Searched for: collection%3Air
(1 - 20 of 17,427)

Pages

document
Sánchez-Arriaga, Gonzalo (author), Pastor-Rodríguez, Alejandro (author), Sanjurjo-Rivo, Manuel (author), Schmehl, R. (author)
A parallelized flight simulator for the dynamic analysis of airborne wind energy (AWE) systems for ground- and fly-generation configurations is presented. The mechanical system comprises a kite or fixed-wing drone equipped with rotors and linked to the ground by a flexible tether. The time-dependent control vector of the simulator mimics real...
journal article 2019
document
Caro Ortiz, S.A. (author), Hens, R. (author), Zuidema, Erik (author), Rigutto, Marcello (author), Dubbeldam, David (author), Vlugt, T.J.H. (author)
This article explores how well vapor-liquid equilibria of pure components and binary mixtures of xylenes can be predicted using different force fields in molecular simulations. The accuracy of the Wolf method and the Ewald summation is evaluated. Monte Carlo simulations in the Gibbs ensemble are performed at conditions comparable to...
journal article 2019
document
Vuik, V. (author), Borsje, Bas W. (author), Willemsen, Pim W.J.M. (author), Jonkman, Sebastiaan N. (author)
Flood risks are increasing worldwide due to climate change and ongoing economic and demographic development in coastal areas. Salt marshes can function as vegetated foreshores that reduce wave loads on coastal structures such as dikes and dams, thereby mitigating current and future flood risk. This paper aims to quantify long-term (100 years)...
journal article 2019
document
Gamarino, M. (author), Dall'Osso, Aldo (author), Lathouwers, D. (author), Kloosterman, J.L. (author)
In reactor core nodal analysis, the dependence of few-group, homogenized cross sections on the local physical conditions (i.e., the thermal-hydraulic state and material composition) is commonly represented via multivariate interpolation in parameterized libraries. In this paper, we propose a novel approach to model the spectral effects of...
journal article 2019
document
Cheraghi, Morteza (author), Eslami Baladeh, Aliakbar (author), Khakzad Rostami, N. (author)
Hazard and Operability analysis (HAZOP) is a popular technique for hazard identification and risk ranking in hazardous facilities. Conventional HAZOP, however, has some drawbacks: (i) it considers a limited number of risk factors, i.e., only the frequency and the severity of hazards; (ii) it assumes equal weights for the risk factors, thus...
journal article 2019
document
Marín, Luis Gabriel (author), Cruz, Nicolás (author), Sáez, Doris (author), Sumner, Mark (author), Nunez Vicencio, Alfredo (author)
Prediction interval modelling has been proposed in the literature to characterize uncertain phenomena and provide useful information from a decision-making point of view. In most of the reported studies, assumptions about the data distribution are made and/or the models are trained at one step ahead, which can decrease the quality of the...
journal article 2019
document
Kocaman, E.S. (author), Chen, B. Y. (author), Pinho, S. T. (author)
This paper presents a new polymorphic element modelling approach for multi-scale simulation, with an application to fracture in composite structures. We propose the concept of polymorphic elements; these are elements that exist as an evolving superposition of various states, each representing the relevant physics with the required level of...
journal article 2019
document
Rovira Navarro, M. (author), Rieutord, Michel (author), Gerkema, Theo (author), Maas, Leo R.M. (author), van der Wal, W. (author), Vermeersen, L.L.A. (author)
Some of the moons of the outer solar system harbour subsurface liquid oceans. Tidal dissipation plays an important role in preventing these oceans from freezing. In the past, most studies considered only tidal dissipation in the solid layers of these bodies (rock and ice). Recently, new studies considering tidal dissipation in the oceans of...
journal article 2019
document
Abushaban, Almotasembellah (author), Salinas Rodriguez, S.G. (author), Mangal, M.N. (author), Mondal, Subhanjan (author), Goueli, Said A. (author), Magic-Knezev, Aleksandra (author), Vrouwenvelder, J.S. (author), Schippers, Jan C. (author), Kennedy, M.D. (author)
) as the seawater matrix interferes with ATP measurement. In...
journal article 2019
document
Nguyen, T.T. (author), Krishnakumari, P.K. (author), Calvert, S.C. (author), Vu, Hai L. (author), van Lint, J.W.C. (author)
Classification of congestion patterns is important in many areas in traffic planning and management, ranging from policy appraisal, database design, to prediction and real-time control. One of the key constraints in applying machine learning techniques for classification is the availability of sufficient data (traffic patterns) with clear and...
journal article 2019
document
Cinti, G (author), Bidini, G. (author), Hemmes, K. (author)
Solid oxide fuel cell systems for combined heat and power production (SOFC μCHP) fueled by natural gas are attractive because of their high electrical and total efficiency even at small scale. The development of a hydrogen economy will increase the availability of distributed hydrogen as a pure gas. Alternatively, hydrogen may be blended with...
journal article 2019
document
Kroesen, M. (author)
Introduction: Behavioral health risk factors are major causes of morbidity and mortality worldwide. The four main risk factors, the so-called SNAP-factors, relate to smoking, nutrition, alcohol consumption and physical inactivity. A consistent finding in health research is that these behaviors tend to cluster together, thereby resulting in...
journal article 2019
document
Ma, Jiliang (author), van Ommen, J.R. (author), Liu, Daoyin (author), Mudde, R.F. (author), Chen, Xiaoping (author), Wagner, E.C. (author), Liang, Cai (author)
Due to the presence of inter-particle cohesive force, cohesive particles reveal totally different fluidization behaviors as compared to the non-cohesive system. This paper studies the fluidization dynamics of Geldart B particles with varying thermal-induced cohesive forces. Multi-source X-ray tomography was applied to reconstruct 3D temporal...
journal article 2019
document
Peeters, D.M.J. (author), Irisarri, François Xavier (author), Groenendijk, Chris (author), Růžek, Roman (author)
Composite materials are finding increasing application, for example in commercial aircraft. Traditionally fiber angles are restricted to 0°,±45° and 90°. The current work exploits the possibility of using multiple ’non-conventional’ laminates where either fiber steering (‘variable stiffness’), ply drops (‘variable thickness’), or a...
journal article 2019
document
Labans, E. (author), Bisagni, C. (author)
The ability to steer carbon fibre tapes, varying the tow angle, can widen the designs possibilities of cylindrical shells that are one of the main components of aerospace structures. This research presents experimental and numerical investigation of two carbon fibre reinforced plastic cylindrical shells – a cylinder with conventional layup made...
journal article 2019
document
Kaller, Thomas (author), Pasquariello, Vito (author), Hickel, S. (author), Adams, Nikolaus A. (author)
and an average Nusselt number of Nuxz = 371. The geometry and boundary conditions follow an experimental reference case and good agreement...
journal article 2019
document
Agliata, R. (author), Bogaard, T.A. (author), Greco, Roberto (author), Minardo, Aldo (author), Mollo, Luigi (author), Steele-Dunne, S.C. (author)
Undesired presence of water in historical masonries has a negative effect on the walls and causes deterioration of decorative works covering the walls, such as frescoes and valuable plasters. To prevent this, non-invasive moisture measurements are needed that avoid damage during masonry inspection caused by sample taking or probe insertion....
journal article 2019
document
Esposito, R. (author), Messali, F. (author), Ravenshorst, G.J.P. (author), Schipper, H.R. (author), Rots, J.G. (author)
The exploitation of geo-resources in the northern part of the Netherlands (Groningen region) is triggering shallow earthquakes, rising the need of assessing the current building stock. Being the region not prone to tectonic earthquakes, buildings are designed as wind-resistant systems and have specific characteristics that can limit their...
journal article 2019
document
Lu, X. (author), Ridha, M. (author), Chen, B. Y. (author), Tan, V. B.C. (author), Tay, T. E. (author)
The cohesive element (CE) has been widely used to model delamination in laminated composites. The penalty stiffness, interfacial strength and fracture toughness are three CE parameters that often determine the accuracy of the numerical analysis by finite elements (FEs). The fracture toughness may be experimentally determined through standard...
journal article 2019
document
Rajpal, D. (author), Gillebaart, E. (author), De Breuker, R. (author)
Including a gust analysis in an optimization framework is computationally expensive as the critical load cases are not known a priori and hence a large number of points within the flight envelope have to be analyzed. Model order reduction techniques can provide significant improvement in computational efficiency of an aeroelastic analysis. In...
journal article 2019
Searched for: collection%3Air
(1 - 20 of 17,427)

Pages