provide us vitality and inspiration, holding a collective repository of human memory and serving as a testament to our...journal article 2024
- document
-
Forouzandeh Shahraki, N. (author), Brembilla, E. (author), Nan, L. (author), Stoter, J.E. (author), Jakubiec, Alstan (author)Optimizing the built environment via simulations of building models hinges on standardizing data acquisition. In this research, we put forward distinct levels of detail for geometry and material inputs, specifically tailored for indoor daylight applications. We primarily focus on understanding the uncertainties arising from imprecise...journal article 2024
- document
-
Lei, Binyu (author), Stoter, J.E. (author), Janssen, Patrick (author), Biljecki, Filip (author)To encourage discussion of the challenges hindering the design and implementation of digital twins, the authors have ranked them based on a systematic literature review combined with an expert survey.journal article 2023
- document
-
Hobeika, N. (author), van Rijssel, L.N. (author), Prusti, M.K. (author), Dinklo, C.J.T. (author), Giannelli, D. (author), Dukai, B. (author), Kok, Arnaud (author), van Loon, Rob (author), Nota, René (author), Stoter, J.E. (author)Noise simulations are an important part of noise studies that investigate the impact of noise sources on the environment. In noise simulation, noise levels at receiver points are calculated based on the noise propagation paths between the receiver and source points. These paths are derived from the height of the terrain. In current calculation...journal article 2023
- document
-
Peters, R.Y. (author), Dukai, B. (author), Gao, W. (author), Stoter, J.E. (author)De 3D BAG bevat automatisch gereconstrueerde LoD2-modellen van alle panden in Nederland, en is voor het eerst gereconstrueerd in het voorjaar van 2021 op basis van AHN3.1 Op basis van AHN4 is een nieuwe versie van de 3D BAG gereconstrueerd, in een samenwerking tussen 3DGI en de onderzoeksgroep 3D Geoinformation (TU Delft). AHN4 is niet alleen...journal article 2023
- document
-
Stoter, Stein K.F. (author), Divi, Sai C. (author), van Brummelen, E. Harald (author), Larson, Mats G. (author), de Prenter, Frits (author), Verhoosel, Clemens V. (author)In this article, we study the effect of small-cut elements on the critical time-step size in an immersogeometric explicit dynamics context. We analyze different formulations for second-order (membrane) and fourth-order (shell-type) equations, and derive scaling relations between the critical time-step size and the cut-element size for various...journal article 2023
- document
-
Yang, Z. (author), Ye, Qin (author), Stoter, J.E. (author), Nan, L. (author)Continuous implicit representations can flexibly describe complex 3D geometry and offer excellent potential for 3D point cloud analysis. However, it remains challenging for existing point-based deep learning architectures to leverage the implicit representations due to the discrepancy in data structures between implicit fields and point...journal article 2023
- document
-
Wang, Xufei (author), Yang, Z. (author), Cheng, Xiaojun (author), Stoter, J.E. (author), Xu, Wenbing (author), Wu, Zhenlun (author), Nan, L. (author)Registering point clouds of forest environments is an essential prerequisite for LiDAR applications in precision forestry. State-of-the-art methods for forest point cloud registration require the extraction of individual tree attributes, and they have an efficiency bottleneck when dealing with point clouds of real-world forests with dense...journal article 2023
- document
-
Huang, J. (author), Stoter, J.E. (author), Nan, L. (author)Symmetry widely exists in nature and man-made shapes, but it is unavoidably distorted during the process of growth, design, digitalization, and reconstruction steps. To enhance symmetry, traditional methods follow the detect-then-symmetrize paradigm, which is sensitive to noise in the detection phase, resulting in ambiguities for the...journal article 2023
- document
-
Vitalis, S. (author), Labetski, A. (author), Ledoux, H. (author), Stoter, J.E. (author)Roads are important for many urban planning applications, such as traffic modelling and delivery vehicle routing. At present, most available datasets represent roads only as centrelines. This is particularily true for OpenStreetMap which provides, among many features, road networks at worldwide coverage. Furthermore, most approaches for...journal article 2022
- document
-
Peng, Y. (author), Nijhuis, S. (author), Zhang, Guangting (author), Stoter, J.E. (author), Agugiaro, G. (author)This paper focuses on GIS-based visibility analysis to explore landscape architecture com-positions as a means to understand visual-spatial characteristics and identify related design principles. More specifically, the paper elaborates a practical method to employ high-resolution data acquired by terrestrial LiDAR (Light Detection and Ranging or...journal article 2022
- document
-
Huang, J. (author), Stoter, J.E. (author), Peters, R.Y. (author), Nan, L. (author)We present a fully automatic approach for reconstructing compact 3D building models from large-scale airborne point clouds. A major challenge of urban reconstruction from airborne LiDAR point clouds lies in that the vertical walls are typically missing. Based on the observation that urban buildings typically consist of planar roofs connected...journal article 2022
- document
-
Stoter, J.E. (author)De digital twin wordt gezien als een veelbelovende technologie om grote omgevingsvraagstukken op te lossen, zoals de energieransitie en huisvesting. Maar hoe zorgen we ervoor dat omplementaties niet beperkt blijven tot afzonderlijke - veelal technische - deeloplossingen? Volgens Jantien Stoter kunnen antwoorden komen uit het geo-datadomein dat...journal article 2022
- document
-
Ledoux, H. (author), Dukai, B. (author), Penninga, Friso (author), van den Brink, Linda (author), Stoter, J.E. (author)3D-representaties van onze leefomgeving zijn belangrijk in toepassingen die helpen bij de planning, de inrichting en het beheer van de openbare ruimte. Met 3D-modellen kunnen simulaties worden uitgevoerd voor bijvoorbeeld geluid, energie, luchtkwaliteit, windcomfort, zicht en wateroverlast. Om deze simulaties te bedienen met dezelfde 3D-gegevens...journal article 2022
- document
-
Labetski, A. (author), Vitalis, S. (author), Biljecki, Filip (author), Arroyo Ohori, G.A.K. (author), Stoter, J.E. (author)Urban morphology is important in a broad range of investigations across the fields of city planning, transportation, climate, energy, and urban data science. Characterising buildings with a set of numerical metrics is fundamental to studying the urban form. Despite the rapid developments in 3D geoinformation science, and the growing 3D data...journal article 2022
- document
-
Vitalis, S. (author), Arroyo Ohori, G.A.K. (author), Stoter, J.E. (author)Level of Detail (LoD) is a well known concept in 3D city models, used to designate different geometric detail that can be used in different applications. Nevertheless, multi-LoD datasets are hard to maintain and manage because of their intrinsic complexity. Versioning is a solution that aids in the storage and management of big and complex...journal article 2022
- document
-
Agugiaro, G. (author), Zwamborn, A. (author), Tigchelaar, C. (author), Matthijssen, E. (author), León Sánchez, C.A. (author), van der Molen, Folckert (author), Stoter, J.E. (author)In the last 15 years semantic 3D city models have seen a steady growth in terms of creation and adoption. Many cities world-wide have now at least one city model which can be used for several applications. Energy- and sustainability-related topics are among those that have experienced a noteworthy increase of interest from the Geomatics...journal article 2022
- document
-
Noardo, F. (author), Wu, T. (author), Arroyo Ohori, G.A.K. (author), Krijnen, T.F. (author), Stoter, J.E. (author)To support building permit issuing with automatic digital tools, the reuse of models produced by designers would make the process quicker and more objective. However, current studies and pilots often leave a gap with respect to the models as actually provided by architects, having varying quality and content. In this study, rather than taking...journal article 2022
- document
-
Peters, R.Y. (author), Dukai, B. (author), Vitalis, S. (author), van Liempt, J.N.H. (author), Stoter, J.E. (author)In this paper, we present our workflow to automatically reconstruct three-dimensional (3D) building models based on two-dimensional building polygons and a lidar point cloud. The workflow generates models at different levels of detail (LoDs) to support data require-ments of different applications from one consistent source. Specific attention...journal article 2022
- document
-
Tufan, Ö (author), Arroyo Ohori, G.A.K. (author), León Sánchez, C.A. (author), Agugiaro, G. (author), Stoter, J.E. (author)3D city models are frequently used to acquire and store energy-related information of buildings for energy applications. In this context, CityGML is the most common data model, and the Energy ADE, one of its most complex extensions, provides a systematic way of storing detailed energy-related data in XML format. Contrarily, even though...journal article 2022