Low noise NbN hot electron bolometer mixer at 4.3?THz

We have studied the sensitivity of a superconducting NbN hot electron bolometer mixer integrated with a spiral antenna at 4.3?THz. Using hot/cold blackbody loads and a beam splitter all in vacuum, we measured a double sideband receiver noise temperature of 1300?K at the optimum local oscillator (LO) power of 330?nW, which is about 12 times the...

Influence of the direct response on the heterodyne sensitivity of hot electron bolometer mixers

We present a detailed experimental study of the direct detection effect in a small volume (0.15??m×1??m×3.5?nm) quasioptical NbN phonon cooled hot electron bolometer mixer at 673?GHz. We find that the small signal noise temperature, relevant for an astronomical observation, is 20% lower than the noise temperature obtained using 300 and 77?K...

Current-induced vortex unbinding in bolometer mixers

We present a description of the current-voltage characteristics of hot electron bolometers in terms of the current-dependent intrinsic resistive transition of NbN films. We find that, by including this current dependence, we can correctly predict the complete current-voltage characteristics, showing excellent agreement with measurements for both...

Terahertz heterodyne receiver based on a quantum cascade laser and a superconducting bolometer

We report the first demonstration of an all solid-state heterodyne receiver that can be used for high-resolution spectroscopy above 2?THz suitable for space-based observatories. The receiver uses a NbN superconducting hot-electron bolometer as mixer and a quantum cascade laser operating at 2.8?THz as local oscillator. We measure a double...

Direct detection effect in small volume hot electron bolometer mixers

We measure the direct detection effect in a small volume (0.15??m×1??m×3.5?nm) quasioptical NbN phonon cooled hot electron bolometer mixer at 1.6?THz. We find that the small signal sensitivity of the receiver is underestimated by 35% due to the direct detection effect and that the optimal operating point is shifted to higher bias voltages when...

Doubling of sensitivity and bandwidth in phonon cooled hot electron bolometer mixers

We demonstrate that the performance of NbN lattice cooled hot electron bolometer mixers depends strongly on the interface quality between the bolometer and the contact structure. We show experimentally that both the receiver noise temperature and the gain bandwidth can be improved by more than a factor of 2 by cleaning the interface and adding...