Local microbubble concentration by defocused volumetric shadowgraphy with a single camera

The challenge presented in this research is to determine the local volumetric bubble concentration (or void fraction) in the center of a microbubble cloud with limited optical access and without disturbing the flow. By applying defocused volumetric shadowgraphy to an aerated water column we were able to measure the characteristics of single...

Time-slice wavefield decomposition

We propose a novel acoustic decomposition operator for time slices, loosely based on conventional surface decomposition operators. The proposed operators hold for constant velocity models and require two 2D Fourier Transforms (one forward, one backward) per decomposed time slice per decomposition direction. We then demonstrate the capabilities...

From closed-boundary to single-sided homogeneous Green's function representations

The homogeneous Green’s function (i.e., the Green’s function and its time-reversed counterpart) plays an important role in optical, acoustic and seismic holography, in inverse scattering methods, in the field of time-reversal acoustics, in reversetime migration and in seismic interferometry. Starting with the classical closed-boundary...

Light-sheet optimization for microscopy

Aberrations, scattering and absorption degrade the performance light-sheet fluorescence microscopes (LSFM). An adaptive optics system to correct for these artefacts and to optimize the light-sheet illumination is presented. This system allows a higher axial resolution to be recovered over the field-of-view of the detection objective. It is...

Marchenko wavefield redatuming, imaging conditions, and the effect of model errors

Recently, a novel method to redatum the wavefield in the sub-surface from a reflection response measured at the surface has gained interest for imaging primaries in the presence of strong internal multiples. A prerequisite for the algorithm is an accurate and correct estimate of the direct-wave Green's function. However, usually we use an...

Wavefront coding with adaptive optics

We have implemented an extended depth of field optical system by wavefront coding with a micromachined membrane deformable mirror. This approach provides a versatile extension to standard wavefront coding based on fixed phase mask. First experimental results validate the feasibility of the use of adaptive optics for variable depth wavefront...

Design of an efficient 900 GHz antenna in standard CMOS technology for imaging arrays

This paper describes and addresses the challenges that are encountered while designing a 900 GHz antenna for FET detectors using a standard submicron CMOS technology. The reduced metal stack, the problem of surface waves and technology-related rules are taken into account in order to properly design an efficient antenna, with the objective to...

Autofocusing imaging: Imaging with primaries, internal multiples and free-surface multiples

Recent work on autofocusing with the Marchenko equation has shown how the Green's function for a virtual source in the subsurface can be obtained from reflection data. The response to the virtual source is the Green's function from the location of the virtual source to the surface. The Green's function is retrieved using only the reflection...

On the focusing conditions in time-reversed acoustics, seismic interferometry, and Marchenko imaging

Despite the close links between the fields of time-reversed acoustics, seismic interferometry and Marchenko imaging, a number of subtle differences exist. This paper reviews the various focusing conditions of these methods, the causality/acausality aspects of the corresponding focusing wavefields, and the requirements with respect to...

Non-linear imaging condition to image fractures as non-welded interfaces

Hydraulic properties of a fractured reservoir are often controlled by large fractures. In order to seismically detect and characterize them, a high-resolution imaging method is necessary. We apply a non-linear imaging condition to image fractures, considered as non-welded interfaces. We derive the imaging condition from the general correlation...

3-D acquisition geometry analysis: Incorporating information from multiples

Recent advances in survey design have led to conventional common-midpoint-based analysis being replaced by the subsurface-based seismic acquisition analysis and design, with the emphasis on advance techniques of illumination analysis. Amongst them are wave-equation-based seismic illumination analyses such as the so-called focal beam method. The...

Green's function retrieval with Marchenko equations: A sensitivity analysis

Recent research showed that the Marchenko equation can be used to construct the Green’s function for a virtual source position in the subsurface. The method requires the reflection response at the surface and an estimate of the direct arrival of the wavefield, traveling from the virtual source location to the acquisition surface. In this paper,...

Mixing material modes

We present a novel setup in which real objects made of different materials can be mixed optically. For the materials we chose mutually very different materials, which we assume to represent canonical modes. The appearance of 3D objects consisting of any material can be described as linear superposition of 3D objects of different canonical...

Inversion of seismic reflection data through focusing

Since most of the easy hydrocarbon reservoirs have been found, accurate sub-surface imaging for oil and gas exploration and production is crucial. Seismic data can provide a band-limited reconstruction of impedance contrasts between different rock formations as well as a subsurface velocity model. Current compute power allows for the use of the...